News Center

Home page

Peak Report

News reports

Learning safety guidance materials

Release time:

2020-08-14

Learning Safety Tutoring Textbook Feeling

Safety knowledge is a hodgepodge, which contains a lot of contents, including safety laws and regulations, safety technical knowledge such as machinery, electricity and special equipment, safety production management contents such as safety production standardization, safety production inspection and hidden danger management, etc.

Employees are the core of corporate safety. Each employee must have a good safety awareness and improve the subjective initiative and safety skills of personal safety in order to truly obtain safety protection. The work of the internal personnel of the enterprise has its own division of labor, and the safety knowledge that needs to be learned is also different. Electricians need to know the knowledge of safe operation with electricity, mechanics need to learn the knowledge of safe operation such as welding and gas cutting, and operators need to master the corresponding risk countermeasures according to the job type and the identified safety risk factor category.

Enterprise employees learn safety knowledge in many forms, including internal training, training organized by safety supervision, through the Internet, newspapers, media, etc., but these knowledge are more specific but not systematic and comprehensive.

Where can I learn systematic safety knowledge? How can I learn some safety production knowledge that I want to know? In recent years, I found that the "Certified Safety Engineer Qualification Examination Guidance Textbook" has very systematic safety knowledge and management knowledge, which is very worthy of our study.

Through study, I have been well applied in practical work. For example, during a safety inspection, I found that there is a potential safety hazard in the water supplement of the circulation box in a workshop. The water supplement pipeline adopts temporary hose (outer diameter 40 cm or so), and water is taken from one side of the pedestrian passage to connect the pipeline. The pipeline is directly placed on the ground and leads to the other side of the road, the water outlet flows into a one-meter-high water tank. Due to the height difference and the heavy pipe, two metal ball valves (each weighing about 2 kg) are used to press the pipe without fixing measures. There are four categories of risk factors in the production process, namely, human factors, no factors, environmental factors and management factors. We usually think that this pipe is not dangerous. In fact, this kind of behavior has two potential safety hazards. A

cm high pipe is placed horizontally on the pedestrian passage. In case someone does not pay attention to it when passing, stumbles and falls down and is injured, an accident will occur. The two metal ball valves have no fixing measures. Some staff members work beside the water tank and touch the pipe with height difference. The pipe falls off, two ball valves also fall at the same time, hitting employees, and accidents will occur. It is also possible that a pedestrian stumbled on the pipe and drove the pipe at the inlet of the water supplement tank. The pipe with height difference fell, causing the ball valve to fall. The person who stumbled on the pipe may be injured, the person beside the water supplement tank may be injured by the valve, and two safety accidents occurred at the same time. In the above example, the explanation of safety knowledge is that the safety awareness of the temporary pipeline placement personnel and the safety management personnel in the workshop is weak, and they do not know that the pedestrian passage in the production and operation site must be unobstructed and cannot exist in an unstable state. These two safety principle knowledge are explained in these principle guidance materials.

So, how do we eliminate the above security risks? We can install a fixed water supply pipeline from a height or buried in the ground, and the valve disappears at the scene, so the pedestrian passage is unobstructed, and the unstable state of the object (valve) does not exist, and the hidden danger will not be eliminated.

Through the study of "Certified Safety Engineer Qualification Examination Guidance Textbook", we know that all safety accidents can be prevented and avoided. Every accident has its cause. Starting from the root cause of the accident, we can cut off the conditions for the occurrence of the accident, so that we can prevent the occurrence of accidents, analyze and summarize all kinds of safety accidents, and draw inferences from one instance, take other people's accidents as our accidents, learn from them and avoid similar accidents.

The author suggests that when all units purchase learning books with various qualifications, they should not forget to register books with professional qualifications for safety, buy them and distribute them to relevant management personnel, or put them in the reading room for everyone to borrow. This year is our company's "year of safety education", so that we can learn more about safety. (Song Shijie, Production Department, Pharmaceutical Company)

More information

City Red Cross thanks spike help "anti-epidemic"

On February 26, Jinhua City Red Cross Party Secretary, Executive Vice President Shi Yiwei and his entourage to visit the peak, the peak in the prevention and control of the new coronary pneumonia epidemic actively contribute to love, brave social responsibility of the great love and kindness to express gratitude. Jiang Xiaomeng, chairman of the group company, Huang Jinlong, deputy general manager of the group company and general manager of the pharmaceutical company, and Xiang Chongping, deputy general manager of the group company, had a discussion with Vice President Shi Yiwei and his party. In order to solve the difficult problems for caring enterprises to resume work and production, the Municipal Red Cross Society, based on its own functional positioning and giving full play to its unique advantages, conducted a large feedback and return visit to caring enterprises, and jointly established three Red Cross volunteer service teams, including traditional Chinese medicine service, psychological assistance, and emergency rescue training, to take "eight measures" to help caring enterprises resume work and production. Vice President Shi Yiwei led the backbone of three volunteer service teams to the peak for a return visit, expressing his gratitude for the contribution made by the peak in the prevention and control of the new coronary pneumonia epidemic, and sent a letter of thanks and the "New Coronary Pneumonia Prevention and Control Enterprises Resuming Work and Resuming Production Protection Manual". Chairman Jiang Xiaomeng introduced the industrial layout, production and operation of the peak, focusing on the resumption of work and production of the peak enterprises, and put forward opinions and suggestions on the reduction and exemption of basic electricity charges for enterprises, the support policies for small and medium-sized enterprises, and the payment of "five insurance and one fund. (Reporter Ni Yingzhen)

