I grew up in New North Card
Release time:
2023-06-07
I joined the New North Card Security Management Department in August 2021 and began to contact fire safety work. The elder who handed over the work took me to check the fire extinguisher in the workshop and told me to check whether the fire extinguisher is effective depends on whether the pointer of the pressure gauge is in the green area: "the pointer represents low pressure in the red area, normal in the green area, and overpressure in the yellow area." I also have a job is to update the social unit fire household registration management system information on a daily basis. Look at the position of the pointer and update a few words and numbers. At that time, I felt that the fire safety work was very simple and not complicated at all.
With the trial production of Xinbeika 205 workshop, when participating in the revision of the trial production plan, a series of materials required for trial production, such as construction projects, safety facilities, properties of hazardous chemicals, varieties and design capabilities of stored chemicals, main production equipment, etc., made me dizzy. Only then did I really realize that fire safety is a very complicated and in-depth work. In the architectural design, the fire prevention distance from adjacent workshops and warehouses, the net width of the fire escape route and the distance to the safety exit, the stability and integrity of the fire prevention components inside the workshop, the number and model of fire extinguishers should be set, and the effective area of fire extinguishers should be calculated, etc., all of which need to be understood. At that time, I was like a sponge into the ocean of knowledge, absorbing and improving all the time. However, understanding and application are two different things. Once during training, the staff asked what substance was in the dry powder fire extinguisher, and I answered casually that it should be sodium bicarbonate. After the inquiry, it was found that the dry powder fire extinguishers mainly include ammonium phosphate, sodium bicarbonate, sodium chloride, potassium chloride, potassium bicarbonate, potassium carbonate and so on. I was glad that I was not wrong. At the same time, I was more aware of the difficulty and depth of fire fighting work.
Our company belongs to the key fire fighting chemical unit, so the safety committee has set up a voluntary fire brigade, an emergency rescue team and a security team. I am responsible for the daily training and practical operation of these three teams. Every month, the members of these three teams have to conduct training examinations, emergency plan drills, and practical competitions to continuously improve team building and improve the skill level of the team members. In this process, I feel the importance of enterprise managers to safety work, but also feel the importance of their work. In the future, chemical production will move closer to automation, so automation operators must improve their knowledge and ability to not be eliminated in the ever-changing competitive environment.
Safety work must be inseparable from all-time inspection. What will be inspected in the tank farm of major hazard sources? On-site fire fighting inspection is to check the daily maintenance of the foam generating device, pipeline valve status, foam foaming multiple, foam validity period, fire fighting water pressure, etc. Its strong backing is the fire fighting pipe network system. Whether the outlet pressure can reach 0.7-1.2Mpa, whether the outlet pressure at the most unfavorable point is greater than 0.07Mpa, how to manually or automatically turn on the fire pump when a fire occurs, and whether the pressure stabilizing pump is stably pressurized? Foreign experts in the inspection of the enterprise fire will be random questions, at the beginning, I often can not answer. After the failure, I went to check and ask myself, 1.1 to understand the relevant knowledge, and then I could calmly deal with all kinds of fire-related contents.
After going through various inspections, large and small, I have made considerable changes when I joined the company. I have a deeper understanding of the internal situation of the company, and I am no longer nervous to meet the inspection. I can handle my own work and the work temporarily issued by the leader independently. I have grown up in New North Card, which has enhanced my sense of achievement and achievement. (Xu Xiaoqiang)
More information
The company's vocational skill level self-identification training began.
After preparing the handout materials and question bank for the previous stage of vocational skill grade identification training, daye peak cement company conducted the vocational skill grade identification training for the machine repair team of the manufacturing department on August 10. On August 12 and 18, the pharmaceutical company also organized two phases of vocational skill level identification training for pharmaceutical preparation workers. According to the national skill level standard, the group company is divided into four grades: grade 5/junior worker, grade 4/intermediate worker, grade 3/senior worker and grade 2/technician. According to the analysis of employee registration, since there is only one type of job for pharmaceutical preparation workers, and cement production workers include cement central controller, cement quality inspector, cement clinker calciner, cement manufacturer, cement production inspection worker and other types of jobs, the number of applicants is less than that of cement production workers. Most of the employees who signed up were identified as participating in the four levels of vocational skills. According to preliminary statistics, there are now 155 employees who have signed up for their professional skill level, including 47 pharmaceutical preparation workers and 108 cement production workers. The human resources department of the group company is stepping up efforts to organize personnel to examine the qualifications of the employees whose registration grades are identified, and then enter the Zhejiang professional ability integration platform for formal registration after passing the examination. According to the national vocational skill standards and other content, each unit carries out targeted training for employees who participate in the independent identification of vocational skill levels. The training is conducted through on-site teaching, online teaching, and learning platform question bank exercises. After the training, the group company will organize the employees who participate in the grade identification to carry out examination and assessment, and those who pass the examination will complete the grade identification and issue the skill grade certificate. It is understood that in order to ensure the quality of vocational skill level identification, after the company was approved to independently identify the vocational skill level, the human resources department of the group organized all units to compile the question bank for various types of work in combination with the actual situation of the enterprise and with reference to the national vocational skill standards and training syllabus and other materials. after classification, unification and standardization, verification and proofreading, the preparation of the question bank has been basically completed. After being submitted to the superior unit for examination and approval, the company will import the question bank on the enterprise university platform to facilitate employees to prepare for the examination. The question bank for the independent identification of vocational skills level will also be extracted from the question banks of various industries, including professional ethics, basic knowledge, safety and environmental protection knowledge, laws and regulations knowledge, professional work practice and other national vocational skills standards. Basic requirements. The examination and assessment for independent determination of vocational skill level is tentatively scheduled for mid-September.
