We go to the audit
Release time:
2020-07-22
We went to audit
# May 17 -19 . As a member of the supplier audit team, I visited Changzhou Ruiming, Wuxi Yangjian Huaqiang, Suzhou Haishun, Zhejiang Duoling Pharmaceutical Packaging and other companies with my colleagues and conducted a series of audit work.
As one of the key elements of production, the quality and stability of raw materials and auxiliary materials directly determine the stability of the final product quality. In order to ensure the stability of product quality, our manufacturers conduct supplier audits of raw and auxiliary package suppliers every year. This is an on-site audit, including verifying the authenticity of the supplier's qualification documents and inspection reports, whether they have inspection conditions, etc., as well as reviewing its personnel structure, plant facilities and equipment, material management, production process and production management, and quality control laboratory equipment, instruments, document management, etc.
This is my first time to participate in the audit, although I made a corresponding inspection plan for the basic situation of all the suppliers to be inspected before departure. However, once you arrive at the scene, you will still be nervous and do not know where to start. With the warm reception of the representatives of the supply side, our audit work was carried out in an orderly manner.
First of all, we went to the manufacturers of raw materials and chemical raw materials. Before entering the production area, the reception staff of the other party gave us full oral safety education and issued safety helmets, demonstrating the safety awareness that a chemical plant should have. Their production area and office area have obvious regional isolation, effectively avoid cross-contamination. However, some parts of the production site are not doing very well. For example, the unloading position of the raw materials delivered from the warehouse is too random, which is just the place where solar energy is exposed. The label of the raw materials during feeding was removed in advance. In contrast, our factory has done a better job of on-site management. When the raw materials come, there will also be a special unloading position. The labels of the materials will be on the materials until the end of feeding, so as to avoid confusion. We raised these issues with the manufacturer, and the other party accepted them modestly, dealt with them in a timely manner, and said that they would provide rectification reports after all rectifications.
may be an old customer. The manufacturers of composite film (bag) and aluminum foil for drug packaging are a little too casual in reception. We arrived at the factory on the same day but could not find the reception staff. On the spot, there is a sharp contrast between the packaging material manufacturers and our pharmaceutical companies. Although they are also in the D area, their spot is slightly messy and their concept of clearing the spot is somewhat vague. Due to continuous production, the equipment site is easy to leave materials, and the lack of fixed position is slightly messy. They also made rectification immediately after the site was put forward. For our pharmaceutical factory, it is also necessary to change what we have and encourage what we have not.
The third enterprise we went to is a large listed company. Not only can the production and inspection equipment meet the production and inspection requirements, but also the production line is fully automatic production of industry 4.0 , which is fully automated from equipment operation, material and product transportation. In the workshop, the quality of products is also monitored in real time through the central control room, and the positioning of various items is also standardized. The warehouse is a 4 -storey three-dimensional library, which realizes unmanned operation. Their laboratory even has a separate aluminum plastic machine to do challenging experiments, reflecting their pursuit of product quality excellence. All these are worth learning. The wave of industrial automation upgrading is constantly advancing. Although we have not yet entered that stage, we must always maintain our own improvement to meet this wave.
The last company is an enterprise that produces PVC medicinal hard tablets and various composite hard tablets and composite high-barrier packaging materials. Our host is their QC supervisor. To my surprise, their supervisor QC was born in a health school and took part in the inspection work, but he was quite familiar with their process flow and process parameters. This also makes us realize that no matter what position we are in, we should actively learn what we can come into contact with, especially for the process flow and process parameters in production, showing a kind of professionalism for our own industry. During the audit, we found that their workshop also has a special access to visit, each door has access control, for access control is very good. This is where we can learn from. For a workshop, access control is very important, which can effectively avoid problems such as personnel stringing and pollution.
