News Center

Home page

Peak Report

News reports

Concrete pouring

Release time:

2020-07-31

concrete pouring should comply with the corresponding construction specifications, special attention should be paid to:
1, concrete in the construction of water-absorbing objects involved in the corresponding treatment before pouring, in order to avoid concrete moisture absorption, affecting the quality of concrete.
2, concrete should be poured before the initial setting, and there can be no segregation phenomenon, if there is segregation phenomenon, should be re-mixing, before pouring, and pouring process should also avoid segregation phenomenon.
3. When pouring structures such as columns, a layer of 50-100mm cement mortar (the mix ratio is the same as that in concrete) shall be poured at the bottom to avoid honeycomb pitting.
4, concrete pouring, should be carried out in layers according to the structural requirements, with pouring and tamping.
5. The overall concrete pouring of general structures shall be carried out continuously as much as possible to avoid intermittent construction. In the initial stage after concrete pouring, the concrete shall be protected from vibration or impact.
7. When making cement floor, roof platform and other parts, attention should be paid to the plastering operation. Generally, it should be plastered many times until there is no bleeding on the surface, but dry powder should not be sprinkled and cured in time during the plastering process.
8. In order to prevent early cracks in road construction, attention should be paid to:
①. Under the condition of meeting the design grade of concrete, accurate measurement should be made, excessive cement should not be used, and the unit water consumption of concrete should be mastered to reduce the shrinkage of concrete.
②, do not use high-temperature cement, the cement temperature during site construction should be lower than 70 ℃. In summer construction, the pouring temperature of concrete should be reduced as much as possible, the operation time from the beginning of pouring to the completion of surface finishing should be shortened, and the concrete should be fully cured. Regardless of the circumstances and conditions, the temperature of the concrete mixture shall not exceed 35 ℃. During winter construction, the mixing time should be extended, and the discharge temperature should not be lower than 10 ℃. At the same time, after the construction of pavement concrete, the first three days of maintenance temperature should be maintained above 10 ℃, the next 7 days of maintenance temperature should be maintained above 5 ℃.
③. When using dry aggregate exposed to sunlight for a long time, water shall be fully sprinkled to cool down.
④, the top surface of the base should be fully wet before pouring concrete, or take waterproof measures.
⑤, concrete surface finishing process, to avoid direct sunlight, do not make the temperature rise and dry.
⑥. According to the strength development, master the appropriate time for plate cutting to prevent the concrete slab from breaking.

"Peak Brand" Cement Strength Guarantee Value

Peak Cement Implementation GB175-1999 Standard Strength Guarantee Value

Product	Strength Grade	Compressive Strength Mpa		Compressive Strength Mpa
Product	Strength Grade	3d	28d	3d	28d
silicate cement	42.5R	25.0	48.0	4.5	7.5
silicate cement	52.5	27.0	56.0	4.5	8.0
Ordinary Silicate Cement	32.5R	18.0	40.0	4.0	6.5
	42.5	20.0	48.0	4.0	7.5
	42.5R	23.0	48.	4.5	7.5
	52.5	26.0	56.0	4.5	8.0
Composite Cement	32.5R	18.0	40.0	4.0	6.5

More information

2022 China's Top 100 Building Materials Enterprises 2022 China's Top 100 Cement Clinker Production Capacity Peak even on two authoritative lists

In March, the authoritative organization of the cement industry successively released two series of lists of China's top 500 building materials enterprises in 2022 and China's top 100 cement clinker production capacity in 2022. Jianfeng Group ranked among the "top 100" in the two lists ". The list of China's top 500 building materials enterprises was officially released in early March. This series of lists was selected by the China Building Materials Enterprise Management Association. Through more than 20 years of comprehensive data research on China's building materials industry, referring to international practices, the rankings are based on the company's annual operating income., Cement products, building ceramics, waterproof materials, aluminum-plastic profiles, coatings, glass, building materials equipment manufacturing and other sub-industries related to building materials. Jianfeng Group ranks 96th among the companies on the list and 27th among the cement manufacturers on the list. On March 16, the awarding ceremony of 2022 China's top 100 cement clinker production capacity list was held in Hangzhou. This series of lists is released by China Cement Network, an authoritative organization in China's cement industry. The ranking is based on the total production capacity (excluding the production capacity of other kiln types and grinding stations) of new dry clinker production lines completed and put into operation by Chinese cement enterprises in China as of December 31, 2022. The data statistics are calculated based on the design production capacity and 310 days of annual operation. Jianfeng Group ranked 53rd with an annual design capacity of 3.627 million tons. (this newspaper reporter)

2023

03-21

Company sends off retired employees

On the morning of February 22, the trade union of the group company held a simple and warm farewell party for retired employees in 2021-2022. More than 50 retired employees gathered together to discuss and exchange with Jiang Xiaomeng and other group leaders.

2023

03-04

On the first day of the new year, group leaders went to the grassroots level.

On January 29, the first day of work after the Spring Festival holiday, the leaders of the group company made a video connection to subordinate enterprises stationed abroad, and separately visited the gold enterprises to learn about the resumption of work and put forward requirements for the implementation of the work plan for the new year.

2023

02-17

Group Companies Commend 2022 Advanced

On the morning of January 18, the group company held the 2022 annual summary commendation meeting to review the work of the previous year, make arrangements for the work in 2023, sign the 2023 economic responsibility system with various professional companies and directly affiliated enterprises, and solemnly commend the 2022 advanced collectives and individuals.

2023

01-29

Jiang Xiaomeng re-elected chairman of the Municipal Federation of Industry and Commerce

On December 24, 2022, the Jinhua Federation of Industry and Commerce (General Chamber of Commerce) held the seventh member representative meeting. Jiang Xiaomeng, secretary of the party committee and chairman of the group company, was re-elected as the chairman of the Municipal Federation of Industry and Commerce at this meeting.

2023

01-12

Peak Pharmaceutical Donates Epidemic Prevention Materials

Since the optimization and adjustment of the new crown infection epidemic management policy, there has been an explosive growth of infected people in the country, and the pressure on the supply of related materials has increased sharply. Before and after New Year's Day, the company has twice organized epidemic prevention materials, through the Jinhua City Charity Federation, Jinhua City Economic and Technological Development Zone Charity Federation targeted donations, a total value of more than 200,000 yuan.

2023

01-12

< 1 2 3 4...61 > 跳转到页