Azithromycin Sulfate for Injection Instructions
Release time:
2020-07-31
Approval Date: March 29, 2007
First Amendment Date: November 13, 2007
Second Amendment Date: October 31, 2014
-dimensional Ruth
Azithromycin Sulfate Instructions
Please read the instructions carefully and use them under the guidance of doctors.
[Drug Name]
Common Name: Azithromycin Sulfate for Injection
Trade Name: Verude
English Name: Azithromycin Sulfate for Injection
Chinese Pinyin: ZhusheyongLiusuan Aqimeisu
[Ingredients] The main ingredient of this product is azithromycin sulfate, and its chemical name is: 9-deoxy -9 α-aza -9 α-methyl -9 α-erythromycin A sulfate.
Chemical Structural Formula:
Molecular Formula: C38H72N2012 H2S04
Molecular Weight: 847.00
[Character] This product is white or almost white loose block or powder.
[indications] 1, for acute pharyngitis caused by Streptococcus pyogenes, acute tonsillitis.
2. For pneumonia caused by Streptococcus pneumoniae, influenza bacillus and Mycoplasma pneumoniae.
3, for chlamydia caused by urethritis and cervicitis.
4. It is used for acute bronchitis and acute attack of chronic bronchitis caused by sensitive bacteria.
5. For skin and soft tissue infections caused by sensitive bacteria.
[Specifications] 0.25g (250000 units) and 0.5g (500000 units) (calculated by C38H72N2012)
[Usage and Dosage] Fully dissolve the product with appropriate amount of water for injection to prepare a solution containing 0.1g per 1ml, then add it to 250ml or 500ml of 0.9 sodium chloride injection or 5% glucose injection, and the final azithromycin concentration is 1.0-2.0 mg/ml for intravenous drip, instillation time: 1 mg/ml, instillation for 3 hours; 2 mg/ml, instillation for 1 hour. For the treatment of community-acquired pneumonia, the adult dosage is 0.5g each time, once a day, for at least 2 consecutive days. Next, azithromycin oral preparation 0.5g/day, 7-10 days of treatment for a course of treatment. The timing of conversion to oral therapy should be determined by the physician based on clinical response. For the treatment of pelvic inflammatory disease, the adult dosage is 0.5g each time, once a day. After 1 day or 2 days of medication, azithromycin oral preparation O.25g is used instead, with 7 days as a course of treatment. The timing of conversion to oral therapy should be determined by the physician based on clinical response. If an anaerobic infection is suspected, an anti-anaerobic drug should be used.
[adverse reactions] occasionally can appear dizziness, headache and fever, rash, joint pain and other allergic reactions, rare anaphylactic shock and angioedema. A few patients may have transient neutropenia and elevated serum aminotransferase.
[taboo] to erythromycin or other macrolide drug allergy is prohibited.
[Precautions] Patients with liver damage should use this product with caution.
[medication for pregnant and lactating women] animal experiments have shown that azithromycin has no effect on the fetus, but it is still lack of experience in the application of human pregnant women, so it is necessary to fully weigh the pros and cons in the application of pregnant women.
There is no information on whether azithromycin can be secreted into breast milk, and the use of azithromycin in lactating women should be considered with caution.
[Children's medication] The dosage and administration method for children under 6 months of age have not been established. Efficacy and safety for the treatment of otitis media in infants less than 6 months of age, community-acquired pneumonia, and pharyngitis or tonsillitis in children less than 2 years of age have not been established.
[Geriatric use] This experiment has not been performed and there are no reliable references.
[Drug Interactions] l. When combined with aminophylline, attention should be paid to monitoring the blood concentration of the latter.
2, and warfarin should pay attention to check the prothrombin time.
3, combined with carbamazepine and digoxin, can increase the blood concentration of carbamazepine and digoxin.
[Overdose] This experiment was not performed and there are no reliable references.
