Make safety a habit.
Release time:
2020-08-14
Make safety a habit
Open the news or newspaper, and you can often see reports of safety accidents. In our company, unsafe behaviors, large and small, are not uncommon, such as irregular wearing of safety helmets, smoking in no-smoking areas, drinking to work... Some people always think that accidents are far away from them, and when they happen, they regret it.
Hidden dangers are fiercer than tigers, life is greater than days, and ideological inattention to safety is even more hidden dangers. General Secretary Xi Jinping has repeatedly made instructions, pointing out that safe production is an insurmountable "red line". Accidents occur frequently. Although the specific reasons are different, the hidden safety hazards exposed behind them are not without commonality. The fundamental reason is that the safety awareness is not strong, the carelessness and the fluke. If we do not attach importance to it ideologically, then the implementation of other work in place can only be empty talk, which is the biggest security risk and should not be underestimated.
At present, the safety facilities of enterprises have been reviewed by "three simultaneity". The safety system and safety operation procedures are relatively standardized. At the beginning of the year, safety responsibility letters were signed layer by layer, with clear responsibilities in black and white. Government regulatory departments often carry out inspections in a "four-no-two-straight" manner, but accidents still occur frequently. Putting aside the theory of the cause of the accident, after all, the safety concept of safety first and life first has not been formed, the habit of safe behavior has not been formed, and the bloody accident lessons have not been learned. Some people say that the life of this person is not good, and some people will say that this happened by accident, it is definitely an accident. From the accident investigation reports, we can not analyze the indirect causes without this sentence: safety training is not in place, safety awareness is weak. All the new employees of the company have received three-level safety education in the factory, and the management usually blows the wind of paying attention to safe production in the ears of the employees. However, there are always some employees who think that this is a form, go through the motions, and deal with superior inspections, which are ordered by the leaders. It is always believed that the enterprise wants employees to be safe and the government requires employees to be safe. I always feel that minor problems continue, and major problems are not committed, but I can also be safe. I always think that if there is a small hidden danger, there will be no accident.
DuPont's safety culture, the core point is "unsafe things absolutely do not do", and the formation of everyone talk about safety, everyone will be safe, everyone for the safety of the atmosphere. "I don't hurt myself, I don't hurt others, I don't hurt others". Safety first cannot be an empty word. The concept of safety should be deeply implanted in our heads and good behavior habits should be formed.
Safety in production depends on strictness and leniency. For this reason, I suggest that we should form our own safety production culture of Jianfeng Group. Gradually approach intrinsic safety through the establishment of safety standardization; Do a good job in systematic investigation and management of potential safety hazards and zero tolerance for potential hazards; Do a good job in systematic staff should know and train, so that each employee knows the safety risk factors of his post, does a good job in safety prevention and control measures, and will deal with emergencies. Management should pay attention to the implementation of responsibility and assessment of rewards and punishment, say "no" to any unsafe behavior and make safety a habit.
"for the unknown, for the unknown, for the unknown, for the unknown". Safety in production is a matter of vital importance to human life. Only by discovering and solving the hidden dangers of problems first can we prevent them from getting worse, minimize safety accidents and avoid tragedies as much as possible. Safety is the premise of happiness in life and the foundation of enterprise development. Let us work together, promote each other, build a solid line of defense in production safety in thought and action, and form good behavior habits as soon as possible. Climb higher spikes for safety escort. (Wang Fen, Jinxi Pharmaceutical Factory, Pharmaceutical Company)
More information
Jiang Xiaomeng Yunnan Jianfeng Lectures on Party Lessons
In order to implement the requirements of the higher-level party committee secretary to give in-depth party lectures in enterprises, on July 4, Jiang Xiaomeng, secretary of the party committee and chairman of the group company, gave a special lecture on "two studies and one doing" for party members at Yunnan Jianfeng Cement Company. In the lecture, Jiang Xiaomeng started from the background, overall requirements, learning and education content, and main measures of the "two studies and one doing" activities. He hoped that all party members and cadres would understand "awe, gratitude, humility, and decent", and put forward "What should the current enterprise do" and "How should the enterprise go in the future" and other issues. Jiang Xiaomeng analyzed the future development trend of cement and pharmaceutical industries in detail, emphasized the importance of seizing opportunities, and pointed out that with the homogenization of cement industry becoming more and more serious, if we want to take the road of differentiated brand development, the core of competition is to strengthen self management and maximize the cost, so as to improve the competitive advantage. As far as Yunnan Jianfeng is concerned, it is necessary to continuously improve the level of process technology management and increase the hourly output by increasing inspection efforts. Starting from strengthening the control of raw material procurement, the quality and price should be controlled. By strengthening sales management, vigorously develop direct agents, and strive to maximize the profit per ton; By strengthening equipment maintenance, reduce equipment accidents and further reduce the consumption of machine materials; Make good use of people, while constantly tapping talents and cultivating new people, we will gradually control the total number of workers and improve labor productivity. According to the current situation and the company's development strategy, what should the party members of the peak do? Jiang Xiaomeng asked all the party members and cadres of Yunnan peak to play a good vanguard and exemplary role and take the lead in learning new knowledge, new technology and new experience.
