Safety management education first
Release time:
2020-07-22
Safety Management Education First
In safety management, people are not only the main body of implementation management, but also the main body of implementation of various safety systems and operation procedures. They are the primary and decisive factor in safety management and the main factor in determining whether safety management is scientifically and effectively implemented. DuPont 200 years of safety management experience clearly believes that the root cause of accidents 96% comes from unsafe human behavior. At the same time, we carefully analyze some accidents in recent years, most of which are due to the weak safety awareness of employees and illegal operation, which leads to the occurrence of tragedies. Therefore, to do a good job in safety management, we must first do a good job in everyone's safety management, that is, to do a good job in safety education for everyone. Safety management education first, embodies the principle of safety management, prevention first.
People agree on the importance of safety, but it may not attract everyone's attention and attention. The continuous occurrence of safety accidents, "three violations" and bad behaviors illustrate this point. These are the performance of employee safety awareness is not strong, but through all levels of training and education can be significantly improved.
New employees are not familiar with the environment because they are new here, which is easy to cause safety accidents. Therefore, new employees must pass the three-level safety education and training, and under the leadership of experienced teachers, they must practice for a period of time before they can take up their posts independently, and fully do a good job of "passing, helping and leading", so that the good work style and operation experience of the team and the teachers can be better continued, and new employees can develop good operation habits and correct operation procedures from the beginning, so as to reduce the probability of accidents. If employees do not go through safety education and master relevant safety knowledge and safety skills, employees will not be able to adapt to the working environment, and they will not be able to operate correctly and safely, and they will not be able to ensure safe production. If employees should keep in mind the knowledge of their posts, be familiar with safety rules and regulations, carry out operations as required, pay attention to every detail of safe production, and earnestly operate according to regulations, then production safety will be guaranteed. The safety awareness of employees can only be established through the training and education of managers. Safety education and training is one of the important contents for enterprises to implement the main responsibility of safety production, and it is also the most important and basic work in safety production.
After years of job operations, old employees often have fluke, blind self-confidence, bravado and other psychology, which will cause safety accidents. Safety managers should take the psychological and awareness of employees' insecurity as the focus and key to grasp. Safety education and training is a hard and long process, because everyone has "inertia". As time goes by, we will greatly reduce the relevant regulations in terms of time and content, and deal with it. Therefore, education and training should always ring the alarm bell, constantly grasp unremitting, persevere, step by step, and constantly innovate, so as to make education and training effective, practical and operable, and eliminate people's unsafe behavior, so as to fundamentally improve the quality of workers and ensure safety. Let every employee bear in mind the principle that "the rules and regulations are stained with blood, and there is no need to use blood for verification". It is possible to confirm safety before starting work. Safe production is the primary premise in the production process, and unsafe non-production is effectively achieved.
Security managers need regular training and learning to keep up with the pace of social and corporate development. Safety management personnel should continuously improve their own quality, enhance their professional ability, innovate their working methods, regularly hold safety knowledge training courses for safety management personnel (including team leaders) and strictly assess them, and regularly organize centralized training and visits for safety management personnel, so that safety management personnel can be familiar with the laws, regulations, standards, norms, safety management system and safety regulations related to safety production, and master safety professional knowledge comprehensively, understand and learn the advanced management experience of peer companies to enhance the sense of responsibility of safety management personnel, improve the business and technical level of safety management personnel, on-site safety management level, and on-site safety risk management and control capabilities. According to the investigation and analysis, the accidents caused by the weak safety awareness and lack of safety knowledge of employees account for a large proportion.
Safety in production is the premise of all work. Safety in production and education should go first. Safety education is a long-term and continuous process. Only when there is a long-term awareness of safety production in the heart, will the string of safety production be tightened during the construction and production process. Only when safe production is done well can the big family of peak develop continuously in stability. (Cable Company Lu Chaofang)
More information
Tianjin Flemish Company Donates Anti-epidemic Materials
On the morning of July 13, Tianjin Jianfeng Flanders Pharmaceutical Technology Development Co., Ltd. donated materials to the Tianjin Development Zone Charity Association to help the development zone community fight the epidemic.
2020
08-05
In late July, leaders of the group company Jiang Xiaomeng, Yu Jianhong, Chen Tianci and Qin Xuping visited subordinate enterprises separately and sent heatstroke prevention and cooling supplies to employees working under high temperature, urging everyone to pay attention to heatstroke prevention and cooling and safe production work to ensure good physical condition.
