Wang Junyang: I am a young man
Release time:
2020-08-14
Wang Junyang: I am a young man
. When I pass through the office of the preparation workshop of Qiubin Factory, I can often see a young man with glasses sitting at his desk, bowing his head and busy. Say hello to him and he will look up at you with a smile. He is Wang Junyang, a craftsman in the preparation workshop. When talking with him, he said the most, "I am a young man."
In 2014 , Wang Junyang graduated from University and entered Jianfeng Pharmaceutical. He said that because he was not majoring in pharmaceuticals, when he first joined the company, he didn't know anything, so he could only "gnaw" with thick professional books all day long, effectively combining the knowledge learned in school with the practice of the enterprise, and adapt to the new environment as soon as possible.
2014 was catching up with the technical renovation of the large and small capacity injection production lines in Qiubin Factory. The leader assigned Wang Junyang to assist in the verification work. The two production lines are technically reformed at the same time, writing post SOP , equipment installation and debugging, trial production, product approval, etc. All links cannot be separated from verification work, with heavy workload and long cycle. Wang Junyang has not fully recovered from the school life and learning state, he has already devoted himself to his busy work.
Work is not only tiring, but also hungry sometimes, which is unexpected in Wang Junyang. Once, the leader asked him to write SOP for a new device. In the process of writing, he found that there was a parameter of wind speed that had not been set. He found the manufacturer's debugger, Master Fang, and asked him that it could be set up temporarily, so he ran after Master Fang for several hours. When the parameters were set, it was already over 8 o'clock in the evening, and my stomach was already growling with hunger. Wang Junyang was in a hurry to calculate other data related to this parameter without having dinner. When he finished work, it was already 10:30 at night, and he rode home for more than an hour. He was tired and could not feel hungry. He was so tired that he fell asleep in bed. But despite being so busy and tired, he never thought of giving up. He said that this job is not easy to come by, and if you want to do it, you have to do it like that.
In the technical transformation and verification of the two production lines, Wang Junyang has a new understanding of the word "communication". In addition to asking questions frequently, he must take notes and think frequently, so as to leave a deep impression. impression. The technical transformation of the two production lines has also introduced many new equipment. In order to better understand and be familiar with the performance of the new equipment, he actively communicated with operators, manufacturers debugging personnel, and machine repair personnel to strengthen understanding. After the technological transformation, each post SOP must be upgraded according to the requirements of the new version GMP . In order to better complete the work, he constantly discussed with the deputy production director, workshop director and QA , studying and working.
As a craftsman in the preparation workshop, Wang Junyang always does not relax the inspection of the production line and strictly controls the product quality. He said that if the inspection is relaxed, the product quality will be unqualified and the whole batch of products will be scrapped. In order to avoid unnecessary losses, before each production, he has to go to each post of the production line to check carefully whether there are any remnants of the previous batch, and report to the workshop director to release the production. When feeding, check and control the feeding amount and content, and timely transmit the test results to the post operators so that filling can be carried out in time; during production, check the non-standard behaviors on the production line, such as whether the production personnel are dressed neatly and in a standard manner, whether gloves and hats have been put on, whether they move frequently, etc. As long as there are non-standard behaviors, he will point out in time and require changes. During the operation, if there is a bottle stuck phenomenon, know the situation in time and solve it in time. After the end of the production, check the clearance situation, to see whether the production equipment is neatly placed, small tools are put back in place, and remind the staff to standardize the operation...
Wang Junyang's serious and responsible, studious and progressive work attitude has been recognized and praised by leaders and colleagues. After being named 2016 "rookie employee" of the group company, when everyone asked him what his acceptance speech was, he said shyly, excited! I'm still young, come on! (Hong Zhiwei)
More information
Recently, it was learned from the competent department that the "ERP/MES full-process informatization" project of Jianfeng Pharmaceutical Company has been included in the list of key projects of "integration of industrialization and industrialization" in Jinhua City, and has now entered the publicity period. In order to speed up the in-depth integration of informatization and industrialization, according to the evaluation criteria in Jinhua City's "Several Opinions on Accelerating Informatization Construction" and "Jinhua City Informatization and Industrialization Integration Key Project Management Measures", 148 projects were included in 2017 Jinhua City's "Integration of Industrialization and Industrialization" key projects. The "ERP/MES Full Process Informatization" project of Jianfeng Pharmaceutical Co., Ltd. was finally included in the list after being recommended, material reviewed and expert reviewed by Jinhua Economic and Information Committee. The ERP-level subsystems of ERP/MES full-process informatization project include sales system, procurement system, MRP system, GMPQbD system, connecting UFIDA financial software and HR system. MES-level subsystems include industrial data acquisition and monitoring system, GAMP/MES system, eBPR (electronic batch production record system), cGMP quality assurance system, QC/eBTR(QC process and electronic batch inspection record system), LIMS system, etc. After the construction is completed, the visualization of drug production process and the collection and integration of industrial data will be realized. Realize the electronization of drug production process parameters, electronic batch production and inspection records; the realization of big data integration of industrial data and information will also be in line with the regulatory concept of GMP data integrity and quality traceability to the greatest extent. The establishment of a unified enterprise information platform will eliminate information islands and realize data one.
