Behind the Luck.
Release time:
2020-08-14
"Luck"
Artificial Bezoar Workshop Reconstruction Documentary
After four months of intense work, 8# September 9 , the artificial bezoar technical renovation project of Qiubin Factory was successfully completed, 8 18 , 19 , 20 , the trial production of the first three batches of products was successfully completed. Yi Shengrong, director of the Akihama Factory, lamented, "We are lucky this time".
Good luck, this is of course a joke. To do such a big project well, luck alone is of course not enough. What really plays a decisive role is the seriousness and hard work of the project team members.
Pharmaceutical Company has many years of successful experience in producing artificial bezoar, but from the beginning of the project transformation, due to the use of raw materials, production process, process standards, and production scale are almost different, so the previous experience is not for them. Help, can only be explored from scratch through the efforts of participating construction personnel. From the beginning of the
project, the project team was formed by Yi Shengrong, director of Qiubin Factory, Yu Chengfeng, production technology department, Yan Xixia, workshop director, Fang Weiming, mechanic, and Tang Songnian, electrician. While ensuring normal production, the project began to transform. The civil engineering project of workshop
started in March 4 . The project team members divided their work according to their own fields. Fang Weiming and Tang Songnian, who were responsible for equipment selection, went to many equipment manufacturers to understand relevant information, make comparisons and prepare for bidding. Compared with the previous production, the requirements for environmental protection are higher now. When designing the artificial bezoar workshop, it was decided to adopt dust-free transportation. All equipment is connected through pipelines. In order to meet this requirement, most equipment must be customized from the manufacturer. Before the formal bidding of the equipment, the project team also held a special meeting to brainstorm and put forward opinions and suggestions on equipment selection according to the collected information and their own work experience. It has been suggested that corn starch is one of the main raw materials for the production of artificial bezoar. A lot of heat will be generated during the ball milling process. If the temperature is too high, the starch will stick together and affect the quality of the product. Although there is no requirement for this in the process standard, it can be related to the quality of the product, so when selecting the equipment, the equipment manufacturer is required to increase the cooling system for the heat dissipation problem of the ball mill. Fang Weiming said that it takes three months for general equipment manufacturers to obtain orders and provide products, but we only have more than one month, and the equipment is not stereotyped, so the two sides have communicated repeatedly many times.
Despite this, there were still some small "episodes" in the acceptance stage before the equipment entered the site ". There is a gap between the inlet and outlet of the equipment and the previous requirements, which will cause waste of raw materials. But because the construction period is very tight, the time nodes of each link are very close, if you can not enter the site on time, the whole project will be affected. This can be anxious for the project team. After communication and arrangement, it was finally decided to give the equipment manufacturer a week to revise it. After meeting the required requirements, the equipment was pulled over quickly. Other minor problems can only be to let the equipment manufacturer personnel come over and make on-site modifications.
In the trial production stage, in order to save costs, Qiubin Factory decided that the batch of products is 100 kg, while the design capacity of the equipment is 500 kg. There is no data that can be directly referred to for the process parameters such as ball mill speed, ball milling time and ball quantity. Before the trial, the members of the project team also consulted relevant production enterprises, however, the other party has only tried batch 300 kg, and has not succeeded. There are more than ten kinds of trial production schemes involved in the three parameters. Time and cost are not allowed to try multiple schemes. We can only rely on the collection and selection of indirect experience collected by project team members from various channels, and finally confirm the formation of the scheme decided to put into production. The trial production was an unexpected success. All the indexes of the three batches of trial production products passed the test. Moreover, the color, the most difficult index to control for artificial bezoar, was highly recognized by the sales agent.
The implementation of the whole project is relatively smooth, and there may be elements of luck, but behind this "luck", only the participants know how much effort and hardship they have put in. Cleaning the workshop equipment happens to be the hottest time. The weather has been more than 40 degrees for more than half a month, which makes the project team members unable to bear it. The workshop that has just been renovated is very dusty, but in order to ensure the cleaning quality, the air conditioner cannot be turned on, so it can only be cleaned under high temperature. Once out of the workshop, the whole person seems to have been soaked in water, and none of his body is dry. Moreover, his body is covered with dust. If there is something to do in the production workshop, he has to change clothes first.
Yan Xixia was impressed by one thing. The proportion and amount of balls in the ball mill will directly affect the product quality. For this reason, the two employees put 4 alumina balls of different sizes, totaling 2 tons, into small baskets one by one, and poured them into the ball mill with their bare hands for testing. The ball mill is large in size, and the feed port is above the machine. Employees holding the ball have to walk on a platform more than two meters high before they can pour in. If the ratio is not right, it has to be poured out again, cleaned, dried, and then poured in baskets again. This data alone has been tried for 3. four days. It goes up and down dozens of times a day. It is completely a physical job. Sometimes my hands shake after work. And sometimes afraid of miscounting the number of balls, employees squat down directly one by one.
