Wang Junyang: I am a young man
Release time:
2020-08-14
Wang Junyang: I am a young man
. When I pass through the office of the preparation workshop of Qiubin Factory, I can often see a young man with glasses sitting at his desk, bowing his head and busy. Say hello to him and he will look up at you with a smile. He is Wang Junyang, a craftsman in the preparation workshop. When talking with him, he said the most, "I am a young man."
In 2014 , Wang Junyang graduated from University and entered Jianfeng Pharmaceutical. He said that because he was not majoring in pharmaceuticals, when he first joined the company, he didn't know anything, so he could only "gnaw" with thick professional books all day long, effectively combining the knowledge learned in school with the practice of the enterprise, and adapt to the new environment as soon as possible.
2014 was catching up with the technical renovation of the large and small capacity injection production lines in Qiubin Factory. The leader assigned Wang Junyang to assist in the verification work. The two production lines are technically reformed at the same time, writing post SOP , equipment installation and debugging, trial production, product approval, etc. All links cannot be separated from verification work, with heavy workload and long cycle. Wang Junyang has not fully recovered from the school life and learning state, he has already devoted himself to his busy work.
Work is not only tiring, but also hungry sometimes, which is unexpected in Wang Junyang. Once, the leader asked him to write SOP for a new device. In the process of writing, he found that there was a parameter of wind speed that had not been set. He found the manufacturer's debugger, Master Fang, and asked him that it could be set up temporarily, so he ran after Master Fang for several hours. When the parameters were set, it was already over 8 o'clock in the evening, and my stomach was already growling with hunger. Wang Junyang was in a hurry to calculate other data related to this parameter without having dinner. When he finished work, it was already 10:30 at night, and he rode home for more than an hour. He was tired and could not feel hungry. He was so tired that he fell asleep in bed. But despite being so busy and tired, he never thought of giving up. He said that this job is not easy to come by, and if you want to do it, you have to do it like that.
In the technical transformation and verification of the two production lines, Wang Junyang has a new understanding of the word "communication". In addition to asking questions frequently, he must take notes and think frequently, so as to leave a deep impression. impression. The technical transformation of the two production lines has also introduced many new equipment. In order to better understand and be familiar with the performance of the new equipment, he actively communicated with operators, manufacturers debugging personnel, and machine repair personnel to strengthen understanding. After the technological transformation, each post SOP must be upgraded according to the requirements of the new version GMP . In order to better complete the work, he constantly discussed with the deputy production director, workshop director and QA , studying and working.
As a craftsman in the preparation workshop, Wang Junyang always does not relax the inspection of the production line and strictly controls the product quality. He said that if the inspection is relaxed, the product quality will be unqualified and the whole batch of products will be scrapped. In order to avoid unnecessary losses, before each production, he has to go to each post of the production line to check carefully whether there are any remnants of the previous batch, and report to the workshop director to release the production. When feeding, check and control the feeding amount and content, and timely transmit the test results to the post operators so that filling can be carried out in time; during production, check the non-standard behaviors on the production line, such as whether the production personnel are dressed neatly and in a standard manner, whether gloves and hats have been put on, whether they move frequently, etc. As long as there are non-standard behaviors, he will point out in time and require changes. During the operation, if there is a bottle stuck phenomenon, know the situation in time and solve it in time. After the end of the production, check the clearance situation, to see whether the production equipment is neatly placed, small tools are put back in place, and remind the staff to standardize the operation...
Wang Junyang's serious and responsible, studious and progressive work attitude has been recognized and praised by leaders and colleagues. After being named 2016 "rookie employee" of the group company, when everyone asked him what his acceptance speech was, he said shyly, excited! I'm still young, come on! (Hong Zhiwei)
More information
The company's vocational skill level self-identification training began.
After preparing the handout materials and question bank for the previous stage of vocational skill grade identification training, daye peak cement company conducted the vocational skill grade identification training for the machine repair team of the manufacturing department on August 10. On August 12 and 18, the pharmaceutical company also organized two phases of vocational skill level identification training for pharmaceutical preparation workers. According to the national skill level standard, the group company is divided into four grades: grade 5/junior worker, grade 4/intermediate worker, grade 3/senior worker and grade 2/technician. According to the analysis of employee registration, since there is only one type of job for pharmaceutical preparation workers, and cement production workers include cement central controller, cement quality inspector, cement clinker calciner, cement manufacturer, cement production inspection worker and other types of jobs, the number of applicants is less than that of cement production workers. Most of the employees who signed up were identified as participating in the four levels of vocational skills. According to preliminary statistics, there are now 155 employees who have signed up for their professional skill level, including 47 pharmaceutical preparation workers and 108 cement production workers. The human resources department of the group company is stepping up efforts to organize personnel to examine the qualifications of the employees whose registration grades are identified, and then enter the Zhejiang professional ability integration platform for formal registration after passing the examination. According to the national vocational skill standards and other content, each unit carries out targeted training for employees who participate in the independent identification of vocational skill levels. The training is conducted through on-site teaching, online teaching, and learning platform question bank exercises. After the training, the group company will organize the employees who participate in the grade identification to carry out examination and assessment, and those who pass the examination will complete the grade identification and issue the skill grade certificate. It is understood that in order to ensure the quality of vocational skill level identification, after the company was approved to independently identify the vocational skill level, the human resources department of the group organized all units to compile the question bank for various types of work in combination with the actual situation of the enterprise and with reference to the national vocational skill standards and training syllabus and other materials. after classification, unification and standardization, verification and proofreading, the preparation of the question bank has been basically completed. After being submitted to the superior unit for examination and approval, the company will import the question bank on the enterprise university platform to facilitate employees to prepare for the examination. The question bank for the independent identification of vocational skills level will also be extracted from the question banks of various industries, including professional ethics, basic knowledge, safety and environmental protection knowledge, laws and regulations knowledge, professional work practice and other national vocational skills standards. Basic requirements. The examination and assessment for independent determination of vocational skill level is tentatively scheduled for mid-September.
