Wang Junyang: I am a young man
Release time:
2020-08-14
Wang Junyang: I am a young man
. When I pass through the office of the preparation workshop of Qiubin Factory, I can often see a young man with glasses sitting at his desk, bowing his head and busy. Say hello to him and he will look up at you with a smile. He is Wang Junyang, a craftsman in the preparation workshop. When talking with him, he said the most, "I am a young man."
In 2014 , Wang Junyang graduated from University and entered Jianfeng Pharmaceutical. He said that because he was not majoring in pharmaceuticals, when he first joined the company, he didn't know anything, so he could only "gnaw" with thick professional books all day long, effectively combining the knowledge learned in school with the practice of the enterprise, and adapt to the new environment as soon as possible.
2014 was catching up with the technical renovation of the large and small capacity injection production lines in Qiubin Factory. The leader assigned Wang Junyang to assist in the verification work. The two production lines are technically reformed at the same time, writing post SOP , equipment installation and debugging, trial production, product approval, etc. All links cannot be separated from verification work, with heavy workload and long cycle. Wang Junyang has not fully recovered from the school life and learning state, he has already devoted himself to his busy work.
Work is not only tiring, but also hungry sometimes, which is unexpected in Wang Junyang. Once, the leader asked him to write SOP for a new device. In the process of writing, he found that there was a parameter of wind speed that had not been set. He found the manufacturer's debugger, Master Fang, and asked him that it could be set up temporarily, so he ran after Master Fang for several hours. When the parameters were set, it was already over 8 o'clock in the evening, and my stomach was already growling with hunger. Wang Junyang was in a hurry to calculate other data related to this parameter without having dinner. When he finished work, it was already 10:30 at night, and he rode home for more than an hour. He was tired and could not feel hungry. He was so tired that he fell asleep in bed. But despite being so busy and tired, he never thought of giving up. He said that this job is not easy to come by, and if you want to do it, you have to do it like that.
In the technical transformation and verification of the two production lines, Wang Junyang has a new understanding of the word "communication". In addition to asking questions frequently, he must take notes and think frequently, so as to leave a deep impression. impression. The technical transformation of the two production lines has also introduced many new equipment. In order to better understand and be familiar with the performance of the new equipment, he actively communicated with operators, manufacturers debugging personnel, and machine repair personnel to strengthen understanding. After the technological transformation, each post SOP must be upgraded according to the requirements of the new version GMP . In order to better complete the work, he constantly discussed with the deputy production director, workshop director and QA , studying and working.
As a craftsman in the preparation workshop, Wang Junyang always does not relax the inspection of the production line and strictly controls the product quality. He said that if the inspection is relaxed, the product quality will be unqualified and the whole batch of products will be scrapped. In order to avoid unnecessary losses, before each production, he has to go to each post of the production line to check carefully whether there are any remnants of the previous batch, and report to the workshop director to release the production. When feeding, check and control the feeding amount and content, and timely transmit the test results to the post operators so that filling can be carried out in time; during production, check the non-standard behaviors on the production line, such as whether the production personnel are dressed neatly and in a standard manner, whether gloves and hats have been put on, whether they move frequently, etc. As long as there are non-standard behaviors, he will point out in time and require changes. During the operation, if there is a bottle stuck phenomenon, know the situation in time and solve it in time. After the end of the production, check the clearance situation, to see whether the production equipment is neatly placed, small tools are put back in place, and remind the staff to standardize the operation...
