I was a costume designer"
Release time:
2020-07-22
made a "Fashion Designer "
# August 16 morning meeting. Inspired by the production department, our department's logistics sales staff also joined the ranks of turnover tray "Change " for the cable tray winding post. After the morning meeting of
, we had a simple training together, and then we claimed the dishes together. Because the office needs someone to stay behind to place orders, check accounts, issue invoices and other work, so we decided to deal with two people in the morning, two people in the afternoon, two rotation. After listening to the theoretical explanation,
entered the actual hands-on process and entered the "model " waiting constituency. what came into my eyes were a number of slightly greasy and damaged iron guys. The first link is to make "new clothes " for the dishes, and cut 6 pieces of small "clothes " with 1/4 round area on the carpet with a specific mold. unlike others, I like to be more serious. first, I use the template to make gestures on the carpet, see which scheme has the highest utilization rate, the least waste and the most reasonable scheme for welt cutting. Small "Clothes " with templates for reference is relatively easy. Facing the plates without templates for reference, how many carpets need to be wrapped on the inner diameter? I asked Master Zheng Xuzhen, who has changed the plates for several days. However, she has not wrapped clothes for the big belly of the iron plate, so there is no reference basis. So we groped together and measured the inner diameter width of the plate with a tape measure. The inner diameter area is a cylinder. In order to find out how much material to use, I also specially measured the waist circumference of the iron plate.
The second part is to scrub the plate "" . After the old "clothes " on the iron plate are replaced, there is a lot of old glue that needs to be removed. The shovel blade and wire brush went into battle. My partner and I were alone and finished soon. The third link is also the most critical link. To give the plate "to wear new clothes " , you need to brush glue twice, with an interval of 10 . The carpet can be better glued to the iron plate after the first backing and the glue is brushed again. After the new clothes are changed, we will immediately loosen the bones of the iron plate, knock on the back, and knock with a special silicone hammer, especially for hemming. The quality of hemming is not good, and the carpet is easy to peel off during use. This link specially asked Master Zheng to focus on inspection and guidance, and rectify the deficiencies on site. After the completion of
, the iron guy in "new clothes " , which we made by ourselves, took on a new look and looked very beautiful, and my heart was also very happy. (Zong Ning)
More information
Publicity of Environmental Protection Acceptance for Completion of Kiln End Flue Gas Desulfurization Project of daye peak cement co., ltd. According to the requirements of the Interim Measures for Environmental Protection Acceptance for Completion of Construction Projects (No.4 [2017] of the State Environmental Regulations) issued by the Ministry of Environmental Protection, the environmental protection acceptance information of "Kiln End Flue Gas Desulfurization Project" of daye peak cement co., ltd. is now publicized. Basic Information of 1. Project Project Name: Kiln End Flue Gas Desulfurization Project Construction Unit: daye Jianfeng Cement Co., Ltd. Project Construction Location: Yongguang Village, Baoan Town, daye city, nature of the project in the existing plant area of daye Jianfeng Cement Co., Ltd.: The construction content of the technological transformation project is: This technological transformation project is mainly to build a wet desulfurization system for kiln end gas of the company's existing 4000t cement clinker production line, adopting limestone-gypsum wet flue gas desulfurization process. The project covers a total area of 500 m2, with a new construction area of about 450 m2. It mainly builds desulfurization complex building, flue gas system, SO2 absorption system, limestone powder conveying and limestone slurry preparation system, process water system, gypsum dehydration system and supporting pipelines. Power supply, water supply, compressed air and other public works rely on the existing plant. Total investment and environmental protection investment: the total investment of the project is 10.37 million yuan, all of which are environmental protection investment. The project was entrusted to Huangshi Yangtze River Environmental Engineering Design and Research Institute to carry out environmental impact assessment in September 2017. On November 16, 2017, Daye Municipal Environmental Protection Bureau issued a reply with YEHAN [2017] No. 354. Implementation of 2. environmental protection measures The scope of this acceptance is the flue gas desulfurization system and supporting facilities at the end of the kiln. (1) Exhaust gas pollution
2020
07-31
Spike New Drug Approved for Registration
On April 16, Jianfeng Pharmaceutical Company received the approval and issuance of Olopatadine Hydrochloride Eye Drops "Drug Registration Approval" (approval number: 2019S00296) approved by the State Drug Administration. Olopatadine hydrochloride eye drops is mainly used to treat the signs and symptoms of allergic conjunctivitis. It is a mast cell stabilizer and a relatively selective histamine H1-receptor antagonist. It can inhibit type I immediate allergic reactions in vivo and in vitro experiments. At present, the product has been included in the "National Basic Medical Insurance, Work Injury Insurance and Maternity Insurance Drug Catalog (2017 Edition)" and classified as Class B. According to the relevant data of IMS database, in 2018, the global sales of olopatadine hydrochloride eye drops were about 0.37 billion US dollars, and the sales in China were about 10.232 million US dollars. Spike Pharmaceuticals already has the corresponding production line, this time to obtain the registration approval, marking Spike Pharmaceuticals has the qualification to carry out the production and sales of olopatadine hydrochloride eye drops, will further enrich the product line of Spike Pharmaceuticals, help to enhance the competitiveness of the company's pharmaceutical business. (Xia Yingpin)
2020
07-31
Spike New Drug Approved for Registration
On April 16, Jianfeng Pharmaceutical Company received the approval and issuance of Olopatadine Hydrochloride Eye Drops "Drug Registration Approval" (approval number: 2019S00296) approved by the State Drug Administration. Olopatadine hydrochloride eye drops is mainly used to treat the signs and symptoms of allergic conjunctivitis. It is a mast cell stabilizer and a relatively selective histamine H1-receptor antagonist. It can inhibit type I immediate allergic reactions in vivo and in vitro experiments. At present, the product has been included in the "National Basic Medical Insurance, Work Injury Insurance and Maternity Insurance Drug Catalog (2017 Edition)" and classified as Class B. According to the relevant data of IMS database, in 2018, the global sales of olopatadine hydrochloride eye drops were about 0.37 billion US dollars, and the sales in China were about 10.232 million US dollars. Spike Pharmaceuticals already has the corresponding production line, this time to obtain the registration approval, marking Spike Pharmaceuticals has the qualification to carry out the production and sales of olopatadine hydrochloride eye drops, will further enrich the product line of Spike Pharmaceuticals, help to enhance the competitiveness of the company's pharmaceutical business. (Xia Yingpin)
2020
07-31
Contact Us
No. 88 Wujiang East Road, Jinhua City, Zhejiang Province, China
Tel: +86-579-82326868
Fax : +86-579-82324666
©2023 Zhejiang Jianfeng Group Co., Ltd. Powered by: www.300.cn SEO Business License
SAF Coolest v1.2 设置面板 SHJSS-AHDB-FSSQE-ZSW
无数据提示
Sorry, the current column has no content !
You can view other columns or return to Home Page