Safety management is the foundation of enterprise
Release time:
2023-06-25
I am a safety management worker in Tianjin Jianfeng Natural Products Company. Someone once asked me, no accident is safe? Obviously not, no accident is a result, accident and safety is not relative, and risk and safety is relative. Therefore, safety management is to prevent and control risks, so that no safety accidents or minimize the loss caused by accidents.
Security risk exists objectively. It exists at any time and in any space. How to control the risk more effectively is a permanent issue of security management. The following four aspects are my core experience of safety management.
First of all, to effectively control risk, accountability and rules and regulations are the guidelines. The Safety Production Law proposes that production and business units must establish and improve the safety production responsibility system and safety production rules and regulations for all employees. Safety is the lifeline of an enterprise. The full responsibility system and the preparation of rules and regulations must be realistic. The system requires that while fully implementing laws, regulations, standards and norms, it must also be operable within the enterprise. Only in this way, the whole system from the scope of responsibility to the inspection and assessment can be fully and effectively implemented. The full safety responsibility system must be horizontal to the side and vertical to the end. From every department to every person, the full responsibility must be compacted by the management, especially the responsibility content of key positions, and the frequency of training should be increased.
Secondly, safety education and training is an important way of risk control and a concrete manifestation of the implementation of "safety first, prevention first. According to survey statistics, more than 90% of accidents are caused by unsafe behaviors of people. Failure to operate in accordance with operating procedures, ignoring safety, ignoring warning signs, incorrect use of labor protection equipment, venturing into dangerous areas, etc. are all human unsafe behaviors, and the most important way to prevent these unsafe behaviors is education and training. In safety education and training, we must resolutely overcome the coping tasks such as "scripted" and "borrowlism"; we must use various forms and fresh content to stimulate the enthusiasm of employees, activate the atmosphere of education and training, and appropriately carry out award-winning contests and other activities to increase the enthusiasm of employees in training and achieve better training results. In addition, the daily management process should also regularly check and assess education and training, check whether the relevant departments are carried out as scheduled in accordance with the annual training plan, check the implementation of the three-level education of employees, and urge relevant departments and personnel to complete education and training through assessment. The cost of safety training is very low, but the cost of accidents is very high. Only by earnestly implementing education and training can the overall quality of the workforce be improved. When employees master the knowledge of safety production, their natural safety awareness will be improved, and the possibility of accidents will be greatly improved. Reduced.
Third, do a good job in risk classification control and hidden danger investigation and management, and build two firewalls for safe production. Risk identification is the basis of risk classification and control. Enterprises should improve the ability of employees to identify and control risks through training. They should participate in all employees, the whole process and all directions, and make a list for each post to fully identify. Safety management personnel should scientifically and rigorously analyze each hazardous material, each hazardous equipment and each operation activity, and accurately prevent and control them after classification. The second firewall, hidden danger investigation and management should be organically integrated with risk classification and control. Through risk analysis and evaluation results, a list of hidden danger investigation should be formulated, a hidden danger investigation plan should be prepared, and hidden danger management should be carried out after hidden danger investigation, so as to eliminate hidden dangers from the source or reduce the possibility of accidents.
Fourth, do a good job in emergency management. In recent years, a large part of the many major accidents that have occurred in China is that they have not done a good job in emergency management, companies have not conducted drills, do not understand the handling methods of abnormal working conditions, and employees lack emergency knowledge, which has caused major disasters and brought huge disasters to families. The grief has brought huge losses to the enterprise. Therefore, enterprises should strengthen emergency management, focusing on the management of the four stages of prevention, preparation, accident response and recovery. The emergency rescue plan should be taken as the core, and the whole process of management should be carried out for all kinds of dangerous situations, dangerous events and accidents from the construction of emergency team, emergency material reserve, personnel education and training, plan drill, danger warning to accident emergency disposal. Through emergency drills, the emergency response ability and evacuation speed of employees are tested, the cooperative combat ability and level of each emergency team are improved, and various operation safety precautions, scientific rescue methods and skills are mastered. At the same time, the feasibility of the emergency plan is also tested. Provide a basis for revising the plan. Therefore, only by doing a good job in emergency management can we be fearless in the face of danger, deal with chaos, and build the last line of defense for enterprises to secure production safety.