2020
08-05
On July 17 and 18, the Group's work analysis meeting for the first half of 2020 was held at the Peak Building of the Group's headquarters to summarize and review the work in the first half of the year and make arrangements for the work in the second half of the year.
2020
08-05
The company requires to do a good job in summer safety production
The high temperature season is approaching, and the group company issued a notice a few days ago to make arrangements for safe production in summer.
2020
08-05
The company requires to do a good job in summer safety production
The high temperature season is approaching, and the group company issued a notice a few days ago to make arrangements for safe production in summer. The notice requires all subordinate units of the company to attach great importance to the work of production safety in summer, and all production and business units should hold a special meeting on production safety in summer. According to the characteristics of production in summer, they should focus on safety risk analysis for mines, outdoor operations and high-temperature posts, and implement control measures to avoid the occurrence of safety accidents such as scalding, heatstroke and electric shock. In order to further strengthen the safety production management in the high temperature season, the notice requires the main person in charge of each production and business unit to lead a team to conduct a comprehensive inspection of the production and business premises according to the characteristics of summer production; strengthen the daily safety production inspection of key posts and special posts; timely rectify the found unsafe behaviors and hidden dangers; Strengthen the management of the storage and use of flammable, explosive, dangerous chemicals and drugs; cooling measures shall be taken for the space exceeding the storage temperature limit of articles. If it is found that the electrical equipment circuit and exhaust fan circuit are aged and damaged, replace them in time and keep the grounding wire in good condition. Do a good job in checking the fire pool, pipeline water pressure and fire extinguishing equipment to ensure that the fire fighting facilities are sensitive, intact and reliable. The high temperature in summer is also a period of frequent occurrence of heatstroke and other diseases. The notice requires all units to do a good job in heatstroke prevention and cooling, implement various relevant measures, and equip necessary cooling facilities or materials such as fans, air conditioners, ice cubes and other cooling facilities or materials according to the conditions of the production site; do a good job in the distribution of heatstroke prevention drugs, supplies and cool drinks in workshops, warehouses, construction sites and other production lines; strengthen canteen management to prevent food poisoning. (this newspaper reporter)
2020
07-22
The company requires to do a good job in summer safety production
The high temperature season is approaching, and the group company issued a notice a few days ago to make arrangements for safe production in summer. The notice requires all subordinate units of the company to attach great importance to the work of production safety in summer, and all production and business units should hold a special meeting on production safety in summer. According to the characteristics of production in summer, they should focus on safety risk analysis for mines, outdoor operations and high-temperature posts, and implement control measures to avoid the occurrence of safety accidents such as scalding, heatstroke and electric shock. In order to further strengthen the safety production management in the high temperature season, the notice requires the main person in charge of each production and business unit to lead a team to conduct a comprehensive inspection of the production and business premises according to the characteristics of summer production; strengthen the daily safety production inspection of key posts and special posts; timely rectify the found unsafe behaviors and hidden dangers; Strengthen the management of the storage and use of flammable, explosive, dangerous chemicals and drugs; cooling measures shall be taken for the space exceeding the storage temperature limit of articles. If it is found that the electrical equipment circuit and exhaust fan circuit are aged and damaged, replace them in time and keep the grounding wire in good condition. Do a good job in checking the fire pool, pipeline water pressure and fire extinguishing equipment to ensure that the fire fighting facilities are sensitive, intact and reliable. The high temperature in summer is also a period of frequent occurrence of heatstroke and other diseases. The notice requires all units to do a good job in heatstroke prevention and cooling, implement various relevant measures, and equip necessary cooling facilities or materials such as fans, air conditioners, ice cubes and other cooling facilities or materials according to the conditions of the production site; do a good job in the distribution of heatstroke prevention drugs, supplies and cool drinks in workshops, warehouses, construction sites and other production lines; strengthen canteen management to prevent food poisoning. (this newspaper reporter)
2020
07-31
Contact Us
No. 88 Wujiang East Road, Jinhua City, Zhejiang Province, China
Tel: +86-579-82326868
Fax : +86-579-82324666
©2023 Zhejiang Jianfeng Group Co., Ltd. Powered by: www.300.cn SEO Business License
SAF Coolest v1.2 设置面板 SHJSS-AHDB-FSSQE-ZSW
无数据提示
Sorry, the current column has no content !
You can view other columns or return to Home Page