As a production enterprise, our pharmaceutical factory also accepts the audit of our customers every year. Through this rare audit opportunity, I can look at the supplier from the customer's point of view, from which I can objectively see many problems in daily work and production. The first point is that for the reception of customers, special personnel and sufficient relevant information can make customers have a good impression on us; on the production site, various small details determine the quality of the product and whether the production process meets the customer's standards; records and various inspection reports show the true quality of the product. Taking the essence and removing the dross, we will apply the experience gained during this audit to our daily production work, which will certainly give a great impetus to our future work. (Zheng Nan)
More information
Since the implementation of the large-scale inspection in early November 2016, Daye Jianfeng Cement Company has embarked on a comprehensive institutional adjustment and optimization, which has been carried out for more than five months. In just a few months, the internal management of Daye Peak has achieved a preliminary transformation, the process has been further straightened out, and the work efficiency has also been significantly improved. Reduce the hierarchy and further flatten the management. In the past, in order to avoid responsibilities, there were often repeated and overlapping settings in the setting of enterprise posts, and even there were cases where no one handled the accident and no one took responsibility. In order to truly realize flat management, daye peak merged the original production department, technology department, manufacturing workshop and finished product workshop to form a manufacturing department in early January this year after the implementation of large-scale inspection. Merging the former Environmental Security Department and the Comprehensive Management and Security Department to form the Environmental Security Department; The purchasing functions of the original departments were merged into the purchasing department. The functions of the infrastructure section of the former comprehensive management department were merged into the waste heat power generation department. After the adjustment of the organization, the members of the management team in charge of production also served as department managers, realizing the "sinking" of management ". Adjust and formulate the responsibility system to ensure that tasks are on duty and responsibilities are on duty. In response to changes in institutions and job settings, Daye Peak has carried out a comprehensive revision of the job responsibility system, making requirements around the key indicators of various departments and positions, and implementing "personalization" of responsibilities ". For example, the relevant indicators of mechanics focus on the consumption of machinery and materials, the operation rate of the equipment under their jurisdiction, and the failure time, and the hook for cement and clinker production has been canceled. Responsibility assessment is carried out according to post responsibilities and relevant management systems, and the assessment has been strengthened. In order to understand the actual effect of daye peak institutional reform, on March 30, the group company
2020
07-31
Group Party Committee to determine the annual work plan
The party Committee of the group company has determined its work ideas and work plan for 2017 a few days ago, and relevant work has been arranged below. In view of the current new political and economic situation and the task of enterprise transformation and development, the general requirements of the Party Committee of the Group Company for 2017 are: to thoroughly study and implement the spirit of the Sixth Plenary Session of the 18th CPC Central Committee and the series of important speeches by General Secretary Xi Jinping, the spirit of the Seventh Party Congress of Jinhua City, to closely revolve around the center of enterprise production, operation and reform and development, and to adhere to scientific development and cross-regional development as the first priority, in order to continue to carry out the study and education of "five stars striving for innovation" and "two learning and one doing", we should highlight the main line of comprehensively and strictly administering the party according to the rules, firmly establish the political awareness, overall situation awareness, core awareness and alignment consciousness of the majority of Party members and cadres, strengthen and improve the party building work in enterprises in the spirit of reform, and strive to improve the scientific, standardized and institutionalized level of Party building work in enterprises, in order to promote the scientific development of the group company, leapfrog development and harmonious development, it provides a strong political, ideological and organizational guarantee. The working idea of the Party Committee of the Group Company in 2017 is to focus on "one center", adhere to "one concept", highlight "three key points" and do a good job in "three constructions". That is: centering on the "one center" of enterprise production, operation and reform and development, we should strive to strengthen the "one concept" of "the organic unity of the party's leadership and the improvement of corporate governance"; to "thoroughly implement the main responsibility of the party committee; continue to carry out the study and education of" two learning and one doing "; and improve the system of party building work" as the "three key points", and focus on "team building and team building
2020
07-30
End of 2016 Qualification Review
According to our newspaper, the 2016 employee qualification evaluation work ended a few days ago, and 380 employees obtained new qualifications. Since the implementation of the employee qualification evaluation system in 2010, it has produced certain results in promoting employees to strengthen self-learning and improve and establish a multi-channel career development system for employees. Since the company's cement sector was included in the scope of qualification management for the first time, in accordance with the relevant regulations of the company's employee qualification management, the written examination for this review was conducted in Jinhua, Daye, and Pu'er on December 25, 2016. After professional knowledge examination, performance evaluation and comprehensive evaluation, the qualification of the corresponding grade and grade is finally determined. A total of 380 employees participated in the review, including 40 in management, 59 in technology and 281 in technicians. According to the unit, there are 2 people in the group department, 186 in daye peak, 89 in Yunnan peak, 56 in pharmaceutical company, 6 in international trade company and 41 in peak health. For employees who apply for qualifications above level 3, Group Barton organized a unified review. According to the final results, more than 6 per cent of the total number of persons rated as three or more qualified. (this newspaper reporter)
2020
07-31
Group Party Committee to determine the annual work plan
