News Center

Home page

Peak Report

News reports

We go to the audit

Release time:

2020-07-22

We went to audit

# May 17 -19 . As a member of the supplier audit team, I visited Changzhou Ruiming, Wuxi Yangjian Huaqiang, Suzhou Haishun, Zhejiang Duoling Pharmaceutical Packaging and other companies with my colleagues and conducted a series of audit work.

As one of the key elements of production, the quality and stability of raw materials and auxiliary materials directly determine the stability of the final product quality. In order to ensure the stability of product quality, our manufacturers conduct supplier audits of raw and auxiliary package suppliers every year. This is an on-site audit, including verifying the authenticity of the supplier's qualification documents and inspection reports, whether they have inspection conditions, etc., as well as reviewing its personnel structure, plant facilities and equipment, material management, production process and production management, and quality control laboratory equipment, instruments, document management, etc.

This is my first time to participate in the audit, although I made a corresponding inspection plan for the basic situation of all the suppliers to be inspected before departure. However, once you arrive at the scene, you will still be nervous and do not know where to start. With the warm reception of the representatives of the supply side, our audit work was carried out in an orderly manner.

First of all, we went to the manufacturers of raw materials and chemical raw materials. Before entering the production area, the reception staff of the other party gave us full oral safety education and issued safety helmets, demonstrating the safety awareness that a chemical plant should have. Their production area and office area have obvious regional isolation, effectively avoid cross-contamination. However, some parts of the production site are not doing very well. For example, the unloading position of the raw materials delivered from the warehouse is too random, which is just the place where solar energy is exposed. The label of the raw materials during feeding was removed in advance. In contrast, our factory has done a better job of on-site management. When the raw materials come, there will also be a special unloading position. The labels of the materials will be on the materials until the end of feeding, so as to avoid confusion. We raised these issues with the manufacturer, and the other party accepted them modestly, dealt with them in a timely manner, and said that they would provide rectification reports after all rectifications.

may be an old customer. The manufacturers of composite film (bag) and aluminum foil for drug packaging are a little too casual in reception. We arrived at the factory on the same day but could not find the reception staff. On the spot, there is a sharp contrast between the packaging material manufacturers and our pharmaceutical companies. Although they are also in the D area, their spot is slightly messy and their concept of clearing the spot is somewhat vague. Due to continuous production, the equipment site is easy to leave materials, and the lack of fixed position is slightly messy. They also made rectification immediately after the site was put forward. For our pharmaceutical factory, it is also necessary to change what we have and encourage what we have not.

The third enterprise we went to is a large listed company. Not only can the production and inspection equipment meet the production and inspection requirements, but also the production line is fully automatic production of industry 4.0 , which is fully automated from equipment operation, material and product transportation. In the workshop, the quality of products is also monitored in real time through the central control room, and the positioning of various items is also standardized. The warehouse is a 4 -storey three-dimensional library, which realizes unmanned operation. Their laboratory even has a separate aluminum plastic machine to do challenging experiments, reflecting their pursuit of product quality excellence. All these are worth learning. The wave of industrial automation upgrading is constantly advancing. Although we have not yet entered that stage, we must always maintain our own improvement to meet this wave.

The last company is an enterprise that produces PVC medicinal hard tablets and various composite hard tablets and composite high-barrier packaging materials. Our host is their QC supervisor. To my surprise, their supervisor QC was born in a health school and took part in the inspection work, but he was quite familiar with their process flow and process parameters. This also makes us realize that no matter what position we are in, we should actively learn what we can come into contact with, especially for the process flow and process parameters in production, showing a kind of professionalism for our own industry. During the audit, we found that their workshop also has a special access to visit, each door has access control, for access control is very good. This is where we can learn from. For a workshop, access control is very important, which can effectively avoid problems such as personnel stringing and pollution.

As a production enterprise, our pharmaceutical factory also accepts the audit of our customers every year. Through this rare audit opportunity, I can look at the supplier from the customer's point of view, from which I can objectively see many problems in daily work and production. The first point is that for the reception of customers, special personnel and sufficient relevant information can make customers have a good impression on us; on the production site, various small details determine the quality of the product and whether the production process meets the customer's standards; records and various inspection reports show the true quality of the product. Taking the essence and removing the dross, we will apply the experience gained during this audit to our daily production work, which will certainly give a great impetus to our future work. (Zheng Nan)

More information

City Red Cross thanks spike help "anti-epidemic"

On February 26, Jinhua City Red Cross Party Secretary, Executive Vice President Shi Yiwei and his entourage to visit the peak, the peak in the prevention and control of the new coronary pneumonia epidemic actively contribute to love, brave social responsibility of the great love and kindness to express gratitude. Jiang Xiaomeng, chairman of the group company, Huang Jinlong, deputy general manager of the group company and general manager of the pharmaceutical company, and Xiang Chongping, deputy general manager of the group company, had a discussion with Vice President Shi Yiwei and his party. In order to solve the difficult problems for caring enterprises to resume work and production, the Municipal Red Cross Society, based on its own functional positioning and giving full play to its unique advantages, conducted a large feedback and return visit to caring enterprises, and jointly established three Red Cross volunteer service teams, including traditional Chinese medicine service, psychological assistance, and emergency rescue training, to take "eight measures" to help caring enterprises resume work and production. Vice President Shi Yiwei led the backbone of three volunteer service teams to the peak for a return visit, expressing his gratitude for the contribution made by the peak in the prevention and control of the new coronary pneumonia epidemic, and sent a letter of thanks and the "New Coronary Pneumonia Prevention and Control Enterprises Resuming Work and Resuming Production Protection Manual". Chairman Jiang Xiaomeng introduced the industrial layout, production and operation of the peak, focusing on the resumption of work and production of the peak enterprises, and put forward opinions and suggestions on the reduction and exemption of basic electricity charges for enterprises, the support policies for small and medium-sized enterprises, and the payment of "five insurance and one fund. (Reporter Ni Yingzhen)

