I have a date with Spikes
Release time:
2020-08-14
I have an appointment with Jianfeng
■ Yunnan Jianfeng Luo Meiyan
As the saying goes, "rely on mountains to eat mountains, rely on water to eat water". In my hometown Pu 'er, there is no vast sea or endless grassland. Looking around, there are mountains everywhere. Because it belongs to the karst landform, the mountains cannot effectively develop agriculture. The villagers have been in the wind and rain for generations. From sunrise to sunset, they still cannot fill their stomachs. Therefore, they especially envy those who work in factories. In the year of
, I was still young, and the first factory was built in my hometown, which was a cement factory. In order to support the construction of the factory, my father and the villagers gave up the only paddy field for raising seedlings. The cement factory is less than a mile away from my home. My brother works in the factory, and colleagues often come to play at home. Listen to the elder brother said, some elder brothers do machine repair, some elder sisters do laboratory tests. I asked curiously: "how to test it?" the sisters told me a lot, what titration end point from red to bright yellow, yellow to bright purple, and so on. Although I don't know what it means, I still listened very hard and thought to myself, this kind of technology is so mysterious! Since then, I have been full of fantasy and expectation for the subject of "laboratory tests. In the year of
, I graduated, and I happened to buy the cement factory in front of my house to build a bigger and more advanced one. When I went to apply for a job, the director said, "I know you have the certificate of electronicist and the certificate of storekeeper, but now we have no shortage of people. Only the central control building has just been built and there is a shortage of cleaners. What are you doing?" I asked, "Is it connected to the laboratory?" He said, "It's the building in the laboratory." Hearing this sentence, I readily replied: "dry!"
At that time, the face of Yunnan Jianfeng Cement Company had not yet taken shape. The ground was freshly planed loose soil, and the roads were mud roads. Workers, construction teams, installation teams, and material delivery came and went. It was rainy season. The mud ground stepped on a pit, and mud and water could pass through the instep. Everyone comes and goes with the central control building as the center. Just one staircase, sweeping down from the top of the building to the hall, has to dump a few baskets of soil. As soon as I go to work every day, I sweep the stairs twice, drag them twice, and then wipe them twice with a towel. Usually, I haven't finished yet. When I come up, the mud on my feet is enough to clean for half a day. In addition to the stairs and corridors, I am also responsible for the hygiene of several leading offices and conference rooms. The conference room has a lot of meetings, often for five or six hours at a time. After making tea in my room and cleaning outside, I am often too busy to have breakfast. At the end of the day, when I got home, I didn't even have the strength to eat. I fell asleep on the sofa. Although I work very hard every day, my heart is full of motivation when I can watch the laboratory technicians go to and from work. Because I have never thought of "giving up", because I have always had a goal-to do tests. The difficult environment in the early days of the factory polished my patience and carefulness, which is also the quality of a laboratory technician.
went through several positions. A year ago, I was finally transferred to the current quality management department. I was so excited. On the first day of work in the new post, I saw neat rows of laboratory equipment, like standing in front of the sacred hall, serious and mysterious, making people eager to walk in. At first, I couldn't remember the steps, so I had to hold the book and learn step by step. Seeing the old masters operating with ease, don't mention the envy in my heart! To make matters worse, even if you hold a book, you often make mistakes while doing it. You forget to add too much EDTA when titrating aluminum and potassium sodium sakei when titrating magnesium. All kinds of situations always occur. But I will not surrender to difficulties! In those days, I did what others did at work, what others did at lunch break, what others did after work, over and over again, over and over again, and my hands were often burned with big scars and small marks by electric stoves. Any link, as long as I feel is not perfect, I will do it again, until the result is very accurate, I will let myself go. Many samples absorb water quickly and need to be very agile in weighing samples. In view of this, one day I practiced weighing 0.1000 g samples from morning till night, and I did not stop until I finally needed only one spoonful of samples to be within the range. As soon as the spirit relaxed, I found that my legs were swollen, but the pride in my heart far exceeded the pain of my feet.
is probably practice makes perfect. After more than a year of study and exercise, I can now do it in an orderly way. I will never forget what to add or get burned. Although the process of work is monotonous and repetitive, I never think it is boring, but I think it is a kind of enjoyment, especially when the results come out, I will feel happy sincerely. When new colleagues join, I will patiently break down each step to show them, tolerate their carelessness and learn from their advantages. I know that there is no best technology, only better technology; only by standing high can you see farther.
I love my job, I will "date" with spikes to the end!
More information
The company's vocational skill level self-identification training began.