[Pharmacology and Toxicology] Azithromycin is a 15-member ring macrolide, the first variety of nitrogen lactones. Its mechanism of action is the same as that of erythromycin, which mainly binds to the 50s subunit of bacterial ribosome and inhibits RNA-dependent protein synthesis. This product has good antibacterial effect on Streptococcus pyogenes, Streptococcus pneumoniae and influenza bacillus, and also has antibacterial activity on Staphylococcus. This product on Staphylococcus, Streptococcus and other Gram-positive cocci antibacterial effect is slightly worse than erythromycin on influenza bacilli and Moraxella catarrh antibacterial effect than erythromycin 4~8 times and 2~4 times, on a small number of Escherichia coli, Salmonella, Shigella can also have antibacterial effect. This product has good antimicrobial effect on anaerobic bacteria such as digestive streptococcus, mycoplasma pneumoniae and chlamydia trachomatis.
[Pharmacokinetics] This product is widely distributed in the body, and its concentration in various tissues can reach l0 ~ 100 times of the blood drug concentration in the same period. This product has high concentration in macrophages and fibroblasts, the former can transport azithromycin to the site of inflammation. The half-life (tl/2) of azithromycin after a single dose is 35-48 hours, more than 50% of the dose is excreted through the biliary tract in the original form, and about 4.5 within 72 hours after administration is excreted in the original form with urine.
[Storage] Closed and stored in a cool place (not more than 20 ℃).
[Packaging] Glass bottles, 0.25g × 2 bottles/box, 0.25g × 1 bottle/box, 0.25g × 10 bottles/box, 0.5g × 1 bottle/box, 0.5g × 10 bottles/box.
[validity] tentatively 24 months.
[Implementation Standard] WS-359(X-305)-2002(1)(0.25g);WS-359(X-305)-2002(2)(0.5g)
[Approval Document No.] H20000728(0.25g), H20000729(0.5g).
[Production Enterprise]
Enterprise Name: Zhejiang Jianfeng Pharmaceutical Co., Ltd.
Address: No. 58, Gaofan Section, Baitang Downline, Wucheng District, Jinhua City, Zhejiang Province
Tel: 0579-82661998 (Consultation) 0579-82131973 (Sales)
Fax Number: 0579-82661998 Postal Code: 321075
Website: www.zjjfyy.com.cn
More information
Jingmai Airport Test Flight Successfully Runway Cement Spike Manufacturing
On April 7, a Boeing 737-700 aircraft of China Eastern Airlines Yunnan took off from Kunming. After completing two flight test subjects, it landed safely at Lancang Jingmai Airport. This not only marked the basic completion of the airport flight area, The official start of the test flight also marked that the "Peak" brand airport runway cement passed the first "final exam". Lancang Jingmai Airport is a major project with milestone significance in the history of Pu'er transportation construction. Since then, an air corridor connecting southwest Yunnan and Southeast Asia has been added between Kunming and Pu'er, which will greatly promote the development and utilization of tourism resources in Lancang, Menglian and Ximeng "Pu'er Green Triangle" area, and promote the sustainable development of local economy and society; it is of great significance to strengthen the city's national defense construction, maintain border stability, promote national unity, improve emergency rescue capabilities, and promote Pu'er's integration into the country's "Belt and Road" construction. Since the start of the construction of the airport, Yunnan Jianfeng has been paying close attention to it, organizing technical research and repeated tests, and finally produced high-quality airport runway special cement, and with excellent product quality, superior product performance and high-quality service, it has become a runway for Lancang Airport. Cement manufacturer. This not only fills the gap of "peak" airport special cement, but also is of great significance to promote the "peak" brand and improve the market influence of enterprises. It is understood that Jingmai Airport is initially confirmed to be officially opened to traffic at the end of May. (Li Liangping)
2020
07-31
Jianfeng Pharmaceutical Artificial Niuhuang Project Starts