2020
07-31
The company's first-half profit record high
According to the 15th meeting of the ninth board of directors of the company on August 25, in the first half of 2017, the company achieved a net profit of 240.5357 million yuan, the highest level in half a year's history. In the first half of 2017, the company focused on the general work policy of "grasping trends, precise development, strengthening management, and improving efficiency", grasping the opportunities brought by economic structure optimization and industrial upgrading, strengthening lean production and management improvement internally, and actively exploring externally Develop new opportunities and continue to promote the "three reductions and three improvements" work. Through the joint efforts of all employees of the company, the best semi-annual performance in history has been achieved. As of the end of June 2017, the company's total assets were 4.226 billion yuan and net assets were 2.511 billion yuan; the company achieved total operating income of 1,305.9327 million yuan, an increase of 18.42 percent over the same period last year, and net profit attributable to owners of the parent company was 240.5357 million yuan, an increase of 132.11 percent over the same period last year. Earnings per share are 0.7 yuan. In the second half of the year, the company will continue to focus on the annual business plan, carry out in-depth work of "three reductions and three improvements", further do a good job in internal control, prevent business risks, and further do a good job in safety and environmental protection. we will further develop and improve the complementary relatively diversified main business structure and constantly enhance the company's core competitiveness. The 15th meeting of the 9th board of directors held on August 25 was presided over by Jiang Xiaomeng, chairman of the group company. Four proposals and reports including the 2017 semi annual report and the proposal on the change of the company's accounting policy were deliberated and passed. on the same day, the 12th meeting of the eighth board of supervisors was held,
2020
07-31
General Manager Yu Jianhong to Yunnan Peak to Guide Work
On August 23, Yu Jianhong, general manager of the group company, went to Yunnan Jianfeng cement company for investigation and guidance, and put forward requirements for the key work in the last few months of this year. At the peak of Yunnan Province, Yu Jianhong went deep into the production site to learn more about the current production and operation situation, and convened the middle-level and above management backbones to have in-depth exchanges and discussions with everyone on the problems existing in work efficiency changes, personnel stability, current production and management after the implementation of post optimization and re-organization. Since the beginning of this year, Yunnan's peak production and sales volume, profits and various technological and technical indicators have been relatively ideal. The kiln output in April has also reached the best level since it was put into production. The development and maintenance of the market, the environmental management of the factory area, and the professional quality and mental state of cadres and workers have also been greatly improved. While fully affirming the above achievements, Yu Jianhong pointed out that as the homogenization of the cement market becomes more and more serious, the market changes faster and faster. If we can't recognize the situation and seize the opportunity, enterprises will face more and more problems. In this case, the management backbone should give full play to the role of the backbone, quickly change the management concept, and strive to improve the competitiveness of enterprises. In view of the focus of work in the last four months of this year, Yu Jianhong put forward the following requirements for Yunnan Jianfeng: break the inherent concept of post functions and responsibilities, set up posts and organizational structures around logistics, people flow and capital flow, and cultivate and forge a team that can fight well. To further implement the training of job skills and quality, managers should take the lead in strengthening their own learning and formulate annual, monthly and weekly training plans, through the combination of internal and external training, theory and practice.
2020
07-30
General Manager Yu Jianhong to Yunnan Peak to Guide Work
On August 23, Yu Jianhong, general manager of the group company, went to Yunnan Jianfeng cement company for investigation and guidance, and put forward requirements for the key work in the last few months of this year. At the peak of Yunnan Province, Yu Jianhong went deep into the production site to learn more about the current production and operation situation, and convened the middle-level and above management backbones to have in-depth exchanges and discussions with everyone on the problems existing in work efficiency changes, personnel stability, current production and management after the implementation of post optimization and re-organization. Since the beginning of this year, Yunnan's peak production and sales volume, profits and various technological and technical indicators have been relatively ideal. The kiln output in April has also reached the best level since it was put into production. The development and maintenance of the market, the environmental management of the factory area, and the professional quality and mental state of cadres and workers have also been greatly improved. While fully affirming the above achievements, Yu Jianhong pointed out that as the homogenization of the cement market becomes more and more serious, the market changes faster and faster. If we can't recognize the situation and seize the opportunity, enterprises will face more and more problems. In this case, the management backbone should give full play to the role of the backbone, quickly change the management concept, and strive to improve the competitiveness of enterprises. In view of the focus of work in the last four months of this year, Yu Jianhong put forward the following requirements for Yunnan Jianfeng: break the inherent concept of post functions and responsibilities, set up posts and organizational structures around logistics, people flow and capital flow, and cultivate and forge a team that can fight well. To further implement the training of job skills and quality, managers should take the lead in strengthening their own learning and formulate annual, monthly and weekly training plans, through the combination of internal and external training, theory and practice.