2020

07-15

Peak 2013 corporate bonds complete principal and interest payments

News from our newspaper On November 20, Zhejiang Jianfeng Group Co., Ltd. successfully completed the payment of principal and interest on 2013 corporate bonds (Phase II) (hereinafter referred to as "13 Jianfeng 02"). At this point, all the corporate bonds approved for issuance in 2013 have been paid. In 2013, with the approval of document No. [2013]595 of China Securities Regulatory Commission, the company was allowed to issue corporate bonds with a face value of no more than 0.6 billion yuan to the public, with a debt rating of AA +. On June 5, 2013, the Company issued the 2013 Corporate Bonds (Phase I) ("13 Peak 01"), which raised $0.3 billion at a coupon rate of 4.90 per cent, 1.55 percentage points lower than the then five-year benchmark interest rate for bank loans. On November 20, 2014, "13 Peak 02" was successfully issued, raising 0.3 billion yuan again at a coupon rate of 5.09, and was listed on the Shanghai Stock Exchange on December 11, 2014. The ability to raise 0.6 billion yuan from the capital market at a lower cost reflects investors' recognition of the company's "cement + pharmaceutical" dual business structure and expectations of the company's good operating performance. On June 5, 2018, the first issue of Jianfeng Group's 2013 corporate bonds was due to complete the payment of principal and interest, and now the second issue of corporate bonds has also successfully completed the payment of principal and interest. In the real economic growth is weak, business operations continue to explode, the company in a short period of time successfully completed two issues of a total of 0.6 billion yuan of corporate bonds principal and interest payment work, fully reflecting the company's good operating results in recent years.

2020

07-31

Company Leaders Attend Jinhua Development Conference

News from our newspaper On November 17, the second 2019 Jinhua Development Conference with the theme of "Insist on high-quality integration into the Yangtze River Delta to build a metropolitan area" opened in Jinhua, Zhejiang. More than a thousand people from the scientific and educational circles, business circles, and overseas Chinese from home and abroad Business people, representatives of "New Golden Chinese" and representatives of outstanding Jinhua students attended the meeting. Group leaders Jiang Xiaomeng, Yu Jianhong and Huang Jinlong attended the relevant activities of the conference. As a representative of the Jinhua business community, Jiang Xiaomeng, chairman of the group company, made a keynote speech at the "Scientist" and "Entrepreneur" Innovation Dialogue of the Development Conference, expressing his views on how Jinhua enterprises can improve their technological competitiveness. As the head of Jinhua local enterprise with a history of more than 60 years, Jiang Xiaomeng has a profound experience in promoting the development of enterprises through science and technology. Combined with the reality of peak scientific and technological innovation, he pointed out in his speech that the improvement of scientific and technological innovation ability is an urgent event for Jinhua small and medium-sized enterprises. Private enterprises cannot achieve high-quality development without the support of scientific and technological forces; with the progress of society, the improvement of people's living standards and the continuous improvement of cultural quality, the demand for products and the pursuit of product quality have also undergone qualitative changes. Only products with scientific and technological connotations can attract consumers. He suggested that the government and relevant institutions should establish an information platform to further understand the scientific and technological support that enterprises need in the transformation, understand what kind of help scientific and technological personnel can provide to enterprises, do a good job in the information docking of scientists and entrepreneurs, further attract investment and wisdom, give full play to the scientific and technological achievements of academicians and experts and the capital advantages of businessmen at home and abroad, and promote Jinhua enterprises to better integrate into Changsan

2020

07-31

Company Leaders Attend Jinhua Development Conference

2020

07-22

The Party Committee of the Group conducts thematic education and concentrated study.

On November 12, the Party Committee of the Group Company held a "Do not forget your initiative mind, Keeping in mind the mission" thematic education and study meeting to focus on the relevant spirit of the central and higher Party committees on thematic education and the key points in the "Decision of the Central Committee of the Communist Party of China on Adhering to and Improving the Socialist System with Chinese Characteristics, Promoting the Modernization of the National Governance System and Governance Capacity" previously held at the Fourth Plenary Session of the 19th CPC Central Committee of the 19th CPC Central Committee, and make arrangements for further promoting thematic education in the whole group. According to the central government's schedule for the second batch of thematic education, the group party committee requires all party members and cadres to deeply understand the significance of carrying out the thematic education of "not forgetting the original heart and keeping in mind the mission", and firmly grasp the "keep the original heart, undertake the mission, find the gap, and grasp the implementation" The general requirements of the group party committee members will also go to various enterprises separately in the near future, carry out research on the development of theme education, the current difficulties faced by enterprises and the issues of concern to employees, so as to achieve the effect of closely combining theme education with the promotion of enterprise management, and strengthening the close combination of party building and enterprise development. (this newspaper reporter)

2020

07-31

Company Leaders Attend Jinhua Development Conference

2020

07-31

< 1...26 27 28...61 > 跳转到页