2020
07-30
Yunnan Peak Starts Secondary Security Standardization Creation
On June 19, Yunnan Jianfeng cement company held a mobilization meeting to further implement the requirements of the State Council, Yunnan Province, Pu'er City and Simao District Safety Supervision Bureau on carrying out safety production standardization work, and deploy the secondary safety standardization work. At the meeting, Liu Shenghua, deputy general manager of Yunnan Jianfeng, read out the requirements and work arrangements for creating a secondary enterprise for safety production standardization. The representative of Yunnan superstar Safety Technology Service Co., Ltd., the evaluation unit of safety production standardization, explained in detail the relevant knowledge of safety production standardization consultation and evaluation for the participants, and explained the requirements, standards and other elements of safety production standardization work. Zhou Jiping, general manager of Yunnan Jianfeng, mobilized the establishment of secondary safety production standardization at the meeting, requiring all workshops and departments to prepare and report the data before the end of October, and both software and hardware meet the acceptance conditions, so as to complete the bid creation work by the end of the year. Through the mobilization meeting, the responsible persons of Yunnan Jianfeng and superstar companies and relevant personnel had in-depth exchanges, further unified their thinking, and improved Yunnan Jianfeng employees' understanding of safety production standardization. Everyone recognizes that carrying out safety production standardization work is not only to implement the spirit of a series of documents of the party and the country, but also a mandatory requirement of the government for enterprises, and it is also the need for the sustainable and healthy development of enterprises themselves. Through the development of safety production standardization, enterprises can be promoted to establish and improve the safety production responsibility system, improve the safety production management system, standardize the production operation behavior, investigate and control the hidden dangers of accidents, effectively control the sources of danger, make the production equipment and facilities meet the safety standards, and continuously improve
2020
07-31
Yunnan Peak Starts Secondary Security Standardization Creation
On June 19, Yunnan Jianfeng cement company held a mobilization meeting to further implement the requirements of the State Council, Yunnan Province, Pu'er City and Simao District Safety Supervision Bureau on carrying out safety production standardization work, and deploy the secondary safety standardization work. At the meeting, Liu Shenghua, deputy general manager of Yunnan Jianfeng, read out the requirements and work arrangements for creating a secondary enterprise for safety production standardization. The representative of Yunnan superstar Safety Technology Service Co., Ltd., the evaluation unit of safety production standardization, explained in detail the relevant knowledge of safety production standardization consultation and evaluation for the participants, and explained the requirements, standards and other elements of safety production standardization work. Zhou Jiping, general manager of Yunnan Jianfeng, mobilized the establishment of secondary safety production standardization at the meeting, requiring all workshops and departments to prepare and report the data before the end of October, and both software and hardware meet the acceptance conditions, so as to complete the bid creation work by the end of the year. Through the mobilization meeting, the responsible persons of Yunnan Jianfeng and superstar companies and relevant personnel had in-depth exchanges, further unified their thinking, and improved Yunnan Jianfeng employees' understanding of safety production standardization. Everyone recognizes that carrying out safety production standardization work is not only to implement the spirit of a series of documents of the party and the country, but also a mandatory requirement of the government for enterprises, and it is also the need for the sustainable and healthy development of enterprises themselves. Through the development of safety production standardization, enterprises can be promoted to establish and improve the safety production responsibility system, improve the safety production management system, standardize the production operation behavior, investigate and control the hidden dangers of accidents, effectively control the sources of danger, make the production equipment and facilities meet the safety standards, and continuously improve
2020
07-31
Yunnan Peak Starts Secondary Security Standardization Creation
On June 19, Yunnan Jianfeng cement company held a mobilization meeting to further implement the requirements of the State Council, Yunnan Province, Pu'er City and Simao District Safety Supervision Bureau on carrying out safety production standardization work, and deploy the secondary safety standardization work. At the meeting, Liu Shenghua, deputy general manager of Yunnan Jianfeng, read out the requirements and work arrangements for creating a secondary enterprise for safety production standardization. The representative of Yunnan superstar Safety Technology Service Co., Ltd., the evaluation unit of safety production standardization, explained in detail the relevant knowledge of safety production standardization consultation and evaluation for the participants, and explained the requirements, standards and other elements of safety production