2021
08-23
Hu Guoyun, vice mayor of Pu'er, visited the peak
On July 16, a delegation led by Hu Guoyun, vice mayor of Pu'er City, Yunnan Province, and heads of Pu'er SASAC, Industrial Park Management Committee, Investment Promotion Bureau and other departments visited the headquarters of the group company. In the exchange with Jiang Xiaomeng, Yu Jianhong and other group leaders, Hu Guoyun expressed his gratitude to Jianfeng Group on behalf of the Pu'er Municipal Party Committee and Municipal Government. He said that the investment and entrepreneurship from Jianfeng to Pu'er not only promoted the development of Pu'er's regional industrial economy, but also made outstanding contributions to the local poverty alleviation. The two sides also exchanged and discussed issues such as strengthening in-depth cooperation between the two sides.
2021
07-21
Municipal SASAC Party Committee Visited Jianfeng Old Party Member
On June 28, Huang Zunhui, a second-level researcher of the State-owned Assets Supervision and Administration Commission of Jinhua City, visited Jianfeng Group and made a special trip to visit two retired party members, Chen Bingxiang and Yin Rongfu. Among the two Jianfeng veteran party members, Chen Bingxiang has been engaged in party affairs for nearly 30 years, and Yin Rongfu has won the honor of outstanding party members in Zhejiang Province and is a representative of Jianfeng party workers and party members. On behalf of the party committee of the Municipal State-owned assets Supervision and Administration Commission, Huang Zunhui expressed condolences to the two veteran party members, thanked the older generation of party members for their contributions, and exchanged views with Jiang Xiaomeng, secretary of the party committee and chairman of the group, and Qin Xuping, member of the party committee and chairman of the trade union, and fully affirmed the development of peak in recent years and the improvement of the level of party building work.
2021
07-12
"I'll teach you a lesson." Concluded successfully.
On the afternoon of June 24, as one of the highlights of the company's 2021 safety production month series of activities, the second phase of the "I'll give you a lesson" safety training was held at the group headquarters. the management personnel, production backbones and personnel from all departments and offices of the group gathered at the scene. foreign enterprises took safety "big lessons" through video, which was more effective than the teaching. At this point, the "I'll give you a lesson" safety training has come to a successful conclusion.
2021
07-12
Glory in the Party's 50-year-old Party Member Xi Ling Commemorative Medal
On June 23, the party committee of the group company sent a special person to visit and awarded the commemorative medals of "50 years of Glory in the Party" to six veteran party members. 2021 is the 100 anniversary of the founding of the Communist Party of China. For the first time, the Party Central Committee issued the "50 Years of Glory in the Party" commemorative medal to surviving party members who have reached the 50th anniversary of the party and have always performed well. The Organization Department of the Central Committee also specially issued the "Administrative Measures for the Issuance of Commemorative Medals of" Glory in the Party for 50 Years "", which stipulates the issuance procedures, issuance methods, production, and management of commemorative medals. In the future, the "50 Years of Glory in the Party" commemorative medal will be issued as a regular task and will be issued once every year around July 1.
2021
07-12
What is the exact time of the first Congress of the Communist Party of China? Which "big" representatives boarded the red boat in South Lake? What is the connection between the 1972 Sino-US Joint Communique and Hangzhou? On the morning of June 24th, the Party Committee of the Group Company invited members of the Party History Learning and Education Group of Zhejiang Provincial Party Committee and the vice president of Zhejiang Branch of China News Service to give a special party class of "returning to the scene of party history and reappearing the moment of party history" for the party members and cadres of the Company.
2021
07-01
Contact Us
No. 88 Wujiang East Road, Jinhua City, Zhejiang Province, China
Tel: +86-579-82326868
Fax : +86-579-82324666
©2023 Zhejiang Jianfeng Group Co., Ltd. Powered by: www.300.cn SEO Business License
SAF Coolest v1.2 设置面板 SHJSS-AHDB-FSSQE-ZSW
无数据提示
Sorry, the current column has no content !
You can view other columns or return to Home Page