News Center

Home page

Peak Report

News reports

"Busy Man" Zhao Chunquan

Release time:

2020-08-14

Zhao Chunquan, entered Jianfeng Pharmaceutical Company in 8# May 2009 , and entered Jianfeng Health Technology Company in 2014 . He is currently the director of Jianfeng Health Plant Extraction Workshop and the director of Chinese Herbal Pieces Workshop.

"Busy Man" Zhao Chunquan

Zhao Chunquan is a busy man. He plunges into the workshop site as soon as he goes to work every day, and it is difficult to find him in the office. When he finally saw him after an "appointment", he was covered with yellow powder and joked with a smile that "I just came back from work on the construction site". In fact, he had been busy in the Chinese herbal medicine workshop for a long time.

Zhao Chunquan has been busy since he took part in the work-entered the factory, 9 participated in the preparation of the plant medicine factory, responsible for the installation, debugging and trial production of the equipment, followed by the pharmaceutical health care product workshop, the peak health Chinese medicine decoction pieces and the plant extraction workshop. In the past few years of peak work, a workshop was basically built. He used to participate in debugging, trial production, straightened out and handed over, and then started a new project.

has gone through debugging, trial production and certification work in several workshops. Zhao Chunquan is also experienced, but he said that the busiest is the newly-built automatic extraction workshop. Everything is new, the new equipment is more advanced, the production process is new, there are many things to learn, and besides the study of hardware equipment, they should also be familiar with computer operation. The newly recruited employees in the workshop basically have no experience in drug production. They should not only teach equipment operation, but also teach labor discipline, GMP knowledge, safety production, etc, all this work is on him.

2015 12# In mid-April, the planting workshop entered the equipment commissioning stage. Zhao Chunquan first followed the manufacturer's personnel to learn the equipment operation one by one. The whole workshop is expected to have 170 sets of equipment. In order to ensure the smooth progress of the follow-up work, it can only be carried out overtime. During that half a month, there was no lunch break or weekend, and finally the debugging was completed at the end of the month.

In the trial production stage, although the manufacturer has also organized relevant training, it still depends more on Zhao Chunquan. At the beginning of the trial production, he took the staff with him from the equipment principle, operation method, matters needing attention, production process and so on, and demonstrated them on the spot one by one. After repeating this for three or four times, let the employee operate independently. He watched from the side and corrected any mistakes. At each pre-shift meeting, he will also spare

20 minutes to explain the operation precautions and other contents, so that employees can master the operation skills faster and better. During the period of

, Zhao Chunquan's mind was spent on workshop production. He worked overtime during the day and at night. It was normal to work

12 hours a day. Generally, he came to work more than 7 at night. After arranging the workshop in the morning, he went back from work more than 10 . If he encounters equipment failure or production process problems, he can only stay and squint against the back of the chair for a while when he is sleepy. He said that at most, he worked for three days and two nights in a row. Sometimes I get off work on time during the day, and when I have a problem with the night shift, I have to rush back to the workshop in the early morning to deal with it. After the

operator was able to take up his post skillfully, the workshop production was gradually on the right track, but Zhao Chunquan was still busy and just shifted his focus to optimizing the process and improving the production equipment. He will go to various posts to inspect every day, constantly looking for problems, and the improvement of the workshop is also going on. For example, because the equipment in the feeding post is very high and the feeding port is above the equipment, a ladder is needed when feeding, which is not only inconvenient but also has potential safety hazards. Therefore, Zhao Chunquan arranged personnel to add an operating platform to these processes, which is convenient for handling and safer. The on-line monitoring of alcohol agent in production has not been very stable. After a period of observation, Zhao Chunquan found that the reason was the vibration of the equipment, so they carried out technical transformation on the pipeline of the equipment, changing the fixed pipeline at the pipeline connection into a hose, reducing the vibration caused by the operation of the equipment, and the monitoring data were stable. The plant extraction workshop has also improved the dust removal facilities, changing the water film dust removal to bag dust removal, which not only improves the product recovery rate, but also reduces the burden of sewage treatment.

