Enterprise Shortwave
Release time:
2023-07-11
Huang Ping Jianfeng Cites Clinker Mineralizer to Achieve Preliminary Results
After more than two months of production verification, Huang Ping Jianfeng Cement Company Cites Clinker Mineralizer to Achieve Preliminary Results. Since
Huang Ping Jianfeng was put into production, it has been using manual analysis to restrict relevant oxides to control the fluctuation of clinker performance, and the effect is not satisfactory. For this reason, the company visited peer enterprises in many ways to "learn from" and conducted a scheme demonstration of adding mineralizer to stabilize clinker performance in early April, clarifying the responsible department and the time node for relevant work to advance. The quality inspection department starts the detection method and addition amount and method of mineralization agent, the manufacturing department analyzes the mechanism of mineralization agent generation and formulates production control parameters to facilitate the effective control of relevant production personnel, procurement to ensure the supply of raw materials and possible emergency raw material adjustment. After the production verification in May and June, the addition of mineralizer initially achieved the expected goals of improving clinker burnability, reducing clinker coal consumption and improving clinker strength, and determined the effective addition amount of mineralizer. Due to the combined effect of the mineralizer, the use of the most expensive iron raw material in the raw material ingredient correction is also reduced, reducing production costs. (Huang Xuguang)
Crane Operation Changed from Wired to Wireless
Recently, Guizhou Huang Ping Jianfeng changed the whole factory crane from wired to wireless.
Due to the limitation of operation field of vision and the influence of convenience, one person is required to operate the crane when working with wired crane, and the other person is required to observe the situation and command near the lifting items, which is prone to lifting accidents. After the modification is completed, the crane is equipped with a wireless remote control, and only one person is required to complete the operation and command work. In terms of safety, the crane equipped with a wireless remote controller is not affected by the operating position, and can be moved at will and away from the hoisting object to observe the situation, which greatly reduces the incidence of accidents. (Pan Chaochun)
Daye Peak Raw Material Span Band Analyzer Added Neutron Radioactive Source
On June 12, Daye Peak Cement Company used the working gap of the raw material roller press to add neutron radioactive source to the raw material span band analyzer.
Daye Peak Raw Material Cross-band Analyzer has been in normal operation for more than 3 years. Neutron radioactive source is the core part of cross-band analyzer detection, and its normal decay period is 2.5 years. In order to ensure the reliability of data detection of this equipment and the stability of raw material ingredients, Daye Peak will start to handle the declaration of radioactive source and other related procedures at the end of 2022. On June 10, after the neutron radioactive source arrived, daye peak contacted the manufacturer to arrange the installation of neutron source and static calibration of standard sample according to the production schedule, so as to ensure the effective operation of cross-band analyzer and the stability of raw material ingredient quality. (Chen Cui, Hong, Wen Bo)
Daye Peak Completed Reconstruction of Cement Bottom Crushing Valve
On June 14, Daye Peak Cement Company successfully completed installation and reconstruction of cement bottom crushing valve.
Cement will agglomerate during storage, causing blockage of the blanking port, which not only affects the efficiency of cement distribution, but also poses certain safety risks during blockage removal. When the driver of the bulk truck loads the truck, if the screen filter block is not used as required, once the cement block enters the bulk tanker, it will block the ash pipeline, increasing the workload and safety risks to the driver. For this reason, Daye Peak carried out the transformation of the bottom crushing valve of the cement depot, which completely eliminated the problems of blocking the depot and blocking the ash pipeline from the source, and also eliminated the safety risk of blocking from the root. (Huang Bide, Chen Cuihong)
Daye Peak Loading Road Dust Collection One-to-Two Renovation
In order to optimize site management, reduce the workload of site employees and reduce the production energy consumption target, on June 23, Daye Peak Cement Company completed the dust collection one-to-two renovation of the loading road.
Daye Peak Packaging Machine 1
# Parallel Belt Chute Dust Point Dust was originally collected by a filter cartridge dust collector. Due to the non-continuous distribution of bagged cement, in order to save power consumption, there are frequent startup and shutdown, and the maintenance time of filter cartridge dust collection is long, and the maintenance of filter cartridge dust collection is not as convenient as that of cloth bag dust collection. After the transformation is completed, the dust collection of the loading lane is controlled by the bag dust collection, and the air supply can fully meet the dust collection requirements of the loading lane loading and parallel belt chute, achieving the purpose of optimizing management and reducing power consumption. After the renovation is completed, not only the workload of on-site staff is reduced, but also the annual electricity bill can be saved by about 50000 yuan. (Chen Cuihong and Huang Bide)Shanghai Customer Visits Peak Cable
On June 20, a group of four from a Shanghai customer visited Peak Cable Company to discuss technical issues related to the B1 bunched combustion performance of communication cables.
