The first payment of peak 2013 corporate bonds is completed.
Release time:
2020-07-31
News from our newspaper 6# April 5 , Jianfeng Group 2013 Corporate Bond (Phase I) principal and interest payment was successfully completed.
2013 6 , approved by the China Securities Regulatory Commission, Jianfeng Group 2013 corporate bonds (Phase I) were publicly issued with an issue amount of RMB 3 billion. The issue is a 5 -year fixed rate bond with a coupon rate increase option and an investor resale option at the end of the third year, with a debt rating of AA +(up to AAA ). The coupon rate of the bonds was determined by market bidding and was finally determined as 4.90% , which was 1.55 percentage points lower than the benchmark interest rate of 5 -year bank loans at that time, fully reflecting the capital market's affirmation of Jianfeng Group. After the issuance of
Jianfeng Group's 2013 corporate bonds (the first issue), they were listed and traded on the Shanghai Stock Exchange on 7 September 2 of that year. As some investors chose to sell back at the end of the third year, the company paid the resale on 2016 6 May , reducing the bond balance to 2.77 .9 billion yuan. By the time the bonds mature, the total amount of principal and interest to be paid is 2.9 .1 billion yuan (including tax).
In order to do a good job in repaying the principal and interest of the bonds, the group company issued a public announcement on 5 25 , registered the relevant rights and interests, and entrusted China Securities Depository Shanghai Branch to pay and exchange interest on the bonds. 6 Month 5 , the maturity date of the bond, the principal and interest payment was successfully completed. Corporate bonds are securities issued by companies in the stock exchange market in accordance with legal procedures and agreed to repay the principal and interest within a certain period of time, and the issuance of corporate bonds is one of the main ways of direct financing. Bondholders are creditors of the company and have the right to obtain interest from the company and recover the principal at maturity on agreed terms, but do not participate in the company's operation, management and other activities. Once the bond matures, the company must repay the principal. Through the issuance of corporate bonds, not only can replace short-term borrowing, but also increase the company's working capital, is conducive to optimizing the company's debt structure, enhance the company's short-term solvency, control the company's cost of capital, so many enterprises become an important way of financing. However, with the gradual deepening of "deleveraging" since 2017
20 bonds have defaulted in 2018 , and the share prices of listed companies that broke out of the corporate debt crisis have all fallen sharply. Zhu Jianwei, secretary of the board of directors of Group Company, said that although there are many reasons for the emergence of the corporate debt crisis, in the final analysis, some enterprises with excessive expansion in the early stage and low development quality are in the general environment of monetary policy shift and increasing financing difficulties., The contradiction of lack of sufficient cash flow is prominent. The successful completion of the payment of the Peak 2013
Fu Yiwu)
More information
Jiang Xiaomeng Yunnan Jianfeng Lectures on Party Lessons
In order to implement the requirements of the higher-level party committee secretary to give in-depth party lectures in enterprises, on July 4, Jiang Xiaomeng, secretary of the party committee and chairman of the group company, gave a special lecture on "two studies and one doing" for party members at Yunnan Jianfeng Cement Company. In the lecture, Jiang Xiaomeng started from the background, overall requirements, learning and education content, and main measures of the "two studies and one doing" activities. He hoped that all party members and cadres would understand "awe, gratitude, humility, and decent", and put forward "What should the current enterprise do" and "How should the enterprise go in the future" and other issues. Jiang Xiaomeng analyzed the future development trend of cement and pharmaceutical industries in detail, emphasized the importance of seizing opportunities, and pointed out that with the homogenization of cement industry becoming more and more serious, if we want to take the road of differentiated brand development, the core of competition is to strengthen self management and maximize the cost, so as to improve the competitive advantage. As far as Yunnan Jianfeng is concerned, it is necessary to continuously improve the level of process technology management and increase the hourly output by increasing inspection efforts. Starting from strengthening the control of raw material procurement, the quality and price should be controlled. By strengthening sales management, vigorously develop direct agents, and strive to maximize the profit per ton; By strengthening equipment maintenance, reduce equipment accidents and further reduce the consumption of machine materials; Make good use of people, while constantly tapping talents and cultivating new people, we will gradually control the total number of workers and improve labor productivity. According to the current situation and the company's development strategy, what should the party members of the peak do? Jiang Xiaomeng asked all the party members and cadres of Yunnan peak to play a good vanguard and exemplary role and take the lead in learning new knowledge, new technology and new experience.