Safety management is the foundation of an enterprise. It is advisable to take precautions before rain and dig wells before thirst. As a safety manager, we must always be in awe of safety management, and constantly explore new safety management ideas with a never-slack spirit, so as to provide a solid guarantee for the sustainable development of enterprises. (Tian Chenhui)
More information
Jiang Xiaomeng Yunnan Jianfeng Lectures on Party Lessons
In order to implement the requirements of the higher-level party committee secretary to give in-depth party lectures in enterprises, on July 4, Jiang Xiaomeng, secretary of the party committee and chairman of the group company, gave a special lecture on "two studies and one doing" for party members at Yunnan Jianfeng Cement Company. In the lecture, Jiang Xiaomeng started from the background, overall requirements, learning and education content, and main measures of the "two studies and one doing" activities. He hoped that all party members and cadres would understand "awe, gratitude, humility, and decent", and put forward "What should the current enterprise do" and "How should the enterprise go in the future" and other issues. Jiang Xiaomeng analyzed the future development trend of cement and pharmaceutical industries in detail, emphasized the importance of seizing opportunities, and pointed out that with the homogenization of cement industry becoming more and more serious, if we want to take the road of differentiated brand development, the core of competition is to strengthen self management and maximize the cost, so as to improve the competitive advantage. As far as Yunnan Jianfeng is concerned, it is necessary to continuously improve the level of process technology management and increase the hourly output by increasing inspection efforts. Starting from strengthening the control of raw material procurement, the quality and price should be controlled. By strengthening sales management, vigorously develop direct agents, and strive to maximize the profit per ton; By strengthening equipment maintenance, reduce equipment accidents and further reduce the consumption of machine materials; Make good use of people, while constantly tapping talents and cultivating new people, we will gradually control the total number of workers and improve labor productivity. According to the current situation and the company's development strategy, what should the party members of the peak do? Jiang Xiaomeng asked all the party members and cadres of Yunnan peak to play a good vanguard and exemplary role and take the lead in learning new knowledge, new technology and new experience.
2020
07-30
Yunnan Peak Starts Secondary Security Standardization Creation
On June 19, Yunnan Jianfeng cement company held a mobilization meeting to further implement the requirements of the State Council, Yunnan Province, Pu'er City and Simao District Safety Supervision Bureau on carrying out safety production standardization work, and deploy the secondary safety standardization work. At the meeting, Liu Shenghua, deputy general manager of Yunnan Jianfeng, read out the requirements and work arrangements for creating a secondary enterprise for safety production standardization. The representative of Yunnan superstar Safety Technology Service Co., Ltd., the evaluation unit of safety production standardization, explained in detail the relevant knowledge of safety production standardization consultation and evaluation for the participants, and explained the requirements, standards and other elements of safety production standardization work. Zhou Jiping, general manager of Yunnan Jianfeng, mobilized the establishment of secondary safety production standardization at the meeting, requiring all workshops and departments to prepare and report the data before the end of October, and both software and hardware meet the acceptance conditions, so as to complete the bid creation work by the end of the year. Through the mobilization meeting, the responsible persons of Yunnan Jianfeng and superstar companies and relevant personnel had in-depth exchanges, further unified their thinking, and improved Yunnan Jianfeng employees' understanding of safety production standardization. Everyone recognizes that carrying out safety production standardization work is not only to implement the spirit of a series of documents of the party and the country, but also a mandatory requirement of the government for enterprises, and it is also the need for the sustainable and healthy development of enterprises themselves. Through the development of safety production standardization, enterprises can be promoted to establish and improve the safety production responsibility system, improve the safety production management system, standardize the production operation behavior, investigate and control the hidden dangers of accidents, effectively control the sources of danger, make the production equipment and facilities meet the safety standards, and continuously improve
2020
07-31
Yunnan Peak Starts Secondary Security Standardization Creation
On June 19, Yunnan Jianfeng cement company held a mobilization meeting to further implement the requirements of the State Council, Yunnan Province, Pu'er City and Simao District Safety Supervision Bureau on carrying out safety production standardization work, and deploy the secondary safety standardization work. At the meeting, Liu Shenghua, deputy general manager of Yunnan Jianfeng, read out the requirements and work arrangements for creating a secondary enterprise for safety production standardization. The representative of Yunnan superstar Safety Technology Service Co., Ltd., the evaluation unit of safety production standardization, explained in detail the relevant knowledge of safety production standardization consultation and evaluation for the participants, and explained the requirements, standards and other elements of safety production standardization work. Zhou Jiping, general manager of Yunnan Jianfeng, mobilized the establishment of secondary safety production standardization at the meeting, requiring all workshops and departments to prepare and report the data before the end of October, and both software and hardware meet the acceptance conditions, so as to complete the bid creation work by the end of the year. Through the mobilization meeting, the responsible persons of Yunnan Jianfeng and superstar companies and relevant personnel had in-depth exchanges, further unified their thinking, and improved Yunnan Jianfeng employees' understanding of safety production standardization. Everyone recognizes that carrying out safety production standardization work is not only to implement the spirit of a series of documents of the party and the country, but also a mandatory requirement of the government for enterprises, and it is also the need for the sustainable and healthy development of enterprises themselves. Through the development of safety production standardization, enterprises can be promoted to establish and improve the safety production responsibility system, improve the safety production management system, standardize the production operation behavior, investigate and control the hidden dangers of accidents, effectively control the sources of danger, make the production equipment and facilities meet the safety standards, and continuously improve