News from this newspaper Jianfeng Pharmaceutical artificial bezoar technical transformation project recently started construction in Qiubin Factory. Artificial bezoar has the effect of clearing away heat and detoxification, resolving phlegm, and is commonly used in Chinese and Western medicines such as colds, clearing away heat and detoxification. As the vast majority of artificial bezoar-related preparations are national essential drugs, with the further implementation of the medical reform policy, the downstream industry of artificial bezoar will enter a new round of business cycle. Jianfeng Pharmaceutical has many years of experience in artificial bezoar production. The technological transformation project will use the existing workshop structure, public works and operators of Qiubin Factory to achieve an annual production capacity of 100 tons of artificial bezoar by adding production equipment such as double cone rotary vacuum drying, horizontal ball mill pulverizer unit, hopper and hoist, closed screening system, and upgrading some public systems. According to the project implementation plan, the project will complete the civil engineering in May. Complete the commissioning, testing and verification of equipment and facilities in July, with trial production conditions; Strive to complete the on-site inspection of GMP certification before the end of December. At present, the factory buildings in Qiubin are vacated and the site is cleaned up. It is understood that the production of natural bezoar is very small, the price is extremely high, and the market rarely provides it. As a biochemical API, artificial bezoar has fewer manufacturers. In the past, due to relatively loose supervision, the testing methods of raw materials and finished products are relatively simple, the quality control indicators are not perfect, and the quality of products on the market is uneven. It is imperative to improve the quality standards. To this end, the State Food and Drug Administration issued the "Biochemical Drug GMP Quality Management Practice (Draft for Comment)" at the end of 2016, which was implemented in March 2017. spike medicine
2020
07-31
Recently, Jianfeng Health has been awarded a number of plaques and certificates by the Department of Science and Technology of Zhejiang Province, the people's Government of Jinhua City, and the Science and Technology Bureau of Jinhua City. They are "Zhejiang Science and Technology small and medium-sized Enterprises", "Jinhua High-tech Enterprises", "Jinhua Agricultural Science and Technology Enterprises", "Jinhua Agricultural Science and Technology Research and Development Center" and so on. According to the relevant requirements, Zhejiang science and technology-based small and medium-sized enterprises must be small and medium-sized enterprises with independent intellectual property rights, proprietary technology or advanced knowledge, engaged in the research, development, production, sales and service of high-tech and its products, and the proportion of enterprises engaged in scientific and technological research and development personnel accounting for no less than 10% of the total number of employees in that year. Since its establishment, Jianfeng Health has attached great importance to the training of scientific and technological personnel, paid attention to the application of its own intellectual property rights, paid attention to product research and development and the protection of intellectual property rights, promoted the application of intellectual property rights, and encouraged employees to invent and create. By the end of 2016, a total of 8 invention patents and 5 appearance patents had been applied, and 1 invention patent and 5 appearance patents had been obtained. High-tech enterprises in Jinhua City must meet the requirements of the ''High-tech Fields Supported by the State, ''and continue to carry out research and development and technological achievements transformation. Their main products (services) have independent intellectual property rights (authorized, registered or accepted). There are certain requirements for the proportion of R & D personnel, the proportion of R & D funds and the income of high-tech products. The acquisition of high-tech enterprises in Jinhua City has laid the foundation for the further declaration of national high-tech enterprises in the future. In the identification of agricultural science and technology enterprises in Jinhua City, the field of peak health technology belongs to the deep processing technology and equipment of agricultural products, Chinese herbal pieces and plant extracts.
