Enterprise Shortwave
Release time:
2023-07-11
Huang Ping Jianfeng Cites Clinker Mineralizer to Achieve Preliminary Results
After more than two months of production verification, Huang Ping Jianfeng Cement Company Cites Clinker Mineralizer to Achieve Preliminary Results. Since
Huang Ping Jianfeng was put into production, it has been using manual analysis to restrict relevant oxides to control the fluctuation of clinker performance, and the effect is not satisfactory. For this reason, the company visited peer enterprises in many ways to "learn from" and conducted a scheme demonstration of adding mineralizer to stabilize clinker performance in early April, clarifying the responsible department and the time node for relevant work to advance. The quality inspection department starts the detection method and addition amount and method of mineralization agent, the manufacturing department analyzes the mechanism of mineralization agent generation and formulates production control parameters to facilitate the effective control of relevant production personnel, procurement to ensure the supply of raw materials and possible emergency raw material adjustment. After the production verification in May and June, the addition of mineralizer initially achieved the expected goals of improving clinker burnability, reducing clinker coal consumption and improving clinker strength, and determined the effective addition amount of mineralizer. Due to the combined effect of the mineralizer, the use of the most expensive iron raw material in the raw material ingredient correction is also reduced, reducing production costs. (Huang Xuguang)
Crane Operation Changed from Wired to Wireless
Recently, Guizhou Huang Ping Jianfeng changed the whole factory crane from wired to wireless.
Due to the limitation of operation field of vision and the influence of convenience, one person is required to operate the crane when working with wired crane, and the other person is required to observe the situation and command near the lifting items, which is prone to lifting accidents. After the modification is completed, the crane is equipped with a wireless remote control, and only one person is required to complete the operation and command work. In terms of safety, the crane equipped with a wireless remote controller is not affected by the operating position, and can be moved at will and away from the hoisting object to observe the situation, which greatly reduces the incidence of accidents. (Pan Chaochun)
Daye Peak Raw Material Span Band Analyzer Added Neutron Radioactive Source
On June 12, Daye Peak Cement Company used the working gap of the raw material roller press to add neutron radioactive source to the raw material span band analyzer.
Daye Peak Raw Material Cross-band Analyzer has been in normal operation for more than 3 years. Neutron radioactive source is the core part of cross-band analyzer detection, and its normal decay period is 2.5 years. In order to ensure the reliability of data detection of this equipment and the stability of raw material ingredients, Daye Peak will start to handle the declaration of radioactive source and other related procedures at the end of 2022. On June 10, after the neutron radioactive source arrived, daye peak contacted the manufacturer to arrange the installation of neutron source and static calibration of standard sample according to the production schedule, so as to ensure the effective operation of cross-band analyzer and the stability of raw material ingredient quality. (Chen Cui, Hong, Wen Bo)
Daye Peak Completed Reconstruction of Cement Bottom Crushing Valve
On June 14, Daye Peak Cement Company successfully completed installation and reconstruction of cement bottom crushing valve.
Cement will agglomerate during storage, causing blockage of the blanking port, which not only affects the efficiency of cement distribution, but also poses certain safety risks during blockage removal. When the driver of the bulk truck loads the truck, if the screen filter block is not used as required, once the cement block enters the bulk tanker, it will block the ash pipeline, increasing the workload and safety risks to the driver. For this reason, Daye Peak carried out the transformation of the bottom crushing valve of the cement depot, which completely eliminated the problems of blocking the depot and blocking the ash pipeline from the source, and also eliminated the safety risk of blocking from the root. (Huang Bide, Chen Cuihong)
Daye Peak Loading Road Dust Collection One-to-Two Renovation
In order to optimize site management, reduce the workload of site employees and reduce the production energy consumption target, on June 23, Daye Peak Cement Company completed the dust collection one-to-two renovation of the loading road.
Daye Peak Packaging Machine 1
# Parallel Belt Chute Dust Point Dust was originally collected by a filter cartridge dust collector. Due to the non-continuous distribution of bagged cement, in order to save power consumption, there are frequent startup and shutdown, and the maintenance time of filter cartridge dust collection is long, and the maintenance of filter cartridge dust collection is not as convenient as that of cloth bag dust collection. After the transformation is completed, the dust collection of the loading lane is controlled by the bag dust collection, and the air supply can fully meet the dust collection requirements of the loading lane loading and parallel belt chute, achieving the purpose of optimizing management and reducing power consumption. After the renovation is completed, not only the workload of on-site staff is reduced, but also the annual electricity bill can be saved by about 50000 yuan. (Chen Cuihong and Huang Bide)Shanghai Customer Visits Peak Cable
On June 20, a group of four from a Shanghai customer visited Peak Cable Company to discuss technical issues related to the B1 bunched combustion performance of communication cables.