Not only that, during the entire construction period from 4 to 7 February, Yu Chengfeng, Fang Weiming and Tang Songnian did not rest for a day and gave up their holidays. As long as the construction unit was present, they would have to be there. Finally, even the number of overtime days was not counted.
The end of the three batches of trial production products does not mean the end of this technological transformation project. They have a more important task, that is, to apply for GMP certification, and are now preparing for relevant materials. (Reporter Ni Yingzhen)
More information
On January 4, the Jinhua Federation of Industry and Commerce held the sixth member congress. Jiang Xiaomeng, chairman of the group company, was elected as the chairman of the Jinhua Federation of Industry and Commerce at the meeting, and served as 20 "2016 Xinyi Good Wu Merchants" One of the commendations from relevant departments. Jinhua city leaders Zhao Guangjun, and military and civilian, Huang Jinchao, Chen Xiao, Shao Guoqiang, Xu Zhangcai attended the opening ceremony of the conference. Zhao Guangjun, Secretary of the municipal Party committee, congratulated the convening of the conference on behalf of the four groups of the city. He hoped that the Federation of industry and Commerce at all levels and the majority of non-public economic personages would unify their thoughts and actions to the deployment requirements of the plenary session of the municipal Party committee, further strengthen their confidence, grasp the general trend, forge ahead, always maintain the correct political direction, firmly promote the development of non-public economy, and make greater contributions to the rise of Zhejiang. At this meeting, Jiang Xiaomeng, chairman of the group company, was elected as the new chairman of the Jinhua City Federation of Industry and Commerce. Jiang Xiaomeng said in his speech that the Federation of Industry and Commerce is a bridge and link between the party and the government to connect with people in the non-public economy, an assistant to the government in managing and serving the non-public economy, and an important window for the interests of the broad non-public economy. it represents the fundamental interests of the broad non-public economy. In the next five years, the new Federation of Industry and Commerce will continue to enhance cohesion and influence based on service; give full play to the role of "guidance" and "bridge", and always maintain sensitivity to the new situation with advanced awareness and long-term vision, and pay close attention to domestic and foreign Industrial development trends and economic development trends, timely discover new situations, study new problems, and act as a bridge between the government and enterprises
2020
07-31
Compilation of Three-year Operation Plan Completed
After many discussions and revisions, the three-year business plan compiled by the group's subordinate enterprises was finalized in early December and compiled into a book. In order to continuously improve the company's core competitiveness and sustainable development capabilities, the group company completed the company's five-year development plan in 2013 after many discussions, and clarified the development concept of "cooperative innovation to strengthen the main business, standardize science and seek development", Put forward the role of cement as a base player and be a cost leader in the regional market; medicine is guided by scientific and technological innovation and a market leader in segmented fields. And on this basis, the specific strategic objectives and development direction are formulated. In the second half of this year, on the basis of the pilot medium-and long-term economic responsibility system of the International Trade Company and Jinhua Pharmaceutical Company, the company requires each industrial sector to prepare its own three-year business plan. This is not only one of the actions to implement the strategic plan of the group company, but also an extension of the development strategy of the group company. After full discussion and revision, the current three-year business plan has been compiled into a book, which will become the work guide for the company's professional companies and directly affiliated enterprises in the future. The preparation of medium and long-term development plans, so that the company's managers at all levels more clear about the future direction of development, to be able to develop work objectives and work plans with a long-term vision, to avoid short-sighted behavior in management, the work of the enterprise to do fine, solid, detailed, and at the same time more fully and effectively mobilize the enthusiasm of personnel at all levels. The company requires subordinate enterprises to do a good job in the publicity and implementation of the "three-year business plan" of the enterprise, and in the annual work objectives
2020
07-31
Compilation of Three-year Operation Plan Completed
After many discussions and revisions, the three-year business plan compiled by the group's subordinate enterprises was finalized in early December and compiled into a book. In order to continuously improve the company's core competitiveness and sustainable development capabilities, the group company completed the company's five-year development plan in 2013 after many discussions, and clarified the development concept of "cooperative innovation to strengthen the main business, standardize science and seek development", Put forward the role of cement as a base player and be a cost leader in the regional market; medicine is guided by scientific and technological innovation and a market leader in segmented fields. And on this basis, the specific strategic objectives and development direction are formulated. In the second half of this year, on the basis of the pilot medium-and long-term economic responsibility system of the International Trade Company and Jinhua Pharmaceutical Company, the company requires each industrial sector to prepare its own three-year business plan. This is not only one of the actions to implement the strategic plan of the group company, but also an extension of the development strategy of the group company. After full discussion and revision, the current three-year business plan has been compiled into a book, which will become the work guide for the company's professional companies and directly affiliated enterprises in the future. The preparation of medium and long-term development plans, so that the company's managers at all levels more clear about the future direction of development, to be able to develop work objectives and work plans with a long-term vision, to avoid short-sighted behavior in management, the work of the enterprise to do fine, solid, detailed, and at the same time more fully and effectively mobilize the enthusiasm of personnel at all levels. The company requires subordinate enterprises to do a good job in the publicity and implementation of the "three-year business plan" of the enterprise, and in the annual work objectives
