Intellectual property management is not simple
Release time:
2020-08-14
Intellectual Property Management is Not Simple
5# In May, I attended the third training course for enterprise internal auditors in Zhejiang Province and learned the foundation of enterprise standard management system, interpretation of intellectual property management standard text, compilation of management system documents, and implementation process of intellectual property standards.
, as a QA member of the pharmaceutical quality management department, at first I didn't think the correlation between intellectual property rights and quality management was very big, because for drug production, quality is the most important thing, GMP is what we should focus on learning, and we should take GMP as the criterion everywhere in our work to ensure good quality. But after this study, I have some preliminary ideas on how to integrate intellectual property into the quality department. For example, "confidentiality", although the quality management department is not as good as the core department of new drug research and development, once it enters the trial production stage, the quality management department will participate in it, and all kinds of relevant documents of drug production should be summarized to the quality management department, so confidentiality work is also very important for the quality management department. The QA department involves the most documents, including quality standards, supplier information, process procedures, post operation SOP , equipment list, floor plan, etc. The classified level of each type of document should be refined and stipulated in the document. In my opinion, in the process of establishing a new system, after formulating the principles and objectives, we should not only have an accurate understanding of the norms, but also proceed from reality and formulate them based on the actual situation of each department. Only in this way can we have operability. The intellectual property management system is not a completely independent management structure, it needs to be attached to the existing management system of the enterprise, make full use of the existing management system foundation, enhance the effectiveness and feasibility of the system operation, reduce the operation cost of the enterprise intellectual property management system, and improve the operation efficiency. After the establishment of
intellectual property management system, the next step is to implement it. In the process of implementation, we adopt the method of PDCA to ensure the continuous operation and continuous improvement of the intellectual property system. The cycle of PDCA is also called quality ring, which is the basic criterion in the quality management system. Our daily GMP management also follows this basic principle, in which P is planning, D is implemented or executed, C is checked, and A is effective. This is a dynamic management mode, which continuously discovers problems, raises problems, and then improves, make GMP management implement every link of production management. So the intellectual property management system can learn from the PDCA approach. The establishment of
intellectual property management system, the implementation of the process, the internal audit and external audit of the inspection and implementation results, corresponding to GMP management work is GMP self-inspection and GMP certification. Among them, the internal audit process is very similar to the GMP self-inspection process, and the production of various forms can be completely referenced. Our quality management department has a very detailed internal self-inspection management procedure of GMP on GMP self-inspection, which we can learn from in the intellectual property management system.
It is not an overnight thing to push forward the implementation of standards. It requires us to persevere and unswervingly to achieve results. It is the general trend for enterprises to implement standards. As an internal auditor, I have the responsibility to assist the company's intellectual property management department to establish an intellectual property management system, enhance the competitiveness of enterprises and create added value. (Lin Jianping)
More information
Jiang Xiaomeng Yunnan Jianfeng Lectures on Party Lessons
In order to implement the requirements of the higher-level party committee secretary to give in-depth party lectures in enterprises, on July 4, Jiang Xiaomeng, secretary of the party committee and chairman of the group company, gave a special lecture on "two studies and one doing" for party members at Yunnan Jianfeng Cement Company. In the lecture, Jiang Xiaomeng started from the background, overall requirements, learning and education content, and main measures of the "two studies and one doing" activities. He hoped that all party members and cadres would understand "awe, gratitude, humility, and decent", and put forward "What should the current enterprise do" and "How should the enterprise go in the future" and other issues. Jiang Xiaomeng analyzed the future development trend of cement and pharmaceutical industries in detail, emphasized the importance of seizing opportunities, and pointed out that with the homogenization of cement industry becoming more and more serious, if we want to take the road of differentiated brand development, the core of competition is to strengthen self management and maximize the cost, so as to improve the competitive advantage. As far as Yunnan Jianfeng is concerned, it is necessary to continuously improve the level of process technology management and increase the hourly output by increasing inspection efforts. Starting from strengthening the control of raw material procurement, the quality and price should be controlled. By strengthening sales management, vigorously develop direct agents, and strive to maximize the profit per ton; By strengthening equipment maintenance, reduce equipment accidents and further reduce the consumption of machine materials; Make good use of people, while constantly tapping talents and cultivating new people, we will gradually control the total number of workers and improve labor productivity. According to the current situation and the company's development strategy, what should the party members of the peak do? Jiang Xiaomeng asked all the party members and cadres of Yunnan peak to play a good vanguard and exemplary role and take the lead in learning new knowledge, new technology and new experience.
