Discussion on Safety Management Defects
Release time:
2020-07-22
Safety Management Defects Discussion
Accidents are caused by unsafe behaviors of people, unsafe conditions of things and management defects. Although the management defects in the three major factors are ranked at the end, in the long run, safety management has a decisive impact on the two major accident causes of unsafe behavior of people and unsafe state of things at the same time. Therefore, the inspection and evaluation of the safety management status is the focus of the company's safety supervision of various enterprises in the next stage. Summarizing the previous safety management situation, the management defects are more or less manifested in the following ten aspects:
1. Safety management organization defects. Mainly in the safety management organization, personnel composition does not adapt to the production system; not according to the requirements of the safety quality of the appropriate, sufficient management personnel, resulting in the safety management of the existence of improper convergence, management gaps, etc.; personnel cross authority, resulting in management confusion.
2. Safety rules and regulations are flawed. It is mainly manifested in the failure to formulate and improve the safety production responsibility system and safety production management system according to its own characteristics, resulting in no rules to follow in the work and chaotic production sequence; the safety production responsibility system is not implemented in every link, every post and every person, and their respective responsibilities are not clear; there is a lack of mutual cooperation and promotion mechanism between different safety rules and management systems; the safety rules and management system is mere formality, with imperfect and incomplete content; the requirements of safety rules and regulations are out of touch with the actual work, etc.
3. Insufficient safety quality of employees. Insufficient safety education and training for employees, safety management personnel and grassroots operators have not received training or insufficient training hours, and do not have the corresponding safety production knowledge and job ability; The quality of employees is low, the knowledge is outdated, and the concept is backward, resulting in poor safety awareness and a large number of unsafe behaviors; The safety education and training of foreign employees are ignored.
4. loose management of hazardous chemicals, hazardous processes and major hazard sources, inadequate monitoring measures, insufficient risk identification, unclear control methods, insufficient prevention and emergency treatment, and backward predictive management methods.
5. The supervision, inspection and assessment of management personnel are insufficient, there are prohibitions, orders, illegal behaviors, and special operation safety management is not in place.
6. Hidden dangers are not thoroughly investigated and control measures are not appropriate.
7. New construction, renovation projects or new equipment of enterprises fail to carry out "three simultaneous" safety facilities as required, resulting in congenital deficiency of safety production conditions.
8. Insufficient investment in safety funds, insufficient safety education and training, inadequate personal protection, insufficient safety facilities, and failure to provide funds for the investigation and management of hidden dangers of accidents have led to accidents.
9. Failure to establish safety production record files is not conducive to timely, comprehensive and systematic grasp of the safety production situation of enterprises and timely reflection of safety production trends; It is not conducive to analyzing the risk factors in safety production and making safety management decisions. The safety management system has not formed a virtuous circle mode of "PDCA .
10. Improper management of accidents (including attempts) has worsened the accidents, such as late reporting, omission, false reporting or concealment of the accidents, failure to find out the cause of the accidents, failure to educate the masses, etc., thus causing minor accidents (signs) to become major accidents. (Safety Management Office of CNPC)
More information
Tianjin Flemish Company Donates Anti-epidemic Materials
On the morning of July 13, Tianjin Jianfeng Flanders Pharmaceutical Technology Development Co., Ltd. donated materials to the Tianjin Development Zone Charity Association to help the development zone community fight the epidemic.
2020
08-05
In late July, leaders of the group company Jiang Xiaomeng, Yu Jianhong, Chen Tianci and Qin Xuping visited subordinate enterprises separately and sent heatstroke prevention and cooling supplies to employees working under high temperature, urging everyone to pay attention to heatstroke prevention and cooling and safe production work to ensure good physical condition.
2020
08-05
On July 17 and 18, the Group's work analysis meeting for the first half of 2020 was held at the Peak Building of the Group's headquarters to summarize and review the work in the first half of the year and make arrangements for the work in the second half of the year.
2020
08-05
The company requires to do a good job in summer safety production
The high temperature season is approaching, and the group company issued a notice a few days ago to make arrangements for safe production in summer.
