News Center

Home page

Peak Report

News reports

"Busy Man" Zhao Chunquan

Release time:

2020-08-14

Zhao Chunquan, entered Jianfeng Pharmaceutical Company in 8# May 2009 , and entered Jianfeng Health Technology Company in 2014 . He is currently the director of Jianfeng Health Plant Extraction Workshop and the director of Chinese Herbal Pieces Workshop.

"Busy Man" Zhao Chunquan

Zhao Chunquan is a busy man. He plunges into the workshop site as soon as he goes to work every day, and it is difficult to find him in the office. When he finally saw him after an "appointment", he was covered with yellow powder and joked with a smile that "I just came back from work on the construction site". In fact, he had been busy in the Chinese herbal medicine workshop for a long time.

Zhao Chunquan has been busy since he took part in the work-entered the factory, 9 participated in the preparation of the plant medicine factory, responsible for the installation, debugging and trial production of the equipment, followed by the pharmaceutical health care product workshop, the peak health Chinese medicine decoction pieces and the plant extraction workshop. In the past few years of peak work, a workshop was basically built. He used to participate in debugging, trial production, straightened out and handed over, and then started a new project.

has gone through debugging, trial production and certification work in several workshops. Zhao Chunquan is also experienced, but he said that the busiest is the newly-built automatic extraction workshop. Everything is new, the new equipment is more advanced, the production process is new, there are many things to learn, and besides the study of hardware equipment, they should also be familiar with computer operation. The newly recruited employees in the workshop basically have no experience in drug production. They should not only teach equipment operation, but also teach labor discipline, GMP knowledge, safety production, etc, all this work is on him.

2015 12# In mid-April, the planting workshop entered the equipment commissioning stage. Zhao Chunquan first followed the manufacturer's personnel to learn the equipment operation one by one. The whole workshop is expected to have 170 sets of equipment. In order to ensure the smooth progress of the follow-up work, it can only be carried out overtime. During that half a month, there was no lunch break or weekend, and finally the debugging was completed at the end of the month.

In the trial production stage, although the manufacturer has also organized relevant training, it still depends more on Zhao Chunquan. At the beginning of the trial production, he took the staff with him from the equipment principle, operation method, matters needing attention, production process and so on, and demonstrated them on the spot one by one. After repeating this for three or four times, let the employee operate independently. He watched from the side and corrected any mistakes. At each pre-shift meeting, he will also spare

20 minutes to explain the operation precautions and other contents, so that employees can master the operation skills faster and better. During the period of

, Zhao Chunquan's mind was spent on workshop production. He worked overtime during the day and at night. It was normal to work

12 hours a day. Generally, he came to work more than 7 at night. After arranging the workshop in the morning, he went back from work more than 10 . If he encounters equipment failure or production process problems, he can only stay and squint against the back of the chair for a while when he is sleepy. He said that at most, he worked for three days and two nights in a row. Sometimes I get off work on time during the day, and when I have a problem with the night shift, I have to rush back to the workshop in the early morning to deal with it. After the

operator was able to take up his post skillfully, the workshop production was gradually on the right track, but Zhao Chunquan was still busy and just shifted his focus to optimizing the process and improving the production equipment. He will go to various posts to inspect every day, constantly looking for problems, and the improvement of the workshop is also going on. For example, because the equipment in the feeding post is very high and the feeding port is above the equipment, a ladder is needed when feeding, which is not only inconvenient but also has potential safety hazards. Therefore, Zhao Chunquan arranged personnel to add an operating platform to these processes, which is convenient for handling and safer. The on-line monitoring of alcohol agent in production has not been very stable. After a period of observation, Zhao Chunquan found that the reason was the vibration of the equipment, so they carried out technical transformation on the pipeline of the equipment, changing the fixed pipeline at the pipeline connection into a hose, reducing the vibration caused by the operation of the equipment, and the monitoring data were stable. The plant extraction workshop has also improved the dust removal facilities, changing the water film dust removal to bag dust removal, which not only improves the product recovery rate, but also reduces the burden of sewage treatment.

Zhao Chunquan said that busyness has become the norm at work. At the beginning, his family would complain. He was also distressed about it, but after a long time, his family understood. Looking at the smooth production of batches of products, he felt that his hard work was worth it, and he was very at ease. (Reporter Ni Yingzhen)

More information

Tianjin Flemish Company Donates Anti-epidemic Materials

On the morning of July 13, Tianjin Jianfeng Flanders Pharmaceutical Technology Development Co., Ltd. donated materials to the Tianjin Development Zone Charity Association to help the development zone community fight the epidemic.

2020

08-05

Cool in summer

In late July, leaders of the group company Jiang Xiaomeng, Yu Jianhong, Chen Tianci and Qin Xuping visited subordinate enterprises separately and sent heatstroke prevention and cooling supplies to employees working under high temperature, urging everyone to pay attention to heatstroke prevention and cooling and safe production work to ensure good physical condition.

2020

08-05

Inventory of the first half of the work gains and losses after planning the development of the epidemic enterprise ideas company fully deployed the second half of the work

On July 17 and 18, the Group's work analysis meeting for the first half of 2020 was held at the Peak Building of the Group's headquarters to summarize and review the work in the first half of the year and make arrangements for the work in the second half of the year.

2020

08-05

The company requires to do a good job in summer safety production

The high temperature season is approaching, and the group company issued a notice a few days ago to make arrangements for safe production in summer.

2020

08-05

The company requires to do a good job in summer safety production

The high temperature season is approaching, and the group company issued a notice a few days ago to make arrangements for safe production in summer. The notice requires all subordinate units of the company to attach great importance to the work of production safety in summer, and all production and business units should hold a special meeting on production safety in summer. According to the characteristics of production in summer, they should focus on safety risk analysis for mines, outdoor operations and high-temperature posts, and implement control measures to avoid the occurrence of safety accidents such as scalding, heatstroke and electric shock. In order to further strengthen the safety production management in the high temperature season, the notice requires the main person in charge of each production and business unit to lead a team to conduct a comprehensive inspection of the production and business premises according to the characteristics of summer production; strengthen the daily safety production inspection of key posts and special posts; timely rectify the found unsafe behaviors and hidden dangers; Strengthen the management of the storage and use of flammable, explosive, dangerous chemicals and drugs; cooling measures shall be taken for the space exceeding the storage temperature limit of articles. If it is found that the electrical equipment circuit and exhaust fan circuit are aged and damaged, replace them in time and keep the grounding wire in good condition. Do a good job in checking the fire pool, pipeline water pressure and fire extinguishing equipment to ensure that the fire fighting facilities are sensitive, intact and reliable. The high temperature in summer is also a period of frequent occurrence of heatstroke and other diseases. The notice requires all units to do a good job in heatstroke prevention and cooling, implement various relevant measures, and equip necessary cooling facilities or materials such as fans, air conditioners, ice cubes and other cooling facilities or materials according to the conditions of the production site; do a good job in the distribution of heatstroke prevention drugs, supplies and cool drinks in workshops, warehouses, construction sites and other production lines; strengthen canteen management to prevent food poisoning. (this newspaper reporter)

2020

07-22

The company requires to do a good job in summer safety production

2020

07-31

< 1...20 21 22...61 > 跳转到页