2020
07-30
Yunnan Peak Starts Secondary Security Standardization Creation
On June 19, Yunnan Jianfeng cement company held a mobilization meeting to further implement the requirements of the State Council, Yunnan Province, Pu'er City and Simao District Safety Supervision Bureau on carrying out safety production standardization work, and deploy the secondary safety standardization work. At the meeting, Liu Shenghua, deputy general manager of Yunnan Jianfeng, read out the requirements and work arrangements for creating a secondary enterprise for safety production standardization. The representative of Yunnan superstar Safety Technology Service Co., Ltd., the evaluation unit of safety production standardization, explained in detail the relevant knowledge of safety production standardization consultation and evaluation for the participants, and explained the requirements, standards and other elements of safety production standardization work. Zhou Jiping, general manager of Yunnan Jianfeng, mobilized the establishment of secondary safety production standardization at the meeting, requiring all workshops and departments to prepare and report the data before the end of October, and both software and hardware meet the acceptance conditions, so as to complete the bid creation work by the end of the year. Through the mobilization meeting, the responsible persons of Yunnan Jianfeng and superstar companies and relevant personnel had in-depth exchanges, further unified their thinking, and improved Yunnan Jianfeng employees' understanding of safety production standardization. Everyone recognizes that carrying out safety production standardization work is not only to implement the spirit of a series of documents of the party and the country, but also a mandatory requirement of the government for enterprises, and it is also the need for the sustainable and healthy development of enterprises themselves. Through the development of safety production standardization, enterprises can be promoted to establish and improve the safety production responsibility system, improve the safety production management system, standardize the production operation behavior, investigate and control the hidden dangers of accidents, effectively control the sources of danger, make the production equipment and facilities meet the safety standards, and continuously improve
2020
07-31
Yunnan Peak Starts Secondary Security Standardization Creation
On June 19, Yunnan Jianfeng cement company held a mobilization meeting to further implement the requirements of the State Council, Yunnan Province, Pu'er City and Simao District Safety Supervision Bureau on carrying out safety production standardization work, and deploy the secondary safety standardization work. At the meeting, Liu Shenghua, deputy general manager of Yunnan Jianfeng, read out the requirements and work arrangements for creating a secondary enterprise for safety production standardization. The representative of Yunnan superstar Safety Technology Service Co., Ltd., the evaluation unit of safety production standardization, explained in detail the relevant knowledge of safety production standardization consultation and evaluation for the participants, and explained the requirements, standards and other elements of safety production standardization work. Zhou Jiping, general manager of Yunnan Jianfeng, mobilized the establishment of secondary safety production standardization at the meeting, requiring all workshops and departments to prepare and report the data before the end of October, and both software and hardware meet the acceptance conditions, so as to complete the bid creation work by the end of the year. Through the mobilization meeting, the responsible persons of Yunnan Jianfeng and superstar companies and relevant personnel had in-depth exchanges, further unified their thinking, and improved Yunnan Jianfeng employees' understanding of safety production standardization. Everyone recognizes that carrying out safety production standardization work is not only to implement the spirit of a series of documents of the party and the country, but also a mandatory requirement of the government for enterprises, and it is also the need for the sustainable and healthy development of enterprises themselves. Through the development of safety production standardization, enterprises can be promoted to establish and improve the safety production responsibility system, improve the safety production management system, standardize the production operation behavior, investigate and control the hidden dangers of accidents, effectively control the sources of danger, make the production equipment and facilities meet the safety standards, and continuously improve
2020
07-31
Yunnan Peak Starts Secondary Security Standardization Creation
On June 19, Yunnan Jianfeng cement company held a mobilization meeting to further implement the requirements of the State Council, Yunnan Province, Pu'er City and Simao District Safety Supervision Bureau on carrying out safety production standardization work, and deploy the secondary safety standardization work. At the meeting, Liu Shenghua, deputy general manager of Yunnan Jianfeng, read out the requirements and work arrangements for creating a secondary enterprise for safety production standardization. The representative of Yunnan superstar Safety Technology Service Co., Ltd., the evaluation unit of safety production standardization, explained in detail the relevant knowledge of safety production standardization consultation and evaluation for the participants, and explained the requirements, standards and other elements of safety production