After preparing the handout materials and question bank for the previous stage of vocational skill grade identification training, daye peak cement company conducted the vocational skill grade identification training for the machine repair team of the manufacturing department on August 10. On August 12 and 18, the pharmaceutical company also organized two phases of vocational skill level identification training for pharmaceutical preparation workers. According to the national skill level standard, the group company is divided into four grades: grade 5/junior worker, grade 4/intermediate worker, grade 3/senior worker and grade 2/technician. According to the analysis of employee registration, since there is only one type of job for pharmaceutical preparation workers, and cement production workers include cement central controller, cement quality inspector, cement clinker calciner, cement manufacturer, cement production inspection worker and other types of jobs, the number of applicants is less than that of cement production workers. Most of the employees who signed up were identified as participating in the four levels of vocational skills. According to preliminary statistics, there are now 155 employees who have signed up for their professional skill level, including 47 pharmaceutical preparation workers and 108 cement production workers. The human resources department of the group company is stepping up efforts to organize personnel to examine the qualifications of the employees whose registration grades are identified, and then enter the Zhejiang professional ability integration platform for formal registration after passing the examination. According to the national vocational skill standards and other content, each unit carries out targeted training for employees who participate in the independent identification of vocational skill levels. The training is conducted through on-site teaching, online teaching, and learning platform question bank exercises. After the training, the group company will organize the employees who participate in the grade identification to carry out examination and assessment, and those who pass the examination will complete the grade identification and issue the skill grade certificate. It is understood that in order to ensure the quality of vocational skill level identification, after the company was approved to independently identify the vocational skill level, the human resources department of the group organized all units to compile the question bank for various types of work in combination with the actual situation of the enterprise and with reference to the national vocational skill standards and training syllabus and other materials. after classification, unification and standardization, verification and proofreading, the preparation of the question bank has been basically completed. After being submitted to the superior unit for examination and approval, the company will import the question bank on the enterprise university platform to facilitate employees to prepare for the examination. The question bank for the independent identification of vocational skills level will also be extracted from the question banks of various industries, including professional ethics, basic knowledge, safety and environmental protection knowledge, laws and regulations knowledge, professional work practice and other national vocational skills standards. Basic requirements. The examination and assessment for independent determination of vocational skill level is tentatively scheduled for mid-September.
2021
08-23
Hu Guoyun, vice mayor of Pu'er, visited the peak
On July 16, a delegation led by Hu Guoyun, vice mayor of Pu'er City, Yunnan Province, and heads of Pu'er SASAC, Industrial Park Management Committee, Investment Promotion Bureau and other departments visited the headquarters of the group company. In the exchange with Jiang Xiaomeng, Yu Jianhong and other group leaders, Hu Guoyun expressed his gratitude to Jianfeng Group on behalf of the Pu'er Municipal Party Committee and Municipal Government. He said that the investment and entrepreneurship from Jianfeng to Pu'er not only promoted the development of Pu'er's regional industrial economy, but also made outstanding contributions to the local poverty alleviation. The two sides also exchanged and discussed issues such as strengthening in-depth cooperation between the two sides.
2021
07-21
Municipal SASAC Party Committee Visited Jianfeng Old Party Member
On June 28, Huang Zunhui, a second-level researcher of the State-owned Assets Supervision and Administration Commission of Jinhua City, visited Jianfeng Group and made a special trip to visit two retired party members, Chen Bingxiang and Yin Rongfu. Among the two Jianfeng veteran party members, Chen Bingxiang has been engaged in party affairs for nearly 30 years, and Yin Rongfu has won the honor of outstanding party members in Zhejiang Province and is a representative of Jianfeng party workers and party members. On behalf of the party committee of the Municipal State-owned assets Supervision and Administration Commission, Huang Zunhui expressed condolences to the two veteran party members, thanked the older generation of party members for their contributions, and exchanged views with Jiang Xiaomeng, secretary of the party committee and chairman of the group, and Qin Xuping, member of the party committee and chairman of the trade union, and fully affirmed the development of peak in recent years and the improvement of the level of party building work.
2021
07-12
"I'll teach you a lesson." Concluded successfully.
On the afternoon of June 24, as one of the highlights of the company's 2021 safety production month series of activities, the second phase of the "I'll give you a lesson" safety training was held at the group headquarters. the management personnel, production backbones and personnel from all departments and offices of the group gathered at the scene. foreign enterprises took safety "big lessons" through video, which was more effective than the teaching. At this point, the "I'll give you a lesson" safety training has come to a successful conclusion.
2021
07-12
Glory in the Party's 50-year-old Party Member Xi Ling Commemorative Medal
On June 23, the party committee of the group company sent a special person to visit and awarded the commemorative medals of "50 years of Glory in the Party" to six veteran party members. 2021 is the 100 anniversary of the founding of the Communist Party of China. For the first time, the Party Central Committee issued the "50 Years of Glory in the Party" commemorative medal to surviving party members who have reached the 50th anniversary of the party and have always performed well. The Organization Department of the Central Committee also specially issued the "Administrative Measures for the Issuance of Commemorative Medals of" Glory in the Party for 50 Years "", which stipulates the issuance procedures, issuance methods, production, and management of commemorative medals. In the future, the "50 Years of Glory in the Party" commemorative medal will be issued as a regular task and will be issued once every year around July 1.
2021
07-12
What is the exact time of the first Congress of the Communist Party of China? Which "big" representatives boarded the red boat in South Lake? What is the connection between the 1972 Sino-US Joint Communique and Hangzhou? On the morning of June 24th, the Party Committee of the Group Company invited members of the Party History Learning and Education Group of Zhejiang Provincial Party Committee and the vice president of Zhejiang Branch of China News Service to give a special party class of "returning to the scene of party history and reappearing the moment of party history" for the party members and cadres of the Company.
2021
07-01