2020
08-05
The company requires to do a good job in summer safety production
The high temperature season is approaching, and the group company issued a notice a few days ago to make arrangements for safe production in summer. The notice requires all subordinate units of the company to attach great importance to the work of production safety in summer, and all production and business units should hold a special meeting on production safety in summer. According to the characteristics of production in summer, they should focus on safety risk analysis for mines, outdoor operations and high-temperature posts, and implement control measures to avoid the occurrence of safety accidents such as scalding, heatstroke and electric shock. In order to further strengthen the safety production management in the high temperature season, the notice requires the main person in charge of each production and business unit to lead a team to conduct a comprehensive inspection of the production and business premises according to the characteristics of summer production; strengthen the daily safety production inspection of key posts and special posts; timely rectify the found unsafe behaviors and hidden dangers; Strengthen the management of the storage and use of flammable, explosive, dangerous chemicals and drugs; cooling measures shall be taken for the space exceeding the storage temperature limit of articles. If it is found that the electrical equipment circuit and exhaust fan circuit are aged and damaged, replace them in time and keep the grounding wire in good condition. Do a good job in checking the fire pool, pipeline water pressure and fire extinguishing equipment to ensure that the fire fighting facilities are sensitive, intact and reliable. The high temperature in summer is also a period of frequent occurrence of heatstroke and other diseases. The notice requires all units to do a good job in heatstroke prevention and cooling, implement various relevant measures, and equip necessary cooling facilities or materials such as fans, air conditioners, ice cubes and other cooling facilities or materials according to the conditions of the production site; do a good job in the distribution of heatstroke prevention drugs, supplies and cool drinks in workshops, warehouses, construction sites and other production lines; strengthen canteen management to prevent food poisoning. (this newspaper reporter)
2020
07-22
The company requires to do a good job in summer safety production
The high temperature season is approaching, and the group company issued a notice a few days ago to make arrangements for safe production in summer. The notice requires all subordinate units of the company to attach great importance to the work of production safety in summer, and all production and business units should hold a special meeting on production safety in summer. According to the characteristics of production in summer, they should focus on safety risk analysis for mines, outdoor operations and high-temperature posts, and implement control measures to avoid the occurrence of safety accidents such as scalding, heatstroke and electric shock. In order to further strengthen the safety production management in the high temperature season, the notice requires the main person in charge of each production and business unit to lead a team to conduct a comprehensive inspection of the production and business premises according to the characteristics of summer production; strengthen the daily safety production inspection of key posts and special posts; timely rectify the found unsafe behaviors and hidden dangers; Strengthen the management of the storage and use of flammable, explosive, dangerous chemicals and drugs; cooling measures shall be taken for the space exceeding the storage temperature limit of articles. If it is found that the electrical equipment circuit and exhaust fan circuit are aged and damaged, replace them in time and keep the grounding wire in good condition. Do a good job in checking the fire pool, pipeline water pressure and fire extinguishing equipment to ensure that the fire fighting facilities are sensitive, intact and reliable. The high temperature in summer is also a period of frequent occurrence of heatstroke and other diseases. The notice requires all units to do a good job in heatstroke prevention and cooling, implement various relevant measures, and equip necessary cooling facilities or materials such as fans, air conditioners, ice cubes and other cooling facilities or materials according to the conditions of the production site; do a good job in the distribution of heatstroke prevention drugs, supplies and cool drinks in workshops, warehouses, construction sites and other production lines; strengthen canteen management to prevent food poisoning. (this newspaper reporter)
2020
07-31
Contact Us
No. 88 Wujiang East Road, Jinhua City, Zhejiang Province, China
Tel: +86-579-82326868
Fax : +86-579-82324666
©2023 Zhejiang Jianfeng Group Co., Ltd. Powered by: www.300.cn SEO Business License
SAF Coolest v1.2 设置面板 SHJSS-AHDB-FSSQE-ZSW
无数据提示
Sorry, the current column has no content !
You can view other columns or return to Home Page