Wang Junyang's serious and responsible, studious and progressive work attitude has been recognized and praised by leaders and colleagues. After being named 2016 "rookie employee" of the group company, when everyone asked him what his acceptance speech was, he said shyly, excited! I'm still young, come on! (Hong Zhiwei)
More information
Publicity of Environmental Protection Acceptance for Completion of Kiln End Flue Gas Desulfurization Project of daye peak cement co., ltd. According to the requirements of the Interim Measures for Environmental Protection Acceptance for Completion of Construction Projects (No.4 [2017] of the State Environmental Regulations) issued by the Ministry of Environmental Protection, the environmental protection acceptance information of "Kiln End Flue Gas Desulfurization Project" of daye peak cement co., ltd. is now publicized. Basic Information of 1. Project Project Name: Kiln End Flue Gas Desulfurization Project Construction Unit: daye Jianfeng Cement Co., Ltd. Project Construction Location: Yongguang Village, Baoan Town, daye city, nature of the project in the existing plant area of daye Jianfeng Cement Co., Ltd.: The construction content of the technological transformation project is: This technological transformation project is mainly to build a wet desulfurization system for kiln end gas of the company's existing 4000t cement clinker production line, adopting limestone-gypsum wet flue gas desulfurization process. The project covers a total area of 500 m2, with a new construction area of about 450 m2. It mainly builds desulfurization complex building, flue gas system, SO2 absorption system, limestone powder conveying and limestone slurry preparation system, process water system, gypsum dehydration system and supporting pipelines. Power supply, water supply, compressed air and other public works rely on the existing plant. Total investment and environmental protection investment: the total investment of the project is 10.37 million yuan, all of which are environmental protection investment. The project was entrusted to Huangshi Yangtze River Environmental Engineering Design and Research Institute to carry out environmental impact assessment in September 2017. On November 16, 2017, Daye Municipal Environmental Protection Bureau issued a reply with YEHAN [2017] No. 354. Implementation of 2. environmental protection measures The scope of this acceptance is the flue gas desulfurization system and supporting facilities at the end of the kiln. (1) Exhaust gas pollution
2020
07-31
Spike New Drug Approved for Registration
On April 16, Jianfeng Pharmaceutical Company received the approval and issuance of Olopatadine Hydrochloride Eye Drops "Drug Registration Approval" (approval number: 2019S00296) approved by the State Drug Administration. Olopatadine hydrochloride eye drops is mainly used to treat the signs and symptoms of allergic conjunctivitis. It is a mast cell stabilizer and a relatively selective histamine H1-receptor antagonist. It can inhibit type I immediate allergic reactions in vivo and in vitro experiments. At present, the product has been included in the "National Basic Medical Insurance, Work Injury Insurance and Maternity Insurance Drug Catalog (2017 Edition)" and classified as Class B. According to the relevant data of IMS database, in 2018, the global sales of olopatadine hydrochloride eye drops were about 0.37 billion US dollars, and the sales in China were about 10.232 million US dollars. Spike Pharmaceuticals already has the corresponding production line, this time to obtain the registration approval, marking Spike Pharmaceuticals has the qualification to carry out the production and sales of olopatadine hydrochloride eye drops, will further enrich the product line of Spike Pharmaceuticals, help to enhance the competitiveness of the company's pharmaceutical business. (Xia Yingpin)
2020
07-31
Spike New Drug Approved for Registration
On April 16, Jianfeng Pharmaceutical Company received the approval and issuance of Olopatadine Hydrochloride Eye Drops "Drug Registration Approval" (approval number: 2019S00296) approved by the State Drug Administration. Olopatadine hydrochloride eye drops is mainly used to treat the signs and symptoms of allergic conjunctivitis. It is a mast cell stabilizer and a relatively selective histamine H1-receptor antagonist. It can inhibit type I immediate allergic reactions in vivo and in vitro experiments. At present, the product has been included in the "National Basic Medical Insurance, Work Injury Insurance and Maternity Insurance Drug Catalog (2017 Edition)" and classified as Class B. According to the relevant data of IMS database, in 2018, the global sales of olopatadine hydrochloride eye drops were about 0.37 billion US dollars, and the sales in China were about 10.232 million US dollars. Spike Pharmaceuticals already has the corresponding production line, this time to obtain the registration approval, marking Spike Pharmaceuticals has the qualification to carry out the production and sales of olopatadine hydrochloride eye drops, will further enrich the product line of Spike Pharmaceuticals, help to enhance the competitiveness of the company's pharmaceutical business. (Xia Yingpin)
2020
07-31
Contact Us
No. 88 Wujiang East Road, Jinhua City, Zhejiang Province, China
Tel: +86-579-82326868
Fax : +86-579-82324666
©2023 Zhejiang Jianfeng Group Co., Ltd. Powered by: www.300.cn SEO Business License
SAF Coolest v1.2 设置面板 SHJSS-AHDB-FSSQE-ZSW
无数据提示
Sorry, the current column has no content !
You can view other columns or return to Home Page