2020
07-30
Yunnan Peak Starts Secondary Security Standardization Creation
On June 19, Yunnan Jianfeng cement company held a mobilization meeting to further implement the requirements of the State Council, Yunnan Province, Pu'er City and Simao District Safety Supervision Bureau on carrying out safety production standardization work, and deploy the secondary safety standardization work. At the meeting, Liu Shenghua, deputy general manager of Yunnan Jianfeng, read out the requirements and work arrangements for creating a secondary enterprise for safety production standardization. The representative of Yunnan superstar Safety Technology Service Co., Ltd., the evaluation unit of safety production standardization, explained in detail the relevant knowledge of safety production standardization consultation and evaluation for the participants, and explained the requirements, standards and other elements of safety production standardization work. Zhou Jiping, general manager of Yunnan Jianfeng, mobilized the establishment of secondary safety production standardization at the meeting, requiring all workshops and departments to prepare and report the data before the end of October, and both software and hardware meet the acceptance conditions, so as to complete the bid creation work by the end of the year. Through the mobilization meeting, the responsible persons of Yunnan Jianfeng and superstar companies and relevant personnel had in-depth exchanges, further unified their thinking, and improved Yunnan Jianfeng employees' understanding of safety production standardization. Everyone recognizes that carrying out safety production standardization work is not only to implement the spirit of a series of documents of the party and the country, but also a mandatory requirement of the government for enterprises, and it is also the need for the sustainable and healthy development of enterprises themselves. Through the development of safety production standardization, enterprises can be promoted to establish and improve the safety production responsibility system, improve the safety production management system, standardize the production operation behavior, investigate and control the hidden dangers of accidents, effectively control the sources of danger, make the production equipment and facilities meet the safety standards, and continuously improve
2020
07-31
Yunnan Peak Starts Secondary Security Standardization Creation
On June 19, Yunnan Jianfeng cement company held a mobilization meeting to further implement the requirements of the State Council, Yunnan Province, Pu'er City and Simao District Safety Supervision Bureau on carrying out safety production standardization work, and deploy the secondary safety standardization work. At the meeting, Liu Shenghua, deputy general manager of Yunnan Jianfeng, read out the requirements and work arrangements for creating a secondary enterprise for safety production standardization. The representative of Yunnan superstar Safety Technology Service Co., Ltd., the evaluation unit of safety production standardization, explained in detail the relevant knowledge of safety production standardization consultation and evaluation for the participants, and explained the requirements, standards and other elements of safety production standardization work. Zhou Jiping, general manager of Yunnan Jianfeng, mobilized the establishment of secondary safety production standardization at the meeting, requiring all workshops and departments to prepare and report the data before the end of October, and both software and hardware meet the acceptance conditions, so as to complete the bid creation work by the end of the year. Through the mobilization meeting, the responsible persons of Yunnan Jianfeng and superstar companies and relevant personnel had in-depth exchanges, further unified their thinking, and improved Yunnan Jianfeng employees' understanding of safety production standardization. Everyone recognizes that carrying out safety production standardization work is not only to implement the spirit of a series of documents of the party and the country, but also a mandatory requirement of the government for enterprises, and it is also the need for the sustainable and healthy development of enterprises themselves. Through the development of safety production standardization, enterprises can be promoted to establish and improve the safety production responsibility system, improve the safety production management system, standardize the production operation behavior, investigate and control the hidden dangers of accidents, effectively control the sources of danger, make the production equipment and facilities meet the safety standards, and continuously improve
2020
07-31
Yunnan Peak Starts Secondary Security Standardization Creation
On June 19, Yunnan Jianfeng cement company held a mobilization meeting to further implement the requirements of the State Council, Yunnan Province, Pu'er City and Simao District Safety Supervision Bureau on carrying out safety production standardization work, and deploy the secondary safety standardization work. At the meeting, Liu Shenghua, deputy general manager of Yunnan Jianfeng, read out the requirements and work arrangements for creating a secondary enterprise for safety production standardization. The representative of Yunnan superstar Safety Technology Service Co., Ltd., the evaluation unit of safety production standardization, explained in detail the relevant knowledge of safety production standardization consultation and evaluation for the participants, and explained the requirements, standards and other elements of safety production standardization work. Zhou Jiping, general manager of Yunnan Jianfeng, mobilized the establishment of secondary safety production standardization at the meeting, requiring all