2021
08-23
Hu Guoyun, vice mayor of Pu'er, visited the peak
On July 16, a delegation led by Hu Guoyun, vice mayor of Pu'er City, Yunnan Province, and heads of Pu'er SASAC, Industrial Park Management Committee, Investment Promotion Bureau and other departments visited the headquarters of the group company. In the exchange with Jiang Xiaomeng, Yu Jianhong and other group leaders, Hu Guoyun expressed his gratitude to Jianfeng Group on behalf of the Pu'er Municipal Party Committee and Municipal Government. He said that the investment and entrepreneurship from Jianfeng to Pu'er not only promoted the development of Pu'er's regional industrial economy, but also made outstanding contributions to the local poverty alleviation. The two sides also exchanged and discussed issues such as strengthening in-depth cooperation between the two sides.
2021
07-21
Municipal SASAC Party Committee Visited Jianfeng Old Party Member
On June 28, Huang Zunhui, a second-level researcher of the State-owned Assets Supervision and Administration Commission of Jinhua City, visited Jianfeng Group and made a special trip to visit two retired party members, Chen Bingxiang and Yin Rongfu. Among the two Jianfeng veteran party members, Chen Bingxiang has been engaged in party affairs for nearly 30 years, and Yin Rongfu has won the honor of outstanding party members in Zhejiang Province and is a representative of Jianfeng party workers and party members. On behalf of the party committee of the Municipal State-owned assets Supervision and Administration Commission, Huang Zunhui expressed condolences to the two veteran party members, thanked the older generation of party members for their contributions, and exchanged views with Jiang Xiaomeng, secretary of the party committee and chairman of the group, and Qin Xuping, member of the party committee and chairman of the trade union, and fully affirmed the development of peak in recent years and the improvement of the level of party building work.
2021
07-12
"I'll teach you a lesson." Concluded successfully.
On the afternoon of June 24, as one of the highlights of the company's 2021 safety production month series of activities, the second phase of the "I'll give you a lesson" safety training was held at the group headquarters. the management personnel, production backbones and personnel from all departments and offices of the group gathered at the scene. foreign enterprises took safety "big lessons" through video, which was more effective than the teaching. At this point, the "I'll give you a lesson" safety training has come to a successful conclusion.
2021
07-12
Glory in the Party's 50-year-old Party Member Xi Ling Commemorative Medal
On June 23, the party committee of the group company sent a special person to visit and awarded the commemorative medals of "50 years of Glory in the Party" to six veteran party members. 2021 is the 100 anniversary of the founding of the Communist Party of China. For the first time, the Party Central Committee issued the "50 Years of Glory in the Party" commemorative medal to surviving party members who have reached the 50th anniversary of the party and have always performed well. The Organization Department of the Central Committee also specially issued the "Administrative Measures for the Issuance of Commemorative Medals of" Glory in the Party for 50 Years "", which stipulates the issuance procedures, issuance methods, production, and management of commemorative medals. In the future, the "50 Years of Glory in the Party" commemorative medal will be issued as a regular task and will be issued once every year around July 1.
2021
07-12
What is the exact time of the first Congress of the Communist Party of China? Which "big" representatives boarded the red boat in South Lake? What is the connection between the 1972 Sino-US Joint Communique and Hangzhou? On the morning of June 24th, the Party Committee of the Group Company invited members of the Party History Learning and Education Group of Zhejiang Provincial Party Committee and the vice president of Zhejiang Branch of China News Service to give a special party class of "returning to the scene of party history and reappearing the moment of party history" for the party members and cadres of the Company.
2021
07-01
Contact Us
No. 88 Wujiang East Road, Jinhua City, Zhejiang Province, China
Tel: +86-579-82326868
Fax : +86-579-82324666
©2023 Zhejiang Jianfeng Group Co., Ltd. Powered by: www.300.cn SEO Business License
SAF Coolest v1.2 设置面板 SHJSS-AHDB-FSSQE-ZSW
无数据提示
Sorry, the current column has no content !
You can view other columns or return to Home Page