More information
Tianjin Flemish Company Donates Anti-epidemic Materials
On the morning of July 13, Tianjin Jianfeng Flanders Pharmaceutical Technology Development Co., Ltd. donated materials to the Tianjin Development Zone Charity Association to help the development zone community fight the epidemic.
2020
08-05
In late July, leaders of the group company Jiang Xiaomeng, Yu Jianhong, Chen Tianci and Qin Xuping visited subordinate enterprises separately and sent heatstroke prevention and cooling supplies to employees working under high temperature, urging everyone to pay attention to heatstroke prevention and cooling and safe production work to ensure good physical condition.
2020
08-05
On July 17 and 18, the Group's work analysis meeting for the first half of 2020 was held at the Peak Building of the Group's headquarters to summarize and review the work in the first half of the year and make arrangements for the work in the second half of the year.
2020
08-05
The company requires to do a good job in summer safety production
The high temperature season is approaching, and the group company issued a notice a few days ago to make arrangements for safe production in summer.
2020
08-05
The company requires to do a good job in summer safety production
The high temperature season is approaching, and the group company issued a notice a few days ago to make arrangements for safe production in summer. The notice requires all subordinate units of the company to attach great importance to the work of production safety in summer, and all production and business units should hold a special meeting on production safety in summer. According to the characteristics of production in summer, they should focus on safety risk analysis for mines, outdoor operations and high-temperature posts, and implement control measures to avoid the occurrence of safety accidents such as scalding, heatstroke and electric shock. In order to further strengthen the safety production management in the high temperature season, the notice requires the main person in charge of each production and business unit to lead a team to conduct a comprehensive inspection of the production and business premises according to the characteristics of summer production; strengthen the daily safety production inspection of key posts and special posts; timely rectify the found unsafe behaviors and hidden dangers; Strengthen the management of the storage and use of flammable, explosive, dangerous chemicals and drugs; cooling measures shall be taken for the space exceeding the storage temperature limit of articles. If it is found that the electrical equipment circuit and exhaust fan circuit are aged and damaged, replace them in time and keep the grounding wire in good condition. Do a good job in checking the fire pool, pipeline water pressure and fire extinguishing equipment to ensure that the fire fighting facilities are sensitive, intact and reliable. The high temperature in summer is also a period of frequent occurrence of heatstroke and other diseases. The notice requires all units to do a good job in heatstroke prevention and cooling, implement various relevant measures, and equip necessary cooling facilities or materials such as fans, air conditioners, ice cubes and other cooling facilities or materials according to the conditions of the production site; do a good job in the distribution of heatstroke prevention drugs, supplies and cool drinks in workshops, warehouses, construction sites and other production lines; strengthen canteen management to prevent food poisoning. (this newspaper reporter)
2020
07-22
The company requires to do a good job in summer safety production
The high temperature season is approaching, and the group company issued a notice a few days ago to make arrangements for safe production in summer. The notice requires all subordinate units of the company to attach great importance to the work of production safety in summer, and all production and business units should hold a special meeting on production safety in summer. According to the characteristics of production in summer, they should focus on safety risk analysis for mines, outdoor operations and high-temperature posts, and implement control measures to avoid the occurrence of safety accidents such as scalding, heatstroke and electric shock. In order to further strengthen the safety production management in the high temperature season, the notice requires the main person in charge of each production and business unit to lead a team to conduct a comprehensive inspection of the production and business premises according to the characteristics of summer production; strengthen the daily safety production inspection of key posts and special posts; timely rectify the found unsafe behaviors and hidden dangers; Strengthen the management of the storage and use of flammable, explosive, dangerous chemicals and drugs; cooling measures shall be taken for the space exceeding the storage temperature limit of articles. If it is found that the electrical equipment circuit and exhaust fan circuit are aged and damaged, replace them in time and keep the grounding wire in good condition. Do a good job in checking the fire pool, pipeline water pressure and fire extinguishing equipment to ensure that the fire fighting facilities are sensitive, intact and reliable. The high temperature in summer is also a period of frequent occurrence of heatstroke and other diseases. The notice requires all units to do a good job in heatstroke prevention and cooling, implement various relevant measures, and equip necessary cooling facilities or materials such as fans, air conditioners, ice cubes and other cooling facilities or materials according to the conditions of the production site; do a good job in the distribution of heatstroke prevention drugs, supplies and cool drinks in workshops, warehouses, construction sites and other production lines; strengthen canteen management to prevent food poisoning. (this newspaper reporter)
2020
07-31