Zhao Chunquan said that busyness has become the norm at work. At the beginning, his family would complain. He was also distressed about it, but after a long time, his family understood. Looking at the smooth production of batches of products, he felt that his hard work was worth it, and he was very at ease. (Reporter Ni Yingzhen)

More information

Ge Shiqian War "Epidemic" Poetry Series

2020

07-31

Daye Peak Declared 4 Invention Patents Last Year

In 2019, Daye Jianfeng Cement Company changed its thinking, actively explored and tested the use of new materials, and summarized the research results in a timely manner, and successively declared 4 invention patents. In the production process of low-alkali cement, Daye Peak changed the traditional scheme of using high-grade sandstone ingredients alone to replace part of the sandstone and part of the iron correction material with iron ore waste soil, which not only controlled the alkali content in the clinker, but also increased the Al2O3 content in the clinker, ensuring the easy burnability and high early strength of the clinker. Innovation has also been made in the raw material batching scheme, breaking the original high-grade and low-grade sandstones used together and changing them to separate batching of high-grade and low-grade sandstones respectively, thus avoiding the disadvantage of easy material segregation in the process of high-grade and low-grade sandstones used together. At the same time, the original four-component batching is changed to five-component batching, so that low-alkali clinker can be freely switched, which is convenient for production organization and production cost. On the basis of a series of innovative achievements, Daye Peak declared four invention patents in 2019: "a technology for producing clinker from gas sludge and dust collection in steel mills", "a method for treating sludge in machine-made sand mills", "an improvement in raw material batching method" and "a technology for producing low cement from iron ore mining waste soil", all of which have high practical value. (Fan Liangwu)

2020

07-31

Peak "Do not forget your initiative mind, Remember Mission" Theme Education Work Successfully Concluded

On January 14, the Party Committee of the Group Company held a summary meeting on the theme of "Do not forget your initiative mind, Keeping in mind the mission" to comprehensively summarize the progress and effectiveness of the theme education work, and on this basis further put forward the requirements for strengthening Party building. At this point, the theme education of "Do not forget your initiative mind, Keeping in Mind Mission" has been successfully concluded. Although according to the arrangement of the central government, the theme education of "Do not forget your initiative mind, Keeping in mind the mission" will start in September 2019, since the central government issued the relevant documents on the theme education of "Do not forget your initiative mind, Keeping in mind the mission", the Party committee of the group company has started to prepare in advance and organized and studied the spirit of General Secretary Xi Jinping's important speech on "Do not forget your initiative mind, Keeping in mind. Party organizations at all levels plan ahead and make full use of the "Peak News", publicity boards, party-mass activity rooms, WeChat public accounts and other media to carry out various forms of publicity to guide the majority of party members and cadres to deeply understand the important content and significance of the theme education. On June 29, the Party committee of the group company and the Party branch of Jiangbei sub branch of China Merchants Bank jointly organized party members and cadres to visit the old revolutionary base area of yinkeng village, Shafan Township, Jinhua. By reviewing the revolutionary history of the ancestors, studying the party history, reviewing the oath of joining the party, and strengthening the belief of striving for the party for the whole life, Further deeply understand the original intention and mission of seeking happiness for the Chinese people and rejuvenation of the Chinese nation. After the second batch of "Do not forget your initiative mind, Keeping in Mind Mission" thematic education officially started in September, the Party Committee of the Group Company held a thematic education arrangement meeting in a timely manner and set up a thematic education leader composed of Party Secretary Jiang Xiaomeng as the team leader and all Party committee members.

2020

07-31

City Red Cross thanks spike help "anti-epidemic"

On February 26, Jinhua City Red Cross Party Secretary, Executive Vice President Shi Yiwei and his entourage to visit the peak, the peak in the prevention and control of the new coronary pneumonia epidemic actively contribute to love, brave social responsibility of the great love and kindness to express gratitude. Jiang Xiaomeng, chairman of the group company, Huang Jinlong, deputy general manager of the group company and general manager of the pharmaceutical company, and Xiang Chongping, deputy general manager of the group company, had a discussion with Vice President Shi Yiwei and his party. In order to solve the difficult problems for caring enterprises to resume work and production, the Municipal Red Cross Society, based on its own functional positioning and giving full play to its unique advantages, conducted a large feedback and return visit to caring enterprises, and jointly established three Red Cross volunteer service teams, including traditional Chinese medicine service, psychological assistance, and emergency rescue training, to take "eight measures" to help caring enterprises resume work and production. Vice President Shi Yiwei led the backbone of three volunteer service teams to the peak for a return visit, expressing his gratitude for the contribution made by the peak in the prevention and control of the new coronary pneumonia epidemic, and sent a letter of thanks and the "New Coronary Pneumonia Prevention and Control Enterprises Resuming Work and Resuming Production Protection Manual". Chairman Jiang Xiaomeng introduced the industrial layout, production and operation of the peak, focusing on the resumption of work and production of the peak enterprises, and put forward opinions and suggestions on the reduction and exemption of basic electricity charges for enterprises, the support policies for small and medium-sized enterprises, and the payment of "five insurance and one fund. (Reporter Ni Yingzhen)

2020

07-30

City Red Cross thanks spike help "anti-epidemic"

2020

07-31

City Red Cross thanks spike help "anti-epidemic"

2020

07-31

< 1...25 26 27...61 > 跳转到页