2020
07-31
Spike Pharmaceuticals set out to explore a new sales model
Agency and Terminal Link Production and Chain Cooperation Spike Pharmaceuticals to Explore New Sales Models From August 16 to 21, the 2017 China Pharmaceutical Retail Industry Information Conference (hereinafter referred to as "Xipu Conference") with the theme of "Building a Blueprint-Market Awakening Focusing on Demand" was held in Boao, Hainan. Huang Jinlong, deputy general manager of the group company and general manager of the pharmaceutical company, and relevant leaders of Spike Health, pharmaceutical sales company and Spike Pharma pharmacy were invited to attend the event, to create a new sales model "road". This year coincides with the 10th anniversary of the Western Conference. More than 1200 mainstream chain pharmacies, more than 800 brand pharmaceutical industries, more than 100 cross-border affiliated institutions, more than 130 top domestic and foreign capital institutions, more than 60 representatives of authoritative media, and authoritative experts in the industry, with nearly 4000 people gathered in Boao. The meeting combed the context of the pharmaceutical retail industry in the past ten years, discussed the development of the industry in the new decade, and built a new blueprint for the industry. During the meeting, Huang Jinlong led the peak participants to have in-depth exchanges with the organizers of the conference and industry experts on issues such as the impact of national policies such as the brand strategy of enterprises, the role of brand enterprises in the industry, medical reform, prescription outflow, etc. on the original sales mode of pharmaceutical enterprises. He also had extensive contact with pharmaceutical counterparts and terminal chains, listened to front-line sales experience, collected relevant information on terminal chains, and collected market trends of the top 100 chains. In the past ten years, the scale of drug retail sales in China has increased from 143 billion yuan to 337.7 billion yuan, and the chain rate has increased from 35.3 percent to 49.4 percent.
2020
07-31
General Manager Yu Jianhong to Yunnan Peak to Guide Work
On August 23, Yu Jianhong, general manager of the group company, went to Yunnan Jianfeng cement company for investigation and guidance, and put forward requirements for the key work in the last few months of this year. At the peak of Yunnan Province, Yu Jianhong went deep into the production site to learn more about the current production and operation situation, and convened the middle-level and above management backbones to have in-depth exchanges and discussions with everyone on the problems existing in work efficiency changes, personnel stability, current production and management after the implementation of post optimization and re-organization. Since the beginning of this year, Yunnan's peak production and sales volume, profits and various technological and technical indicators have been relatively ideal. The kiln output in April has also reached the best level since it was put into production. The development and maintenance of the market, the environmental management of the factory area, and the professional quality and mental state of cadres and workers have also been greatly improved. While fully affirming the above achievements, Yu Jianhong pointed out that as the homogenization of the cement market becomes more and more serious, the market changes faster and faster. If we can't recognize the situation and seize the opportunity, enterprises will face more and more problems. In this case, the management backbone should give full play to the role of the backbone, quickly change the management concept, and strive to improve the competitiveness of enterprises. In view of the focus of work in the last four months of this year, Yu Jianhong put forward the following requirements for Yunnan Jianfeng: break the inherent concept of post functions and responsibilities, set up posts and organizational structures around logistics, people flow and capital flow, and cultivate and forge a team that can fight well. To further implement the training of job skills and quality, managers should take the lead in strengthening their own learning and formulate annual, monthly and weekly training plans, through the combination of internal and external training, theory and practice.
2020
07-31
Contact Us
No. 88 Wujiang East Road, Jinhua City, Zhejiang Province, China
Tel: +86-579-82326868
Fax : +86-579-82324666
©2023 Zhejiang Jianfeng Group Co., Ltd. Powered by: www.300.cn SEO Business License
SAF Coolest v1.2 设置面板 SHJSS-AHDB-FSSQE-ZSW
无数据提示
Sorry, the current column has no content !
You can view other columns or return to Home Page