The party Committee of the group company has determined its work ideas and work plan for 2017 a few days ago, and relevant work has been arranged below. In view of the current new political and economic situation and the task of enterprise transformation and development, the general requirements of the Party Committee of the Group Company for 2017 are: to thoroughly study and implement the spirit of the Sixth Plenary Session of the 18th CPC Central Committee and the series of important speeches by General Secretary Xi Jinping, the spirit of the Seventh Party Congress of Jinhua City, to closely revolve around the center of enterprise production, operation and reform and development, and to adhere to scientific development and cross-regional development as the first priority, in order to continue to carry out the study and education of "five stars striving for innovation" and "two learning and one doing", we should highlight the main line of comprehensively and strictly administering the party according to the rules, firmly establish the political awareness, overall situation awareness, core awareness and alignment consciousness of the majority of Party members and cadres, strengthen and improve the party building work in enterprises in the spirit of reform, and strive to improve the scientific, standardized and institutionalized level of Party building work in enterprises, in order to promote the scientific development of the group company, leapfrog development and harmonious development, it provides a strong political, ideological and organizational guarantee. The working idea of the Party Committee of the Group Company in 2017 is to focus on "one center", adhere to "one concept", highlight "three key points" and do a good job in "three constructions". That is: centering on the "one center" of enterprise production, operation and reform and development, we should strive to strengthen the "one concept" of "the organic unity of the party's leadership and the improvement of corporate governance"; to "thoroughly implement the main responsibility of the party committee; continue to carry out the study and education of" two learning and one doing "; and improve the system of party building work" as the "three key points", and focus on "team building and team building
2020
07-31
Yunnan peak through the safety standard secondary acceptance
On March 21, Yunnan Jianfeng Cement Company successfully passed the evaluation and acceptance of secondary enterprises for safety production standardization. On the same day, a review team composed of leaders of the Yunnan Provincial Work Safety Supervision Bureau and relevant experts reviewed the implementation of the establishment of Yunnan Jianfeng safety production standardization secondary enterprises. According to the 13 elements involved in the "Standard for Assessment and Rating of Safety Production Standardization in Cement Enterprises", the review team conducted strict assessment and scoring item by item through grouping to check the site and review the data, and finally determined that Yunnan Peak passed the standard acceptance of safety standardization secondary enterprises. Yunnan Jianfeng has always attached great importance to safety production. After passing the three-level safety standard enterprise review in 2015, in order to raise the level of enterprise safety management to a new level, in 2016, it began to create secondary safety standardization. Over the past year, Yunnan Jianfeng has insisted on taking the creation of secondary safety standards as the top priority of production and operation management, and has formulated an implementation plan for production safety standardization in accordance with the requirements of national standardization norms. the content covers production safety responsibility system, education and training, safety inspection, safety facilities management and other safety production management standards, systems and post safety operation procedures, while further strengthening daily safety inspection and regularly organizing emergency plan drills, strengthen the investigation and rectification of potential safety hazards and the supervision of important hazard sources, and further consolidate the foundation of enterprise safety production management. After the review, Zhou Jiping, general manager of Yunnan Jianfeng, said that Yunnan Jianfeng will take this standard as a new starting point. On the basis of consolidating the accident-free achievements in production safety for two consecutive years, it will conscientiously implement the main responsibility of production safety and cultivate
2020
07-31
Yunnan peak through the safety standard secondary acceptance
On March 21, Yunnan Jianfeng Cement Company successfully passed the evaluation and acceptance of secondary enterprises for safety production standardization. On the same day, a review team composed of leaders of the Yunnan Provincial Work Safety Supervision Bureau and relevant experts reviewed the implementation of the establishment of Yunnan Jianfeng safety production standardization secondary enterprises. According to the 13 elements involved in the "Standard for Assessment and Rating of Safety Production Standardization in Cement Enterprises", the review team conducted strict assessment and scoring item by item through grouping to check the site and review the data, and finally determined that Yunnan Peak passed the standard acceptance of safety standardization secondary enterprises. Yunnan Jianfeng has always attached great importance to safety production. After passing the three-level safety standard enterprise review in 2015, in order to raise the level of enterprise safety management to a new level, in 2016, it began to create secondary safety standardization. Over the past year, Yunnan Jianfeng has insisted on taking the creation of secondary safety standards as the top priority of production and operation management, and has formulated an implementation plan for production safety standardization in accordance with the requirements of national standardization norms. the content covers production safety responsibility system, education and training, safety inspection, safety facilities management and other safety production management standards, systems and post safety operation procedures, while further strengthening daily safety inspection and regularly organizing emergency plan drills, strengthen the investigation and rectification of potential safety hazards and the supervision of important hazard sources, and further consolidate the foundation of enterprise safety production management. After the review, Zhou Jiping, general manager of Yunnan Jianfeng, said that Yunnan Jianfeng will take this standard as a new starting point. On the basis of consolidating the accident-free achievements in production safety for two consecutive years, it will conscientiously implement the main responsibility of production safety and cultivate
2020
07-31
Contact Us
No. 88 Wujiang East Road, Jinhua City, Zhejiang Province, China
Tel: +86-579-82326868
Fax : +86-579-82324666
©2023 Zhejiang Jianfeng Group Co., Ltd. Powered by: www.300.cn SEO Business License
SAF Coolest v1.2 设置面板 SHJSS-AHDB-FSSQE-ZSW
无数据提示
Sorry, the current column has no content !
You can view other columns or return to Home Page