standardization work. Zhou Jiping, general manager of Yunnan Jianfeng, mobilized the establishment of secondary safety production standardization at the meeting, requiring all workshops and departments to prepare and report the data before the end of October, and both software and hardware meet the acceptance conditions, so as to complete the bid creation work by the end of the year. Through the mobilization meeting, the responsible persons of Yunnan Jianfeng and superstar companies and relevant personnel had in-depth exchanges, further unified their thinking, and improved Yunnan Jianfeng employees' understanding of safety production standardization. Everyone recognizes that carrying out safety production standardization work is not only to implement the spirit of a series of documents of the party and the country, but also a mandatory requirement of the government for enterprises, and it is also the need for the sustainable and healthy development of enterprises themselves. Through the development of safety production standardization, enterprises can be promoted to establish and improve the safety production responsibility system, improve the safety production management system, standardize the production operation behavior, investigate and control the hidden dangers of accidents, effectively control the sources of danger, make the production equipment and facilities meet the safety standards, and continuously improve
2020
07-30
The Company shall organize special operation safety management training
What kind of management process is needed for the special operation permit? How to manage the ticket of the special operation permit? What are the contents of the eight kinds of special operations?... On June 17, the safety committee of the group company organized a special lecture on safety production to conduct systematic and comprehensive training on the safety management knowledge of special operations. The trainer invited for this training is Ge Zhengliang, head of EHS (Environmental Environment, Health Health, Safety) of Zhejiang Prodbang Pharmaceutical Co., Ltd. He has many years of experience in enterprise safety production management and is also a well-known safety management expert in Jinhua region. He has participated in the enterprise safety and environmental protection inspection organized by Jinhua Safety Supervision Bureau for many times and has a certain understanding of the situation of major enterprises in the peak. In this lecture, Ge Zhengliang divided into four parts: division of special operation license scope, special operation license management process, special operation license ticket management, and eight major types of special operation contents. Combined with relevant laws and regulations and his own practical experience in safety production management, Ge Zhengliang explained in simple terms eight special operation situations such as hot work, hoisting, high place, temporary power consumption, open circuit, blind plate plugging, restricted space, etc, standardize the licensed business division, approval department, the places to be paid attention to in the approval management of each type of operation, the responsibilities of the relevant approval department, the matters needing attention in on-site operation, the approval process, ticket management and other knowledge, and make a detailed description of the relevant special operation contents according to the working characteristics of peak subordinate enterprises. In addition, he also shared the experience of special operation safety management of Plo Pharmaceutical.
2020
07-31
Yunnan Jianfeng won the honor of "key leading enterprise in Pu'er City"
Recently, Yunnan Jianfeng Cement Company was awarded the honorary title of "2016 Pu'er Key Leading Enterprise" by the Pu'er Municipal Party Committee and Municipal Government. In recent years, according to the requirements of the group company's "three reductions and three improvements", Yunnan Jianfeng has focused on internal management and external market expansion, tried every means to reduce costs in production, timely controlled market trends in sales, and constantly refreshed various business indicators. While striving to create its own brand value, Yunnan Jianfeng always regards giving back to the society and serving local development as its own responsibility and obligation. Since the establishment of the company, Yunnan Jianfeng has actively responded to the government's call to support the construction of poor border areas and provide free cement to some poor people. Support the education construction in border areas and donate funds for students in need. At the same time, it has paid various taxes and fees on time in accordance with the law and has become a major profit and tax producer in Pu'er City for years. It has gradually grown from a new cement enterprise in Pu'er area to a leading enterprise in the cement industry. The honor of "key leading enterprises in Pu'er City in 2016" is the affirmation and recognition of Yunnan Jianfeng's work over the past few years by the local government and society. During the "Thirteenth Five-Year Plan" period, southwestern Yunnan is about to usher in an explosive stage of development. The construction of international railway projects, the construction of border expressway projects, the construction of airport projects and the construction of people's livelihood projects will all start this year. The acquisition of the honorary title of "Key Leading Enterprise in Pu'er City in 2016" will also provide strong support for Yunnan Jianfeng to strive for the right to supply these projects. (Li Yun)
2020
07-31