2020

07-15

Peak 2013 corporate bonds complete principal and interest payments

News from our newspaper On November 20, Zhejiang Jianfeng Group Co., Ltd. successfully completed the payment of principal and interest on 2013 corporate bonds (Phase II) (hereinafter referred to as "13 Jianfeng 02"). At this point, all the corporate bonds approved for issuance in 2013 have been paid. In 2013, with the approval of document No. [2013]595 of China Securities Regulatory Commission, the company was allowed to issue corporate bonds with a face value of no more than 0.6 billion yuan to the public, with a debt rating of AA +. On June 5, 2013, the Company issued the 2013 Corporate Bonds (Phase I) ("13 Peak 01"), which raised $0.3 billion at a coupon rate of 4.90 per cent, 1.55 percentage points lower than the then five-year benchmark interest rate for bank loans. On November 20, 2014, "13 Peak 02" was successfully issued, raising 0.3 billion yuan again at a coupon rate of 5.09, and was listed on the Shanghai Stock Exchange on December 11, 2014. The ability to raise 0.6 billion yuan from the capital market at a lower cost reflects investors' recognition of the company's "cement + pharmaceutical" dual business structure and expectations of the company's good operating performance. On June 5, 2018, the first issue of Jianfeng Group's 2013 corporate bonds was due to complete the payment of principal and interest, and now the second issue of corporate bonds has also successfully completed the payment of principal and interest. In the real economic growth is weak, business operations continue to explode, the company in a short period of time successfully completed two issues of a total of 0.6 billion yuan of corporate bonds principal and interest payment work, fully reflecting the company's good operating results in recent years.

2020

07-31

Company Leaders Attend Jinhua Development Conference

News from our newspaper On November 17, the second 2019 Jinhua Development Conference with the theme of "Insist on high-quality integration into the Yangtze River Delta to build a metropolitan area" opened in Jinhua, Zhejiang. More than a thousand people from the scientific and educational circles, business circles, and overseas Chinese from home and abroad Business people, representatives of "New Golden Chinese" and representatives of outstanding Jinhua students attended the meeting. Group leaders Jiang Xiaomeng, Yu Jianhong and Huang Jinlong attended the relevant activities of the conference. As a representative of the Jinhua business community, Jiang Xiaomeng, chairman of the group company, made a keynote speech at the "Scientist" and "Entrepreneur" Innovation Dialogue of the Development Conference, expressing his views on how Jinhua enterprises can improve their technological competitiveness. As the head of Jinhua local enterprise with a history of more than 60 years, Jiang Xiaomeng has a profound experience in promoting the development of enterprises through science and technology. Combined with the reality of peak scientific and technological innovation, he pointed out in his speech that the improvement of scientific and technological innovation ability is an urgent event for Jinhua small and medium-sized enterprises. Private enterprises cannot achieve high-quality development without the support of scientific and technological forces; with the progress of society, the improvement of people's living standards and the continuous improvement of cultural quality, the demand for products and the pursuit of product quality have also undergone qualitative changes. Only products with scientific and technological connotations can attract consumers. He suggested that the government and relevant institutions should establish an information platform to further understand the scientific and technological support that enterprises need in the transformation, understand what kind of help scientific and technological personnel can provide to enterprises, do a good job in the information docking of scientists and entrepreneurs, further attract investment and wisdom, give full play to the scientific and technological achievements of academicians and experts and the capital advantages of businessmen at home and abroad, and promote Jinhua enterprises to better integrate into Changsan

2020

07-31

Company Leaders Attend Jinhua Development Conference

2020

07-22

The Party Committee of the Group conducts thematic education and concentrated study.

On November 12, the Party Committee of the Group Company held a "Do not forget your initiative mind, Keeping in mind the mission" thematic education and study meeting to focus on the relevant spirit of the central and higher Party committees on thematic education and the key points in the "Decision of the Central Committee of the Communist Party of China on Adhering to and Improving the Socialist System with Chinese Characteristics, Promoting the Modernization of the National Governance System and Governance Capacity" previously held at the Fourth Plenary Session of the 19th CPC Central Committee of the 19th CPC Central Committee, and make arrangements for further promoting thematic education in the whole group. According to the central government's schedule for the second batch of thematic education, the group party committee requires all party members and cadres to deeply understand the significance of carrying out the thematic education of "not forgetting the original heart and keeping in mind the mission", and firmly grasp the "keep the original heart, undertake the mission, find the gap, and grasp the implementation" The general requirements of the group party committee members will also go to various enterprises separately in the near future, carry out research on the development of theme education, the current difficulties faced by enterprises and the issues of concern to employees, so as to achieve the effect of closely combining theme education with the promotion of enterprise management, and strengthening the close combination of party building and enterprise development. (this newspaper reporter)

2020

07-31

Company Leaders Attend Jinhua Development Conference

2020

07-31

< 1...26 27 28...61 > 跳转到页