More information
In the eastern corner of the production area of Jianfeng Health Technology Company, there is a very inconspicuous building. From below, only a few pipes of uneven thickness can be seen on the top and the slogan "Focus on Environmental Protection and Promote Sustainable Development" with red letters on the yellow background on the stainless steel guardrail. Walking up, you can only see several closed pools and a small room with stacks of documents, test tubes, glass bottles and other testing tools on the table. This is the peak and healthy sewage treatment station. The production sewage of the whole factory area is concentrated here. After adjustment (PH adjustment), pre-acidification, anaerobic, anoxic, aerobic (aeration), precipitation and other links, it is discharged into the pipe network after reaching the special discharge standard. Yin Zhiwu, executive deputy general manager of Jianfeng Health, said that because the sewage treatment station in Wucheng District has not yet been built, Jianfeng Health has not yet been able to achieve pipe discharge, and the relevant national laws have strict requirements on the discharge of water pollutants from the extraction pharmaceutical industry. Sewage discharge must reach a special discharge limit, that is, chemical oxygen demand (COD) must be less than 50 mg/L. Enterprise development and environmental protection are both the concept of peak health since its establishment. In March this year, on the basis of the original environmental protection facilities, Jianfeng Health carried out technical renovation of waste gas collection and treatment facilities, and at the same time installed a sealing cover on the sewage treatment station to realize the closed collection of waste gas. Since the trial operation of this facility in mid-May, the overall effect has been obvious. The original treatment tank would emit an unpleasant smell during work, but now the smell has been significantly reduced. Compared with the young enterprise of peak health, the relatively "older" peak pharmaceutical has more experience in sewage treatment and environmental protection. Akihama
2020
07-31
2016 Annual General Meeting of Shareholders
News from our newspaper On May 19, the on-site meeting of Jianfeng Group's 2016 Annual General Meeting of Shareholders was held in Conference Room 314 of Jianfeng Building to deliberate and pass the "2016 Annual Report on the Work of the Board of Directors" and other proposals. The meeting was convened by the board of directors of Jianfeng Group and chaired by Chairman Jiang Xiaomeng. A total of 6 shareholders and proxies attended the meeting, and the total number of voting shares held by them was 55,604,815, accounting for 16.16 of the total voting shares of the company. Some directors, supervisors and secretary of the board of directors of the company attended the meeting, and some senior managers attended the meeting as nonvoting delegates. The meeting was held and voted on by a combination of on-site voting and online voting, it deliberated and passed nine proposals, including the 2016 Work Report of the Board of Directors, the 2016 Work Report of the Board of Supervisors, the 2016 Financial Final Accounts Report, the 2016 Profit Distribution Proposal, the Proposal to Hire the Company's 2017 Audit Institution, the Proposal to Provide Guarantee to Holding Subsidiaries, the 2016 Annual Report and its Summary, the Election of Mr. Huang Sujian as Director of the Company and the Election of Mr. Chen Tianci as Supervisor of the Company. (Zhou Hengbin)
2020
07-31
2016 Annual General Meeting of Shareholders
News from our newspaper On May 19, the on-site meeting of Jianfeng Group's 2016 Annual General Meeting of Shareholders was held in Conference Room 314 of Jianfeng Building to deliberate and pass the "2016 Annual Report on the Work of the Board of Directors" and other proposals. The meeting was convened by the board of directors of Jianfeng Group and chaired by Chairman Jiang Xiaomeng. A total of 6 shareholders and proxies attended the meeting, and the total number of voting shares held by them was 55,604,815, accounting for 16.16 of the total voting shares of the company. Some directors, supervisors and secretary of the board of directors of the company attended the meeting, and some senior managers attended the meeting as nonvoting delegates. The meeting was held and voted on by a combination of on-site voting and online voting, it deliberated and passed nine proposals, including the 2016 Work Report of the Board of Directors, the 2016 Work Report of the Board of Supervisors, the 2016 Financial Final Accounts Report, the 2016 Profit Distribution Proposal, the Proposal to Hire the Company's 2017 Audit Institution, the Proposal to Provide Guarantee to Holding Subsidiaries, the 2016 Annual Report and its Summary, the Election of Mr. Huang Sujian as Director of the Company and the Election of Mr. Chen Tianci as Supervisor of the Company. (Zhou Hengbin)