2020
07-31
Jingmai Airport Test Flight Successfully Runway Cement Spike Manufacturing
On April 7, a Boeing 737-700 aircraft of China Eastern Airlines Yunnan took off from Kunming. After completing two flight test subjects, it landed safely at Lancang Jingmai Airport. This not only marked the basic completion of the airport flight area, The official start of the test flight also marked that the "Peak" brand airport runway cement passed the first "final exam". Lancang Jingmai Airport is a major project with milestone significance in the history of Pu'er transportation construction. Since then, an air corridor connecting southwest Yunnan and Southeast Asia has been added between Kunming and Pu'er, which will greatly promote the development and utilization of tourism resources in Lancang, Menglian and Ximeng "Pu'er Green Triangle" area, and promote the sustainable development of local economy and society; it is of great significance to strengthen the city's national defense construction, maintain border stability, promote national unity, improve emergency rescue capabilities, and promote Pu'er's integration into the country's "Belt and Road" construction. Since the start of the construction of the airport, Yunnan Jianfeng has been paying close attention to it, organizing technical research and repeated tests, and finally produced high-quality airport runway special cement, and with excellent product quality, superior product performance and high-quality service, it has become a runway for Lancang Airport. Cement manufacturer. This not only fills the gap of "peak" airport special cement, but also is of great significance to promote the "peak" brand and improve the market influence of enterprises. It is understood that Jingmai Airport is initially confirmed to be officially opened to traffic at the end of May. (Li Liangping)
2020
07-30
Peak Pharmaceutical was rated as a national intellectual property advantage enterprises
The score ranked first among Jinhua participating enterprises. A few days ago, Peak Pharmaceutical Company was rated as a national intellectual property advantage enterprise. The selection of national intellectual property advantage enterprises is organized by the State Intellectual Property Office. The purpose is to accelerate the formation of a group of Chinese intellectual property leading enterprises with independent intellectual property rights, well-known brands and international competitive advantages, and achieve the development goal of strong intellectual property enterprises. Since Jianfeng Pharmaceutical introduced the GB-T29490-2013 "Enterprise Intellectual Property Management Standard" in 2013, it has been rated as a patent demonstration enterprise in Zhejiang Province in 2013. In 2014, the "Jianfeng" trademark obtained a famous trademark in Zhejiang Province, and the first edition of the "Intellectual Property Manual" was compiled and implemented in 2015. In 2016, it passed the third-party certification of the GB-T29490-2013 "Enterprise Intellectual Property Management Standard". The "Jianfeng" trademark was rated as a well-known trademark by the State Administration of China. In the application and selection of national knowledge by superior enterprises, 52 enterprises in Zhejiang Province won this honor, ranking second in the country in number; Jianfeng Pharmaceutical ranked first among Jinhua participating enterprises. (Zhang Mingyin)
2020
07-31
Group Party Committee to determine the annual work plan
The party Committee of the group company has determined its work ideas and work plan for 2017 a few days ago, and relevant work has been arranged below. In view of the current new political and economic situation and the task of enterprise transformation and development, the general requirements of the Party Committee of the Group Company for 2017 are: to thoroughly study and implement the spirit of the Sixth Plenary Session of the 18th CPC Central Committee and the series of important speeches by General Secretary Xi Jinping, the spirit of the Seventh Party Congress of Jinhua City, to closely revolve around the center of enterprise production, operation and reform and development, and to adhere to scientific development and cross-regional development as the first priority, in order to continue to carry out the study and education of "five stars striving for innovation" and "two learning and one doing", we should highlight the main line of comprehensively and strictly administering the party according to the rules, firmly establish the political consciousness, overall situation consciousness, core consciousness and alignment consciousness of the majority of Party members and cadres, strengthen and improve the party building work in enterprises in the spirit of reform, and strive to improve the scientific, standardized and institutionalized level of Party building work in enterprises, in order to promote the scientific development of the group company, leapfrog development and harmonious development, it provides a strong political, ideological and organizational guarantee. The working idea of the Party Committee of the Group Company in 2017 is to focus on "one center", adhere to "one concept", highlight "three key points" and do a good job in "three constructions". That is: centering on the "one center" of enterprise production, operation and reform and development, we should strive to strengthen the "one concept" of "the organic unity of the party's leadership and the improvement of corporate governance"; to "thoroughly implement the main responsibility of the party committee; continue to carry out the study and education of" two learning and one doing "; and improve the system of party building work" as the "three key points", and focus on "team building and team building
2020
07-31
Contact Us
No. 88 Wujiang East Road, Jinhua City, Zhejiang Province, China
Tel: +86-579-82326868
Fax : +86-579-82324666
©2023 Zhejiang Jianfeng Group Co., Ltd. Powered by: www.300.cn SEO Business License
SAF Coolest v1.2 设置面板 SHJSS-AHDB-FSSQE-ZSW
无数据提示
Sorry, the current column has no content !
You can view other columns or return to Home Page