Enterprise Shortwave
Release time:
2023-07-11
Huang Ping Jianfeng Cites Clinker Mineralizer to Achieve Preliminary Results
After more than two months of production verification, Huang Ping Jianfeng Cement Company Cites Clinker Mineralizer to Achieve Preliminary Results. Since
Huang Ping Jianfeng was put into production, it has been using manual analysis to restrict relevant oxides to control the fluctuation of clinker performance, and the effect is not satisfactory. For this reason, the company visited peer enterprises in many ways to "learn from" and conducted a scheme demonstration of adding mineralizer to stabilize clinker performance in early April, clarifying the responsible department and the time node for relevant work to advance. The quality inspection department starts the detection method and addition amount and method of mineralization agent, the manufacturing department analyzes the mechanism of mineralization agent generation and formulates production control parameters to facilitate the effective control of relevant production personnel, procurement to ensure the supply of raw materials and possible emergency raw material adjustment. After the production verification in May and June, the addition of mineralizer initially achieved the expected goals of improving clinker burnability, reducing clinker coal consumption and improving clinker strength, and determined the effective addition amount of mineralizer. Due to the combined effect of the mineralizer, the use of the most expensive iron raw material in the raw material ingredient correction is also reduced, reducing production costs. (Huang Xuguang)
Crane Operation Changed from Wired to Wireless
Recently, Guizhou Huang Ping Jianfeng changed the whole factory crane from wired to wireless.
Due to the limitation of operation field of vision and the influence of convenience, one person is required to operate the crane when working with wired crane, and the other person is required to observe the situation and command near the lifting items, which is prone to lifting accidents. After the modification is completed, the crane is equipped with a wireless remote control, and only one person is required to complete the operation and command work. In terms of safety, the crane equipped with a wireless remote controller is not affected by the operating position, and can be moved at will and away from the hoisting object to observe the situation, which greatly reduces the incidence of accidents. (Pan Chaochun)
Daye Peak Raw Material Span Band Analyzer Added Neutron Radioactive Source
On June 12, Daye Peak Cement Company used the working gap of the raw material roller press to add neutron radioactive source to the raw material span band analyzer.
Daye Peak Raw Material Cross-band Analyzer has been in normal operation for more than 3 years. Neutron radioactive source is the core part of cross-band analyzer detection, and its normal decay period is 2.5 years. In order to ensure the reliability of data detection of this equipment and the stability of raw material ingredients, Daye Peak will start to handle the declaration of radioactive source and other related procedures at the end of 2022. On June 10, after the neutron radioactive source arrived, daye peak contacted the manufacturer to arrange the installation of neutron source and static calibration of standard sample according to the production schedule, so as to ensure the effective operation of cross-band analyzer and the stability of raw material ingredient quality. (Chen Cui, Hong, Wen Bo)
Daye Peak Completed Reconstruction of Cement Bottom Crushing Valve
On June 14, Daye Peak Cement Company successfully completed installation and reconstruction of cement bottom crushing valve.
Cement will agglomerate during storage, causing blockage of the blanking port, which not only affects the efficiency of cement distribution, but also poses certain safety risks during blockage removal. When the driver of the bulk truck loads the truck, if the screen filter block is not used as required, once the cement block enters the bulk tanker, it will block the ash pipeline, increasing the workload and safety risks to the driver. For this reason, Daye Peak carried out the transformation of the bottom crushing valve of the cement depot, which completely eliminated the problems of blocking the depot and blocking the ash pipeline from the source, and also eliminated the safety risk of blocking from the root. (Huang Bide, Chen Cuihong)
Daye Peak Loading Road Dust Collection One-to-Two Renovation
In order to optimize site management, reduce the workload of site employees and reduce the production energy consumption target, on June 23, Daye Peak Cement Company completed the dust collection one-to-two renovation of the loading road.
Daye Peak Packaging Machine 1
# Parallel Belt Chute Dust Point Dust was originally collected by a filter cartridge dust collector. Due to the non-continuous distribution of bagged cement, in order to save power consumption, there are frequent startup and shutdown, and the maintenance time of filter cartridge dust collection is long, and the maintenance of filter cartridge dust collection is not as convenient as that of cloth bag dust collection. After the transformation is completed, the dust collection of the loading lane is controlled by the bag dust collection, and the air supply can fully meet the dust collection requirements of the loading lane loading and parallel belt chute, achieving the purpose of optimizing management and reducing power consumption. After the renovation is completed, not only the workload of on-site staff is reduced, but also the annual electricity bill can be saved by about 50000 yuan. (Chen Cuihong and Huang Bide)Shanghai Customer Visits Peak Cable
On June 20, a group of four from a Shanghai customer visited Peak Cable Company to discuss technical issues related to the B1 bunched combustion performance of communication cables.
More information
The company's vocational skill level independently identifies two new occupations
A few days ago, after the examination and approval of the Jinhua Municipal Bureau of Human Resources and Social Security, and reported to the Provincial Department of Human Resources and Social Security for examination and filing, Jianfeng Group's independent identification level of vocational skills was based on last year. Two new occupations (types of work) are chemical inspectors and organic synthesis workers.
2022
05-20
On May 12, Cai Xiaochun, deputy secretary of the Party group of Zhejiang Federation of industry and commerce, and his party visited Jianfeng group for investigation, visited Jinxi factory area of Jianfeng pharmaceutical factory and Jinxi internationalization project site, and had a discussion with Jiang Xiaomeng, chairman of the group company, Huang Jinlong, deputy general manager of the group company and general manager of the pharmaceutical company.
2022
05-20
On the afternoon of April 6, Jiang Xiaomeng, chairman of the group company, was invited to participate in the Jinhua News Client Financial Media Interview column "Night Talk of the Two Sessions", as a representative of the Jinhua Municipal People's Congress, to talk about suggestions for the future development of Jinhua enterprises. As the chairman of the Jinhua City Federation of Industry and Commerce, Jiang Xiaomeng has a personal experience of various problems encountered in the development of Jinhua enterprises. After careful investigation and full preparation, he put forward two proposals on strengthening the empowerment and allocation of production factors and further enhancing the market competitiveness of enterprises in our city and further promoting the compliance construction of private enterprises in our city and reducing the risk of enterprise operation. In the "two sessions night talk" interview, he put forward his own views on these two topics.
2022
04-12
Group Companies Commend 2021 Advanced
On the morning of January 26, the group company held the 2021 annual summary commendation meeting to review the work of the previous year, make arrangements for the work of 2022, sign the 2022 economic responsibility system with various professional companies and directly affiliated enterprises, and solemnly commend the 2021 advanced collectives and individuals.
2022
02-08
Group Company Convenes Workers' Representative and Trade Union Member Representative Conference
The group company held a representative meeting of staff representatives and trade union members, elected members of the eighth trade union committee and members of various special committees, and Shi Fu was elected chairman of the eighth trade union of the group trade union.
2022
02-08
The group company held an annual safety and environmental protection work conference to comprehensively summarize and review the safety and environmental protection work in 2021, make arrangements for the safety and environmental protection work in 2022, and sign the safety and environmental protection work responsibility system.
2022
02-08
Contact Us
No. 88 Wujiang East Road, Jinhua City, Zhejiang Province, China
Tel: +86-579-82326868
Fax : +86-579-82324666
©2023 Zhejiang Jianfeng Group Co., Ltd. Powered by: www.300.cn SEO Business License
SAF Coolest v1.2 设置面板 SHJSS-AHDB-FSSQE-ZSW
无数据提示
Sorry, the current column has no content !
You can view other columns or return to Home Page