2020
07-31
2016 Annual General Meeting of Shareholders
News from our newspaper On May 19, the on-site meeting of Jianfeng Group's 2016 Annual General Meeting of Shareholders was held in Conference Room 314 of Jianfeng Building to deliberate and pass the "2016 Annual Report on the Work of the Board of Directors" and other proposals. The meeting was convened by the board of directors of Jianfeng Group and chaired by Chairman Jiang Xiaomeng. A total of 6 shareholders and proxies attended the meeting, and the total number of voting shares held by them was 55,604,815, accounting for 16.16 of the total voting shares of the company. Some directors, supervisors and secretary of the board of directors of the company attended the meeting, and some senior managers attended the meeting as nonvoting delegates. The meeting was held and voted on by a combination of on-site voting and online voting, it deliberated and passed nine proposals, including the 2016 Work Report of the Board of Directors, the 2016 Work Report of the Board of Supervisors, the 2016 Financial Final Accounts Report, the 2016 Profit Distribution Proposal, the Proposal to Hire the Company's 2017 Audit Institution, the Proposal to Provide Guarantee to Holding Subsidiaries, the 2016 Annual Report and its Summary, the Election of Mr. Huang Sujian as Director of the Company and the Election of Mr. Chen Tianci as Supervisor of the Company. (Zhou Hengbin)
2020
07-30
Jianfeng Pharmaceutical Won Advanced Collective of Municipal Red Cross Humanitarian Promotion Award
On April 24, the Red Cross Society of Jinhua issued a circular commending the advanced units and individuals of the 2016 Red Cross Humanitarian Promotion Award. Peak Pharmaceutical Company won the Red Cross Humanitarian Promotion Award for Advanced Collective. The Red Cross is a social relief organization engaged in humanitarian work, with the purpose of carrying forward the spirit of humanity, fraternity and dedication, protecting human life and health, and promoting the cause of peace and progress of mankind. As a socially responsible enterprise, Jianfeng Pharmaceutical has always attached importance to public welfare and charity work, vigorously promoted the spirit of the Red Cross, and vigorously supported the work of the Red Cross with practical actions. In September 2016, at the theme publicity activity of "World First Aid Day" and the opening ceremony of the municipal Red Cross emergency rescue station (point), Huang Jinlong, deputy general manager of the group company and general manager of the pharmaceutical company, donated 6 AEDs known as "life-saving artifact" to the Red Cross on behalf of Jianfeng Pharmaceutical, it is equipped with six Red Cross emergency rescue service stations (points), namely, Jinhua high-speed railway station, sports center, cultural center, Shuanglong scenic spot, Siping village scenic spot and Suoyuan village scenic spot. The configuration of AED equipment has played a very good role in improving the emergency rescue capacity of Jinhua's key locations, and has been affirmed by the Red Cross and related units. (Spike Pharmaceuticals)
2020
07-31
Jingmai Airport Test Flight Successfully Runway Cement Spike Manufacturing
On April 7, a Boeing 737-700 aircraft of China Eastern Airlines Yunnan took off from Kunming. After completing two flight test subjects, it landed safely at Lancang Jingmai Airport. This not only marked the basic completion of the airport flight area, The official start of the test flight also marked that the "Peak" brand airport runway cement passed the first "final exam". Lancang Jingmai Airport is a major project with milestone significance in the history of Pu'er transportation construction. Since then, an air corridor connecting southwest Yunnan and Southeast Asia has been added between Kunming and Pu'er, which will greatly promote the development and utilization of tourism resources in Lancang, Menglian and Ximeng "Pu'er Green Triangle" area, and promote the sustainable development of local economy and society; it is of great significance to strengthen the city's national defense construction, maintain border stability, promote national unity, improve emergency rescue capabilities, and promote Pu'er's integration into the country's "Belt and Road" construction. Since the start of the construction of the airport, Yunnan Jianfeng has been paying close attention to it, organizing technical research and repeated tests, and finally produced high-quality airport runway special cement, and with excellent product quality, superior product performance and high-quality service, it has become a runway for Lancang Airport. Cement manufacturer. This not only fills the gap of "peak" airport special cement, but also is of great significance to promote the "peak" brand and improve the market influence of enterprises. It is understood that Jingmai Airport is initially confirmed to be officially opened to traffic at the end of May. (Li Liangping)
2020
07-31