standardization work. Zhou Jiping, general manager of Yunnan Jianfeng, mobilized the establishment of secondary safety production standardization at the meeting, requiring all workshops and departments to prepare and report the data before the end of October, and both software and hardware meet the acceptance conditions, so as to complete the bid creation work by the end of the year. Through the mobilization meeting, the responsible persons of Yunnan Jianfeng and superstar companies and relevant personnel had in-depth exchanges, further unified their thinking, and improved Yunnan Jianfeng employees' understanding of safety production standardization. Everyone recognizes that carrying out safety production standardization work is not only to implement the spirit of a series of documents of the party and the country, but also a mandatory requirement of the government for enterprises, and it is also the need for the sustainable and healthy development of enterprises themselves. Through the development of safety production standardization, enterprises can be promoted to establish and improve the safety production responsibility system, improve the safety production management system, standardize the production operation behavior, investigate and control the hidden dangers of accidents, effectively control the sources of danger, make the production equipment and facilities meet the safety standards, and continuously improve
2020
07-30
The Company shall organize special operation safety management training
What kind of management process is needed for the special operation permit? How to manage the ticket of the special operation permit? What are the contents of the eight kinds of special operations?... On June 17, the safety committee of the group company organized a special lecture on safety production to conduct systematic and comprehensive training on the safety management knowledge of special operations. The trainer invited for this training is Ge Zhengliang, head of EHS (Environmental Environment, Health Health, Safety) of Zhejiang Prodbang Pharmaceutical Co., Ltd. He has many years of experience in enterprise safety production management and is also a well-known safety management expert in Jinhua region. He has participated in the enterprise safety and environmental protection inspection organized by Jinhua Safety Supervision Bureau for many times and has a certain understanding of the situation of major enterprises in the peak. In this lecture, Ge Zhengliang divided into four parts: division of special operation license scope, special operation license management process, special operation license ticket management, and eight major types of special operation contents. Combined with relevant laws and regulations and his own practical experience in safety production management, Ge Zhengliang explained in simple terms eight special operation situations such as hot work, hoisting, high place, temporary power consumption, open circuit, blind plate plugging, restricted space, etc, standardize the licensed business division, approval department, the places to be paid attention to in the approval management of each type of operation, the responsibilities of the relevant approval department, the matters needing attention in on-site operation, the approval process, ticket management and other knowledge, and make a detailed description of the relevant special operation contents according to the working characteristics of peak subordinate enterprises. In addition, he also shared the experience of special operation safety management of Plo Pharmaceutical.
2020
07-31
Yunnan Jianfeng won the honor of "key leading enterprise in Pu'er City"
Recently, Yunnan Jianfeng Cement Company was awarded the honorary title of "2016 Pu'er Key Leading Enterprise" by the Pu'er Municipal Party Committee and Municipal Government. In recent years, according to the requirements of the group company's "three reductions and three improvements", Yunnan Jianfeng has focused on internal management and external market expansion, tried every means to reduce costs in production, timely controlled market trends in sales, and constantly refreshed various business indicators. While striving to create its own brand value, Yunnan Jianfeng always regards giving back to the society and serving local development as its own responsibility and obligation. Since the establishment of the company, Yunnan Jianfeng has actively responded to the government's call to support the construction of poor border areas and provide free cement to some poor people. Support the education construction in border areas and donate funds for students in need. At the same time, it has paid various taxes and fees on time in accordance with the law and has become a major profit and tax producer in Pu'er City for years. It has gradually grown from a new cement enterprise in Pu'er area to a leading enterprise in the cement industry. The honor of "key leading enterprises in Pu'er City in 2016" is the affirmation and recognition of Yunnan Jianfeng's work over the past few years by the local government and society. During the "Thirteenth Five-Year Plan" period, southwestern Yunnan is about to usher in an explosive stage of development. The construction of international railway projects, the construction of border expressway projects, the construction of airport projects and the construction of people's livelihood projects will all start this year. The acquisition of the honorary title of "Key Leading Enterprise in Pu'er City in 2016" will also provide strong support for Yunnan Jianfeng to strive for the right to supply these projects. (Li Yun)
2020
07-31