Behind the Luck.
Release time:
2020-08-14
"Luck"
Artificial Bezoar Workshop Reconstruction Documentary
After four months of intense work, 8# September 9 , the artificial bezoar technical renovation project of Qiubin Factory was successfully completed, 8 18 , 19 , 20 , the trial production of the first three batches of products was successfully completed. Yi Shengrong, director of the Akihama Factory, lamented, "We are lucky this time".
Good luck, this is of course a joke. To do such a big project well, luck alone is of course not enough. What really plays a decisive role is the seriousness and hard work of the project team members.
Pharmaceutical Company has many years of successful experience in producing artificial bezoar, but from the beginning of the project transformation, due to the use of raw materials, production process, process standards, and production scale are almost different, so the previous experience is not for them. Help, can only be explored from scratch through the efforts of participating construction personnel. From the beginning of the
project, the project team was formed by Yi Shengrong, director of Qiubin Factory, Yu Chengfeng, production technology department, Yan Xixia, workshop director, Fang Weiming, mechanic, and Tang Songnian, electrician. While ensuring normal production, the project began to transform. The civil engineering project of workshop
started in March 4 . The project team members divided their work according to their own fields. Fang Weiming and Tang Songnian, who were responsible for equipment selection, went to many equipment manufacturers to understand relevant information, make comparisons and prepare for bidding. Compared with the previous production, the requirements for environmental protection are higher now. When designing the artificial bezoar workshop, it was decided to adopt dust-free transportation. All equipment is connected through pipelines. In order to meet this requirement, most equipment must be customized from the manufacturer. Before the formal bidding of the equipment, the project team also held a special meeting to brainstorm and put forward opinions and suggestions on equipment selection according to the collected information and their own work experience. It has been suggested that corn starch is one of the main raw materials for the production of artificial bezoar. A lot of heat will be generated during the ball milling process. If the temperature is too high, the starch will stick together and affect the quality of the product. Although there is no requirement for this in the process standard, it can be related to the quality of the product, so when selecting the equipment, the equipment manufacturer is required to increase the cooling system for the heat dissipation problem of the ball mill. Fang Weiming said that it takes three months for general equipment manufacturers to obtain orders and provide products, but we only have more than one month, and the equipment is not stereotyped, so the two sides have communicated repeatedly many times.
Despite this, there were still some small "episodes" in the acceptance stage before the equipment entered the site ". There is a gap between the inlet and outlet of the equipment and the previous requirements, which will cause waste of raw materials. But because the construction period is very tight, the time nodes of each link are very close, if you can not enter the site on time, the whole project will be affected. This can be anxious for the project team. After communication and arrangement, it was finally decided to give the equipment manufacturer a week to revise it. After meeting the required requirements, the equipment was pulled over quickly. Other minor problems can only be to let the equipment manufacturer personnel come over and make on-site modifications.
In the trial production stage, in order to save costs, Qiubin Factory decided that the batch of products is 100 kg, while the design capacity of the equipment is 500 kg. There is no data that can be directly referred to for the process parameters such as ball mill speed, ball milling time and ball quantity. Before the trial, the members of the project team also consulted relevant production enterprises, however, the other party has only tried batch 300 kg, and has not succeeded. There are more than ten kinds of trial production schemes involved in the three parameters. Time and cost are not allowed to try multiple schemes. We can only rely on the collection and selection of indirect experience collected by project team members from various channels, and finally confirm the formation of the scheme decided to put into production. The trial production was an unexpected success. All the indexes of the three batches of trial production products passed the test. Moreover, the color, the most difficult index to control for artificial bezoar, was highly recognized by the sales agent.
