News Center

Home page

Peak Report

News reports

Safety management education first

Release time:

2020-07-22

Safety Management Education First

In safety management, people are not only the main body of implementation management, but also the main body of implementation of various safety systems and operation procedures. They are the primary and decisive factor in safety management and the main factor in determining whether safety management is scientifically and effectively implemented. DuPont 200 years of safety management experience clearly believes that the root cause of accidents 96% comes from unsafe human behavior. At the same time, we carefully analyze some accidents in recent years, most of which are due to the weak safety awareness of employees and illegal operation, which leads to the occurrence of tragedies. Therefore, to do a good job in safety management, we must first do a good job in everyone's safety management, that is, to do a good job in safety education for everyone. Safety management education first, embodies the principle of safety management, prevention first.

People agree on the importance of safety, but it may not attract everyone's attention and attention. The continuous occurrence of safety accidents, "three violations" and bad behaviors illustrate this point. These are the performance of employee safety awareness is not strong, but through all levels of training and education can be significantly improved.

New employees are not familiar with the environment because they are new here, which is easy to cause safety accidents. Therefore, new employees must pass the three-level safety education and training, and under the leadership of experienced teachers, they must practice for a period of time before they can take up their posts independently, and fully do a good job of "passing, helping and leading", so that the good work style and operation experience of the team and the teachers can be better continued, and new employees can develop good operation habits and correct operation procedures from the beginning, so as to reduce the probability of accidents. If employees do not go through safety education and master relevant safety knowledge and safety skills, employees will not be able to adapt to the working environment, and they will not be able to operate correctly and safely, and they will not be able to ensure safe production. If employees should keep in mind the knowledge of their posts, be familiar with safety rules and regulations, carry out operations as required, pay attention to every detail of safe production, and earnestly operate according to regulations, then production safety will be guaranteed. The safety awareness of employees can only be established through the training and education of managers. Safety education and training is one of the important contents for enterprises to implement the main responsibility of safety production, and it is also the most important and basic work in safety production.

After years of job operations, old employees often have fluke, blind self-confidence, bravado and other psychology, which will cause safety accidents. Safety managers should take the psychological and awareness of employees' insecurity as the focus and key to grasp. Safety education and training is a hard and long process, because everyone has "inertia". As time goes by, we will greatly reduce the relevant regulations in terms of time and content, and deal with it. Therefore, education and training should always ring the alarm bell, constantly grasp unremitting, persevere, step by step, and constantly innovate, so as to make education and training effective, practical and operable, and eliminate people's unsafe behavior, so as to fundamentally improve the quality of workers and ensure safety. Let every employee bear in mind the principle that "the rules and regulations are stained with blood, and there is no need to use blood for verification". It is possible to confirm safety before starting work. Safe production is the primary premise in the production process, and unsafe non-production is effectively achieved.

Security managers need regular training and learning to keep up with the pace of social and corporate development. Safety management personnel should continuously improve their own quality, enhance their professional ability, innovate their working methods, regularly hold safety knowledge training courses for safety management personnel (including team leaders) and strictly assess them, and regularly organize centralized training and visits for safety management personnel, so that safety management personnel can be familiar with the laws, regulations, standards, norms, safety management system and safety regulations related to safety production, and master safety professional knowledge comprehensively, understand and learn the advanced management experience of peer companies to enhance the sense of responsibility of safety management personnel, improve the business and technical level of safety management personnel, on-site safety management level, and on-site safety risk management and control capabilities. According to the investigation and analysis, the accidents caused by the weak safety awareness and lack of safety knowledge of employees account for a large proportion.

Safety in production is the premise of all work. Safety in production and education should go first. Safety education is a long-term and continuous process. Only when there is a long-term awareness of safety production in the heart, will the string of safety production be tightened during the construction and production process. Only when safe production is done well can the big family of peak develop continuously in stability. (Cable Company Lu Chaofang)

More information

The Party committee of the company organized and studied the spirit of the Sixth Plenary Session of the 18th CPC Central Committee

The Sixth Plenary Session of the 18th Central Committee of the Communist Party of China was held in Beijing from October 24 to 27. It reviewed and approved the "Several Guidelines on Political Life within the Party under the New Situation" and the "Regulations on Inner-Party Supervision of the Communist Party of China. On November 22, the party committee of the group company successively held party committee and branch secretary meetings to learn the spirit of the sixth Plenary session of the 18th CPC Central Committee and put forward requirements for organizational construction and party member management. At the branch secretary meeting, Jiang Xiaomeng, secretary of the party committee of the group company, preached the main contents of "some guidelines on Inner-Party political Life under the New situation" and "regulations on Inner-Party Supervision of the Communist Party of China. He pointed out that seeking truth from facts, integrating theory with practice, keeping close ties with the masses, criticizing and self-criticism, democratic centralism, and strict party discipline are the basic norms and working principles of inner-party political life accumulated by the Communist Party of China for several generations. In the new social environment, some party members and cadres have bred some unhealthy atmosphere, which has damaged the image and interests of the party, the Sixth Plenary Session of the 18th Central Committee of the Communist Party of China proposed to strengthen and standardize the political life within the party, take the party constitution as the foundation, adhere to the party's political line, ideological line, organizational line and mass line, strive to enhance the political, contemporary, principled and fighting nature of the party's political life, and strive to enhance the party's ability of self purification, self improvement, self innovation and self improvement, Efforts should be made to improve the party's leadership and governance level, efforts should be made to safeguard the authority of the Party Central Committee, ensure the unity and unity of the party, maintain the advanced nature and purity of the party, and strive to form a centralized, democratic and disciplined party in the whole party