2020
07-31
Yunnan Peak Starts Secondary Security Standardization Creation
On June 19, Yunnan Jianfeng cement company held a mobilization meeting to further implement the requirements of the State Council, Yunnan Province, Pu'er City and Simao District Safety Supervision Bureau on carrying out safety production standardization work, and deploy the secondary safety standardization work. At the meeting, Liu Shenghua, deputy general manager of Yunnan Jianfeng, read out the requirements and work arrangements for creating a secondary enterprise for safety production standardization. The representative of Yunnan superstar Safety Technology Service Co., Ltd., the evaluation unit of safety production standardization, explained in detail the relevant knowledge of safety production standardization consultation and evaluation for the participants, and explained the requirements, standards and other elements of safety production standardization work. Zhou Jiping, general manager of Yunnan Jianfeng, mobilized the establishment of secondary safety production standardization at the meeting, requiring all workshops and departments to prepare and report the data before the end of October, and both software and hardware meet the acceptance conditions, so as to complete the bid creation work by the end of the year. Through the mobilization meeting, the responsible persons of Yunnan Jianfeng and superstar companies and relevant personnel had in-depth exchanges, further unified their thinking, and improved Yunnan Jianfeng employees' understanding of safety production standardization. Everyone recognizes that carrying out safety production standardization work is not only to implement the spirit of a series of documents of the party and the country, but also a mandatory requirement of the government for enterprises, and it is also the need for the sustainable and healthy development of enterprises themselves. Through the development of safety production standardization, enterprises can be promoted to establish and improve the safety production responsibility system, improve the safety production management system, standardize the production operation behavior, investigate and control the hidden dangers of accidents, effectively control the sources of danger, make the production equipment and facilities meet the safety standards, and continuously improve
2020
07-30
The Company shall organize special operation safety management training
What kind of management process is needed for the special operation permit? How to manage the ticket of the special operation permit? What are the contents of the eight kinds of special operations?... On June 17, the safety committee of the group company organized a special lecture on safety production to conduct systematic and comprehensive training on the safety management knowledge of special operations. The trainer invited for this training is Ge Zhengliang, head of EHS (Environmental Environment, Health Health, Safety) of Zhejiang Prodbang Pharmaceutical Co., Ltd. He has many years of experience in enterprise safety production management and is also a well-known safety management expert in Jinhua region. He has participated in the enterprise safety and environmental protection inspection organized by Jinhua Safety Supervision Bureau for many times and has a certain understanding of the situation of major enterprises in the peak. In this lecture, Ge Zhengliang divided into four parts: division of special operation license scope, special operation license management process, special operation license ticket management, and eight major types of special operation contents. Combined with relevant laws and regulations and his own practical experience in safety production management, Ge Zhengliang explained in simple terms eight special operation situations such as hot work, hoisting, high place, temporary power consumption, open circuit, blind plate plugging, restricted space, etc, standardize the licensed business division, approval department, the places to be paid attention to in the approval management of each type of operation, the responsibilities of the relevant approval department, the matters needing attention in on-site operation, the approval process, ticket management and other knowledge, and make a detailed description of the relevant special operation contents according to the working characteristics of peak subordinate enterprises. In addition, he also shared the experience of special operation safety management of Plo Pharmaceutical.
2020
07-31
Yunnan Jianfeng won the honor of "key leading enterprise in Pu'er City"
Recently, Yunnan Jianfeng Cement Company was awarded the honorary title of "2016 Pu'er Key Leading Enterprise" by the Pu'er Municipal Party Committee and Municipal Government. In recent years, according to the requirements of the group company's "three reductions and three improvements", Yunnan Jianfeng has focused on internal management and external market expansion, tried every means to reduce costs in production, timely controlled market trends in sales, and constantly refreshed various business indicators. While striving to create its own brand value, Yunnan Jianfeng always regards giving back to the society and serving local development as its own responsibility and obligation. Since the establishment of the company, Yunnan Jianfeng has actively responded to the government's call to support the construction of poor border areas and provide free cement to some poor people. Support the education construction in border areas and donate funds for students in need. At the same time, it has paid various taxes and fees on time in accordance with the law and has become a major profit and tax producer in Pu'er City for years. It has gradually grown from a new cement enterprise in Pu'er area to a leading enterprise in the cement industry. The honor of "key leading enterprises in Pu'er City in 2016" is the affirmation and recognition of Yunnan Jianfeng's work over the past few years by the local government and society. During the "Thirteenth Five-Year Plan" period, southwestern Yunnan is about to usher in an explosive stage of development. The construction of international railway projects, the construction of border expressway projects, the construction of airport projects and the construction of people's livelihood projects will all start this year. The acquisition of the honorary title of "Key Leading Enterprise in Pu'er City in 2016" will also provide strong support for Yunnan Jianfeng to strive for the right to supply these projects. (Li Yun)
2020
07-31