The implementation of the whole project is relatively smooth, and there may be elements of luck, but behind this "luck", only the participants know how much effort and hardship they have put in. Cleaning the workshop equipment happens to be the hottest time. The weather has been more than 40 degrees for more than half a month, which makes the project team members unable to bear it. The workshop that has just been renovated is very dusty, but in order to ensure the cleaning quality, the air conditioner cannot be turned on, so it can only be cleaned under high temperature. Once out of the workshop, the whole person seems to have been soaked in water, and none of his body is dry. Moreover, his body is covered with dust. If there is something to do in the production workshop, he has to change clothes first.
Yan Xixia was impressed by one thing. The proportion and amount of balls in the ball mill will directly affect the product quality. For this reason, the two employees put 4 alumina balls of different sizes, totaling 2 tons, into small baskets one by one, and poured them into the ball mill with their bare hands for testing. The ball mill is large in size, and the feed port is above the machine. Employees holding the ball have to walk on a platform more than two meters high before they can pour in. If the ratio is not right, it has to be poured out again, cleaned, dried, and then poured in baskets again. This data alone has been tried for 3. four days. It goes up and down dozens of times a day. It is completely a physical job. Sometimes my hands shake after work. And sometimes afraid of miscounting the number of balls, employees squat down directly one by one.
Not only that, during the entire construction period from 4 to 7 February, Yu Chengfeng, Fang Weiming and Tang Songnian did not rest for a day and gave up their holidays. As long as the construction unit was present, they would have to be there. Finally, even the number of overtime days was not counted.
The end of the three batches of trial production products does not mean the end of this technological transformation project. They have a more important task, that is, to apply for GMP certification, and are now preparing for relevant materials. (Reporter Ni Yingzhen)
More information
Recently, it was learned from the competent department that the "ERP/MES full-process informatization" project of Jianfeng Pharmaceutical Company has been included in the list of key projects of "integration of industrialization and industrialization" in Jinhua City, and has now entered the publicity period. In order to speed up the in-depth integration of informatization and industrialization, according to the evaluation criteria in Jinhua City's "Several Opinions on Accelerating Informatization Construction" and "Jinhua City Informatization and Industrialization Integration Key Project Management Measures", 148 projects were included in 2017 Jinhua City's "Integration of Industrialization and Industrialization" key projects. The "ERP/MES Full Process Informatization" project of Jianfeng Pharmaceutical Co., Ltd. was finally included in the list after being recommended, material reviewed and expert reviewed by Jinhua Economic and Information Committee. The ERP-level subsystems of ERP/MES full-process informatization project include sales system, procurement system, MRP system, GMPQbD system, connecting UFIDA financial software and HR system. MES-level subsystems include industrial data acquisition and monitoring system, GAMP/MES system, eBPR (electronic batch production record system), cGMP quality assurance system, QC/eBTR(QC process and electronic batch inspection record system), LIMS system, etc. After the construction is completed, the visualization of drug production process and the collection and integration of industrial data will be realized. Realize the electronization of drug production process parameters, electronic batch production and inspection records; the realization of big data integration of industrial data and information will also be in line with the regulatory concept of GMP data integrity and quality traceability to the greatest extent. The establishment of a unified enterprise information platform will eliminate information islands and realize data one.