2020
07-31
Since the beginning of the 2016 qualification evaluation work of the group company in late November, it has been carried out in an orderly manner according to the established procedures. Compared with previous years, this year, according to the actual situation of the company, new cement plate job settings and development channels and other content. According to the provisions of the Company's Measures for the Administration of Staff Qualifications, the scope of application of the qualification assessment is for all employees of the Group's non-administrative position series, which is divided into three categories: management, technology and technical operation. Among them, the management and technical categories are divided into five grades, each with 2-4 grades; the mechanic operation category is divided into four grades, each with 2-4 grades. The Group Company establishes a qualification evaluation committee, which is responsible for guiding the evaluation of the qualifications of the Group Company, and conducting the evaluation of the qualifications of each department (office) of the Group Company and the qualifications of four levels and above within the scope of the Group Company; professional companies and directly affiliated enterprises establish an evaluation organization, which is responsible for the evaluation of the qualifications of the enterprise and subordinate enterprises at level 3 and below; the Human Resources Department of CNPC is responsible for organizing the review work and carrying out the transactional work of qualification management. Compared with previous years, the company has made a supplementary revision to the "Measures for the Administration of Employee Qualifications" this year, adding a "cement sector position setting and development channel", aiming at the actual situation and professional characteristics of the current two cement companies implementing job optimization, positions such as safety and environmental protection management, sales management, procurement, warehouse management, quality management, equipment maintenance (management), electrical maintenance (management), process operation, inspection workers, etc. are set up respectively, and different levels are divided, and corresponding evaluation standards are set. In accordance with the Management Measures, the post
2020
07-31
Compilation of Three-year Operation Plan Completed
After many discussions and revisions, the three-year business plan compiled by the group's subordinate enterprises was finalized in early December and compiled into a book. In order to continuously improve the company's core competitiveness and sustainable development capabilities, the group company completed the company's five-year development plan in 2013 after many discussions, and clarified the development concept of "cooperative innovation to strengthen the main business, standardize science and seek development", Put forward the role of cement as a base player and be a cost leader in the regional market; medicine is guided by scientific and technological innovation and a market leader in segmented fields. And on this basis, the specific strategic objectives and development direction are formulated. In the second half of this year, on the basis of the pilot medium-and long-term economic responsibility system of the International Trade Company and Jinhua Pharmaceutical Company, the company requires each industrial sector to prepare its own three-year business plan. This is not only one of the actions to implement the strategic plan of the group company, but also an extension of the development strategy of the group company. After full discussion and revision, the current three-year business plan has been compiled into a book, which will become the work guide for the company's professional companies and directly affiliated enterprises in the future. The preparation of medium and long-term development plans, so that the company's managers at all levels more clear about the future direction of development, to be able to develop work objectives and work plans with a long-term vision, to avoid short-sighted behavior in management, the work of the enterprise to do fine, solid, detailed, and at the same time more fully and effectively mobilize the enthusiasm of personnel at all levels. The company requires subordinate enterprises to do a good job in the publicity and implementation of the "three-year business plan" of the enterprise, and in the annual work objectives
2020
07-30
"Peak" was identified as China's well-known trademark
Recently, the Trademark Office of the State Administration for Industry and Commerce issued a document that the "Jianfeng" trademark held by Jianfeng Pharmaceutical Company was recognized as a well-known trademark. The main contents of the "Reply of the Trademark Office of the State Administration for Industry and Commerce on the Identification of" Jianfeng "Trademark as a Well-known Trademark" (Shang Standard Chi Zi [2016] No. 121) are as follows: according to the relevant provisions of the Trademark Law, the regulations for the implementation of the Trademark Law and the provisions on the identification and protection of well-known trademarks, after examination and research, it is recognized that the registered trademark of "Jianfeng" used by Zhejiang Jianfeng Pharmaceutical Co., Ltd. in category 5 of the International Classification of Goods and Services for Trademark Registration is a well-known trademark. The identification of the well-known trademark has effectively enhanced the brand value of the company, helped to improve the popularity of the company's products, and further strengthened the protection of the "peak" trademark. (Zhou Hengbin) News link: "well-known trademark" (Well-knownTradeMark), also known as well-known trademark, first appeared in the Paris Convention for the Protection of Industrial property signed in 1883. According to international and domestic intellectual property laws and regulations, the well-known trademark system is created to fully protect the legitimate rights and interests of well-known trademark owners. Its purpose is to reasonably protect the relevant trademark ownership, maintain fair competition, and stop infringement of others' trademark exclusive rights. behavior. China joined the Convention in 1984, according to the provisions of the Convention to give special legal protection to well-known trademarks, has become an important part of China's trademark legal work. Well-known trademarks in China (ChinaFam
2020
07-31