Wang Junyang: I am a young man
Release time:
2020-08-14
Wang Junyang: I am a young man
. When I pass through the office of the preparation workshop of Qiubin Factory, I can often see a young man with glasses sitting at his desk, bowing his head and busy. Say hello to him and he will look up at you with a smile. He is Wang Junyang, a craftsman in the preparation workshop. When talking with him, he said the most, "I am a young man."
In 2014 , Wang Junyang graduated from University and entered Jianfeng Pharmaceutical. He said that because he was not majoring in pharmaceuticals, when he first joined the company, he didn't know anything, so he could only "gnaw" with thick professional books all day long, effectively combining the knowledge learned in school with the practice of the enterprise, and adapt to the new environment as soon as possible.
2014 was catching up with the technical renovation of the large and small capacity injection production lines in Qiubin Factory. The leader assigned Wang Junyang to assist in the verification work. The two production lines are technically reformed at the same time, writing post SOP , equipment installation and debugging, trial production, product approval, etc. All links cannot be separated from verification work, with heavy workload and long cycle. Wang Junyang has not fully recovered from the school life and learning state, he has already devoted himself to his busy work.
Work is not only tiring, but also hungry sometimes, which is unexpected in Wang Junyang. Once, the leader asked him to write SOP for a new device. In the process of writing, he found that there was a parameter of wind speed that had not been set. He found the manufacturer's debugger, Master Fang, and asked him that it could be set up temporarily, so he ran after Master Fang for several hours. When the parameters were set, it was already over 8 o'clock in the evening, and my stomach was already growling with hunger. Wang Junyang was in a hurry to calculate other data related to this parameter without having dinner. When he finished work, it was already 10:30 at night, and he rode home for more than an hour. He was tired and could not feel hungry. He was so tired that he fell asleep in bed. But despite being so busy and tired, he never thought of giving up. He said that this job is not easy to come by, and if you want to do it, you have to do it like that.
In the technical transformation and verification of the two production lines, Wang Junyang has a new understanding of the word "communication". In addition to asking questions frequently, he must take notes and think frequently, so as to leave a deep impression. impression. The technical transformation of the two production lines has also introduced many new equipment. In order to better understand and be familiar with the performance of the new equipment, he actively communicated with operators, manufacturers debugging personnel, and machine repair personnel to strengthen understanding. After the technological transformation, each post SOP must be upgraded according to the requirements of the new version GMP . In order to better complete the work, he constantly discussed with the deputy production director, workshop director and QA , studying and working.
As a craftsman in the preparation workshop, Wang Junyang always does not relax the inspection of the production line and strictly controls the product quality. He said that if the inspection is relaxed, the product quality will be unqualified and the whole batch of products will be scrapped. In order to avoid unnecessary losses, before each production, he has to go to each post of the production line to check carefully whether there are any remnants of the previous batch, and report to the workshop director to release the production. When feeding, check and control the feeding amount and content, and timely transmit the test results to the post operators so that filling can be carried out in time; during production, check the non-standard behaviors on the production line, such as whether the production personnel are dressed neatly and in a standard manner, whether gloves and hats have been put on, whether they move frequently, etc. As long as there are non-standard behaviors, he will point out in time and require changes. During the operation, if there is a bottle stuck phenomenon, know the situation in time and solve it in time. After the end of the production, check the clearance situation, to see whether the production equipment is neatly placed, small tools are put back in place, and remind the staff to standardize the operation...
Wang Junyang's serious and responsible, studious and progressive work attitude has been recognized and praised by leaders and colleagues. After being named 2016 "rookie employee" of the group company, when everyone asked him what his acceptance speech was, he said shyly, excited! I'm still young, come on! (Hong Zhiwei)
More information
Peak re-listed China's top 100 cement production capacity Daye peak won the "smart factory leader"
On July 11-12, the 2022 China Cement Industry Summit and TOP100 Award Ceremony organized by China Cement Network, an authoritative media of China's cement industry, was held in Hangzhou. Jianfeng Group once again ranked among the top 100 cement clinker production capacity in China.
2022
08-04
On the afternoon of July 12, the party Committee of the group company held a special meeting attended by party Committee members, senior and middle-level management backbones, heads of grass-roots party organizations and all party members of the group headquarters to learn and convey the spirit of the 15th party congress of the communist party of China in Zhejiang province.
2022
07-24
On the morning of July 1, more than 40 members of the group's party committee, party members of various branches of the group headquarters, and party members of subordinate enterprise branches went to the Shuanglong Hydropower Station, the Red Education Base of Jinhua City, to receive party spirit and revolutionary tradition education.
2022
07-14
Vocational skill level identification examination!
On June 16 and 18, the theoretical and practical examinations for the determination of professional skill level in the peak pharmaceutical sector were held successively in Jinxi pharmaceutical factory. The independent identification of vocational skill level includes three occupations (types of work): pharmaceutical preparation worker, chemical inspector and organic synthesis worker, basically covering the main posts in the pharmaceutical sector, with a total of 125 employees signing up for the identification.
2022
06-21
On June 16, the Jianfeng Pharmaceutical Quality Research and Development Party Branch and the Jinhua Vocational Skills Management Service Center Party Branch held a signing ceremony in Jinxi Factory to establish a party building alliance.
2022
06-21
Jinhua Mayor Xing Zhihong to Peak Research
On the afternoon of June 1, Jinhua Mayor Xing Zhihong, Wucheng District Party Committee Secretary Gao Feng, District Mayor Hu Yuxian, and heads of the Municipal Economic and Information Bureau, Development and Reform Bureau and other departments went to the group headquarters to discuss and exchange with the leaders of the group company to understand the development of the enterprise. Solicit opinions and suggestions from enterprises on government work. After understanding the current business situation of the peak, Xing Zhihong pointed out that focus, follow the right path, frontier, steady, is the peak to long-term prosperity of the magic weapon, must continue to adhere.
2022
06-13
Contact Us
No. 88 Wujiang East Road, Jinhua City, Zhejiang Province, China
Tel: +86-579-82326868
Fax : +86-579-82324666
©2023 Zhejiang Jianfeng Group Co., Ltd. Powered by: www.300.cn SEO Business License
SAF Coolest v1.2 设置面板 SHJSS-AHDB-FSSQE-ZSW
无数据提示
Sorry, the current column has no content !
You can view other columns or return to Home Page