2020
07-31
The company's first-half profit record high
According to the 15th meeting of the ninth board of directors of the company on August 25, in the first half of 2017, the company achieved a net profit of 240.5357 million yuan, the highest level in half a year's history. In the first half of 2017, the company focused on the general work policy of "grasping trends, precise development, strengthening management, and improving efficiency", grasping the opportunities brought by economic structure optimization and industrial upgrading, strengthening lean production and management improvement internally, and actively exploring externally Develop new opportunities and continue to promote the "three reductions and three improvements" work. Through the joint efforts of all employees of the company, the best semi-annual performance in history has been achieved. As of the end of June 2017, the company's total assets were 4.226 billion yuan and net assets were 2.511 billion yuan; the company achieved total operating income of 1,305.9327 million yuan, an increase of 18.42 percent over the same period last year, and net profit attributable to owners of the parent company was 240.5357 million yuan, an increase of 132.11 percent over the same period last year. Earnings per share are 0.7 yuan. In the second half of the year, the company will continue to focus on the annual business plan, carry out in-depth work of "three reductions and three improvements", further do a good job in internal control, prevent business risks, and further do a good job in safety and environmental protection. we will further develop and improve the complementary relatively diversified main business structure and constantly enhance the company's core competitiveness. The 15th meeting of the 9th board of directors held on August 25 was presided over by Jiang Xiaomeng, chairman of the group company. Four proposals and reports including the 2017 semi annual report and the proposal on the change of the company's accounting policy were deliberated and passed. on the same day, the 12th meeting of the eighth board of supervisors was held,
2020
07-31
General Manager Yu Jianhong to Yunnan Peak to Guide Work
On August 23, Yu Jianhong, general manager of the group company, went to Yunnan Jianfeng cement company for investigation and guidance, and put forward requirements for the key work in the last few months of this year. At the peak of Yunnan Province, Yu Jianhong went deep into the production site to learn more about the current production and operation situation, and convened the middle-level and above management backbones to have in-depth exchanges and discussions with everyone on the problems existing in work efficiency changes, personnel stability, current production and management after the implementation of post optimization and re-organization. Since the beginning of this year, Yunnan's peak production and sales volume, profits and various technological and technical indicators have been relatively ideal. The kiln output in April has also reached the best level since it was put into production. The development and maintenance of the market, the environmental management of the factory area, and the professional quality and mental state of cadres and workers have also been greatly improved. While fully affirming the above achievements, Yu Jianhong pointed out that as the homogenization of the cement market becomes more and more serious, the market changes faster and faster. If we can't recognize the situation and seize the opportunity, enterprises will face more and more problems. In this case, the management backbone should give full play to the role of the backbone, quickly change the management concept, and strive to improve the competitiveness of enterprises. In view of the focus of work in the last four months of this year, Yu Jianhong put forward the following requirements for Yunnan Jianfeng: break the inherent concept of post functions and responsibilities, set up posts and organizational structures around logistics, people flow and capital flow, and cultivate and forge a team that can fight well. To further implement the training of job skills and quality, managers should take the lead in strengthening their own learning and formulate annual, monthly and weekly training plans, through the combination of internal and external training, theory and practice.
2020
07-30
General Manager Yu Jianhong to Yunnan Peak to Guide Work
On August 23, Yu Jianhong, general manager of the group company, went to Yunnan Jianfeng cement company for investigation and guidance, and put forward requirements for the key work in the last few months of this year. At the peak of Yunnan Province, Yu Jianhong went deep into the production site to learn more about the current production and operation situation, and convened the middle-level and above management backbones to have in-depth exchanges and discussions with everyone on the problems existing in work efficiency changes, personnel stability, current production and management after the implementation of post optimization and re-organization. Since the beginning of this year, Yunnan's peak production and sales volume, profits and various technological and technical indicators have been relatively ideal. The kiln output in April has also reached the best level since it was put into production. The development and maintenance of the market, the environmental management of the factory area, and the professional quality and mental state of cadres and workers have also been greatly improved. While fully affirming the above achievements, Yu Jianhong pointed out that as the homogenization of the cement market becomes more and more serious, the market changes faster and faster. If we can't recognize the situation and seize the opportunity, enterprises will face more and more problems. In this case, the management backbone should give full play to the role of the backbone, quickly change the management concept, and strive to improve the competitiveness of enterprises. In view of the focus of work in the last four months of this year, Yu Jianhong put forward the following requirements for Yunnan Jianfeng: break the inherent concept of post functions and responsibilities, set up posts and organizational structures around logistics, people flow and capital flow, and cultivate and forge a team that can fight well. To further implement the training of job skills and quality, managers should take the lead in strengthening their own learning and formulate annual, monthly and weekly training plans, through the combination of internal and external training, theory and practice.