2020

07-31

Jinxi plant environmental protection facilities through the completion of acceptance

On November 1, Jianfeng Pharmaceutical Jinxi Pharmaceutical Factory successfully obtained the approval from Zhejiang Environmental Protection Department that the environmental protection facilities of the project passed the completion acceptance, and a key work of Jianfeng Pharmaceutical in 2016 came to an end. Jianfeng Pharmaceutical's annual output of 35 tons of cephalosporins, anti-tumor drugs and other raw material production lines and various preparation production lines technological transformation projects started construction in Jinxi Development Zone in October 2012 and were almost completed in September 2015. The construction of the project strictly abided by the "three simultaneous" system of environmental protection, conscientiously implemented the requirements in the environmental impact assessment report and its approval documents, and invested 19.34 million yuan in environmental protection facilities. The plant has basically realized the separation of clean and sewage. A new wastewater treatment system with a daily treatment capacity of 700 cubic meters and a "physical, chemical and biochemical" treatment process has been built, and an online monitoring device networked with the environmental protection department has been installed. All kinds of production wastewater, public works wastewater and domestic sewage are treated by the wastewater station and sent to Jinxi Sewage Treatment Plant for centralized treatment; there is an RTO regenerative incineration device of 10000 cubic meters per hour and a centralized treatment device of 4000 cubic meters per hour for chlorine-containing organic waste gas. All kinds of waste gas are discharged after collection and treatment. In October 2015, with the approval of Jinhua Economic and Technological Development Zone Branch of Jinhua Environmental Protection Bureau, the trial production of Jinxi project was carried out. After more than half a year of operation, in early July 2016, Zhejiang Environmental Monitoring Center Station carried out completion acceptance monitoring of environmental protection treatment facilities such as waste water and waste gas of Jinxi Pharmaceutical Factory, and issued a completion acceptance monitoring report of environmental protection facilities at the end of August.

2020

07-31

Jinxi plant environmental protection facilities through the completion of acceptance

2020

07-31

Jinxi plant environmental protection facilities through the completion of acceptance

2020

07-30

Daye Jianfeng Safety Standard was awarded as the only award-winning enterprise in daye city in 2015.

Due to the achievements made in the establishment of secondary safety production standardization, daye peak cement company recently received a special award of 200000 yuan from daye municipal government. In order to encourage industrial and commercial enterprises in the region to improve their production safety, daye municipal government set up a special fund in 2015, stipulating that 200000 yuan will be awarded to those who pass the secondary safety standardization review before December 31, 2015. It is understood that among the industrial and commercial enterprises in daye city, there were 4 enterprises that applied for and passed the examination in 2015, but only daye peak passed the examination before December. Therefore, Daye Peak has become the only enterprise that has won the special award for the establishment of the safety standard in Daye City in 2015. (Ye Meifang)

2020

07-31

Two Cement Enterprises Start to Implement "Big Patrol Inspection"

With the change of the competition situation in the industry, the profit space of cement production enterprises has been greatly squeezed. Reducing costs and increasing efficiency and job optimization have become the inevitable choice to improve the enterprise's own development ability and enhance the core competitiveness. In accordance with the requirements of the group company to realize the transformation from extensive management to lean management, combined with the advanced experience of peer enterprises, recently, Yunnan peak, daye peak two enterprises have implemented "big inspection" to promote the overall optimization of posts. On November 1, daye peak post inspection officially started full operation, starting from the limestone storage yard at the source of the production line to the cement storage. the original 15 posts were merged, and the best experienced mechanics, electricians and post workers were transferred to form a large inspection class, which was mainly responsible for on-site emergency disposal and post routine maintenance to ensure the normal production of the whole production line. In order to ensure the smooth implementation of the large-scale inspection, daye peak management team has repeatedly communicated and discussed with the heads of relevant workshops and departments, and held a special workshop post optimization promotion meeting in September to clarify objectives and responsibilities, formulate implementation steps, and do a lot of preparatory work. At the kick-off meeting for the implementation of the large-scale inspection on October 31, Zhang Fengliang asked daye peak employees to recognize the current situation of serious cement overcapacity and cruel market competition, understand the necessity of implementing the large-scale inspection, and asked the workshop leaders to do a good job in training and guiding the employees, shorten the transition period, normalize the operation of the large-scale inspection as soon as possible, and at the same time, managers should also change their working ideas and concepts and do a good job in full-time, strengthen the inspection, overhaul and maintenance of the regular day shift, and find and solve the problems existing in the equipment and process in time.

2020

07-30

< 1...53 54 55...61 > 跳转到页