workshops and departments to prepare and report the data before the end of October, and both software and hardware meet the acceptance conditions, so as to complete the bid creation work by the end of the year. Through the mobilization meeting, the responsible persons of Yunnan Jianfeng and superstar companies and relevant personnel had in-depth exchanges, further unified their thinking, and improved Yunnan Jianfeng employees' understanding of safety production standardization. Everyone recognizes that carrying out safety production standardization work is not only to implement the spirit of a series of documents of the party and the country, but also a mandatory requirement of the government for enterprises, and it is also the need for the sustainable and healthy development of enterprises themselves. Through the development of safety production standardization, enterprises can be promoted to establish and improve the safety production responsibility system, improve the safety production management system, standardize the production operation behavior, investigate and control the hidden dangers of accidents, effectively control the sources of danger, make the production equipment and facilities meet the safety standards, and continuously improve
2020
07-30
The Company shall organize special operation safety management training
What kind of management process is needed for the special operation permit? How to manage the ticket of the special operation permit? What are the contents of the eight kinds of special operations?... On June 17, the safety committee of the group company organized a special lecture on safety production to conduct systematic and comprehensive training on the safety management knowledge of special operations. The trainer invited for this training is Ge Zhengliang, head of EHS (Environmental Environment, Health Health, Safety) of Zhejiang Prodbang Pharmaceutical Co., Ltd. He has many years of experience in enterprise safety production management and is also a well-known safety management expert in Jinhua region. He has participated in the enterprise safety and environmental protection inspection organized by Jinhua Safety Supervision Bureau for many times and has a certain understanding of the situation of major enterprises in the peak. In this lecture, Ge Zhengliang divided into four parts: division of special operation license scope, special operation license management process, special operation license ticket management, and eight major types of special operation contents. Combined with relevant laws and regulations and his own practical experience in safety production management, Ge Zhengliang explained in simple terms eight special operation situations such as hot work, hoisting, high place, temporary power consumption, open circuit, blind plate plugging, restricted space, etc, standardize the licensed business division, approval department, the places to be paid attention to in the approval management of each type of operation, the responsibilities of the relevant approval department, the matters needing attention in on-site operation, the approval process, ticket management and other knowledge, and make a detailed description of the relevant special operation contents according to the working characteristics of peak subordinate enterprises. In addition, he also shared the experience of special operation safety management of Plo Pharmaceutical.
2020
07-31
Yunnan Jianfeng won the honor of "key leading enterprise in Pu'er City"
Recently, Yunnan Jianfeng Cement Company was awarded the honorary title of "2016 Pu'er Key Leading Enterprise" by the Pu'er Municipal Party Committee and Municipal Government. In recent years, according to the requirements of the group company's "three reductions and three improvements", Yunnan Jianfeng has focused on internal management and external market expansion, tried every means to reduce costs in production, timely controlled market trends in sales, and constantly refreshed various business indicators. While striving to create its own brand value, Yunnan Jianfeng always regards giving back to the society and serving local development as its own responsibility and obligation. Since the establishment of the company, Yunnan Jianfeng has actively responded to the government's call to support the construction of poor border areas and provide free cement to some poor people. Support the education construction in border areas and donate funds for students in need. At the same time, it has paid various taxes and fees on time in accordance with the law and has become a major profit and tax producer in Pu'er City for years. It has gradually grown from a new cement enterprise in Pu'er area to a leading enterprise in the cement industry. The honor of "key leading enterprises in Pu'er City in 2016" is the affirmation and recognition of Yunnan Jianfeng's work over the past few years by the local government and society. During the "Thirteenth Five-Year Plan" period, southwestern Yunnan is about to usher in an explosive stage of development. The construction of international railway projects, the construction of border expressway projects, the construction of airport projects and the construction of people's livelihood projects will all start this year. The acquisition of the honorary title of "Key Leading Enterprise in Pu'er City in 2016" will also provide strong support for Yunnan Jianfeng to strive for the right to supply these projects. (Li Yun)
2020
07-31
Contact Us
No. 88 Wujiang East Road, Jinhua City, Zhejiang Province, China
Tel: +86-579-82326868
Fax : +86-579-82324666
©2023 Zhejiang Jianfeng Group Co., Ltd. Powered by: www.300.cn SEO Business License
SAF Coolest v1.2 设置面板 SHJSS-AHDB-FSSQE-ZSW
无数据提示
Sorry, the current column has no content !
You can view other columns or return to Home Page