2020
07-31
Spike Pharmaceuticals set out to explore a new sales model
Agency and Terminal Link Production and Chain Cooperation Spike Pharmaceuticals to Explore New Sales Models From August 16 to 21, the 2017 China Pharmaceutical Retail Industry Information Conference (hereinafter referred to as "Xipu Conference") with the theme of "Building a Blueprint-Market Awakening Focusing on Demand" was held in Boao, Hainan. Huang Jinlong, deputy general manager of the group company and general manager of the pharmaceutical company, and relevant leaders of Spike Health, pharmaceutical sales company and Spike Pharma pharmacy were invited to attend the event, to create a new sales model "road". This year coincides with the 10th anniversary of the Western Conference. More than 1200 mainstream chain pharmacies, more than 800 brand pharmaceutical industries, more than 100 cross-border affiliated institutions, more than 130 top domestic and foreign capital institutions, more than 60 representatives of authoritative media, and authoritative experts in the industry, with nearly 4000 people gathered in Boao. The meeting combed the context of the pharmaceutical retail industry in the past ten years, discussed the development of the industry in the new decade, and built a new blueprint for the industry. During the meeting, Huang Jinlong led the peak participants to have in-depth exchanges with the organizers of the conference and industry experts on issues such as the impact of national policies such as the brand strategy of enterprises, the role of brand enterprises in the industry, medical reform, prescription outflow, etc. on the original sales mode of pharmaceutical enterprises. He also had extensive contact with pharmaceutical counterparts and terminal chains, listened to front-line sales experience, collected relevant information on terminal chains, and collected market trends of the top 100 chains. In the past ten years, the scale of drug retail sales in China has increased from 143 billion yuan to 337.7 billion yuan, and the chain rate has increased from 35.3 percent to 49.4 percent.
2020
07-31
General Manager Yu Jianhong to Yunnan Peak to Guide Work
On August 23, Yu Jianhong, general manager of the group company, went to Yunnan Jianfeng cement company for investigation and guidance, and put forward requirements for the key work in the last few months of this year. At the peak of Yunnan Province, Yu Jianhong went deep into the production site to learn more about the current production and operation situation, and convened the middle-level and above management backbones to have in-depth exchanges and discussions with everyone on the problems existing in work efficiency changes, personnel stability, current production and management after the implementation of post optimization and re-organization. Since the beginning of this year, Yunnan's peak production and sales volume, profits and various technological and technical indicators have been relatively ideal. The kiln output in April has also reached the best level since it was put into production. The development and maintenance of the market, the environmental management of the factory area, and the professional quality and mental state of cadres and workers have also been greatly improved. While fully affirming the above achievements, Yu Jianhong pointed out that as the homogenization of the cement market becomes more and more serious, the market changes faster and faster. If we can't recognize the situation and seize the opportunity, enterprises will face more and more problems. In this case, the management backbone should give full play to the role of the backbone, quickly change the management concept, and strive to improve the competitiveness of enterprises. In view of the focus of work in the last four months of this year, Yu Jianhong put forward the following requirements for Yunnan Jianfeng: break the inherent concept of post functions and responsibilities, set up posts and organizational structures around logistics, people flow and capital flow, and cultivate and forge a team that can fight well. To further implement the training of job skills and quality, managers should take the lead in strengthening their own learning and formulate annual, monthly and weekly training plans, through the combination of internal and external training, theory and practice.
2020
07-31
Contact Us
No. 88 Wujiang East Road, Jinhua City, Zhejiang Province, China
Tel: +86-579-82326868
Fax : +86-579-82324666
©2023 Zhejiang Jianfeng Group Co., Ltd. Powered by: www.300.cn SEO Business License
SAF Coolest v1.2 设置面板 SHJSS-AHDB-FSSQE-ZSW
无数据提示
Sorry, the current column has no content !
You can view other columns or return to Home Page