Enterprise Shortwave
Release time:
2023-07-11
Huang Ping Jianfeng Cites Clinker Mineralizer to Achieve Preliminary Results
After more than two months of production verification, Huang Ping Jianfeng Cement Company Cites Clinker Mineralizer to Achieve Preliminary Results. Since
Huang Ping Jianfeng was put into production, it has been using manual analysis to restrict relevant oxides to control the fluctuation of clinker performance, and the effect is not satisfactory. For this reason, the company visited peer enterprises in many ways to "learn from" and conducted a scheme demonstration of adding mineralizer to stabilize clinker performance in early April, clarifying the responsible department and the time node for relevant work to advance. The quality inspection department starts the detection method and addition amount and method of mineralization agent, the manufacturing department analyzes the mechanism of mineralization agent generation and formulates production control parameters to facilitate the effective control of relevant production personnel, procurement to ensure the supply of raw materials and possible emergency raw material adjustment. After the production verification in May and June, the addition of mineralizer initially achieved the expected goals of improving clinker burnability, reducing clinker coal consumption and improving clinker strength, and determined the effective addition amount of mineralizer. Due to the combined effect of the mineralizer, the use of the most expensive iron raw material in the raw material ingredient correction is also reduced, reducing production costs. (Huang Xuguang)
Crane Operation Changed from Wired to Wireless
Recently, Guizhou Huang Ping Jianfeng changed the whole factory crane from wired to wireless.
Due to the limitation of operation field of vision and the influence of convenience, one person is required to operate the crane when working with wired crane, and the other person is required to observe the situation and command near the lifting items, which is prone to lifting accidents. After the modification is completed, the crane is equipped with a wireless remote control, and only one person is required to complete the operation and command work. In terms of safety, the crane equipped with a wireless remote controller is not affected by the operating position, and can be moved at will and away from the hoisting object to observe the situation, which greatly reduces the incidence of accidents. (Pan Chaochun)
Daye Peak Raw Material Span Band Analyzer Added Neutron Radioactive Source
On June 12, Daye Peak Cement Company used the working gap of the raw material roller press to add neutron radioactive source to the raw material span band analyzer.
Daye Peak Raw Material Cross-band Analyzer has been in normal operation for more than 3 years. Neutron radioactive source is the core part of cross-band analyzer detection, and its normal decay period is 2.5 years. In order to ensure the reliability of data detection of this equipment and the stability of raw material ingredients, Daye Peak will start to handle the declaration of radioactive source and other related procedures at the end of 2022. On June 10, after the neutron radioactive source arrived, daye peak contacted the manufacturer to arrange the installation of neutron source and static calibration of standard sample according to the production schedule, so as to ensure the effective operation of cross-band analyzer and the stability of raw material ingredient quality. (Chen Cui, Hong, Wen Bo)
Daye Peak Completed Reconstruction of Cement Bottom Crushing Valve
On June 14, Daye Peak Cement Company successfully completed installation and reconstruction of cement bottom crushing valve.
Cement will agglomerate during storage, causing blockage of the blanking port, which not only affects the efficiency of cement distribution, but also poses certain safety risks during blockage removal. When the driver of the bulk truck loads the truck, if the screen filter block is not used as required, once the cement block enters the bulk tanker, it will block the ash pipeline, increasing the workload and safety risks to the driver. For this reason, Daye Peak carried out the transformation of the bottom crushing valve of the cement depot, which completely eliminated the problems of blocking the depot and blocking the ash pipeline from the source, and also eliminated the safety risk of blocking from the root. (Huang Bide, Chen Cuihong)
Daye Peak Loading Road Dust Collection One-to-Two Renovation
In order to optimize site management, reduce the workload of site employees and reduce the production energy consumption target, on June 23, Daye Peak Cement Company completed the dust collection one-to-two renovation of the loading road.
Daye Peak Packaging Machine 1
# Parallel Belt Chute Dust Point Dust was originally collected by a filter cartridge dust collector. Due to the non-continuous distribution of bagged cement, in order to save power consumption, there are frequent startup and shutdown, and the maintenance time of filter cartridge dust collection is long, and the maintenance of filter cartridge dust collection is not as convenient as that of cloth bag dust collection. After the transformation is completed, the dust collection of the loading lane is controlled by the bag dust collection, and the air supply can fully meet the dust collection requirements of the loading lane loading and parallel belt chute, achieving the purpose of optimizing management and reducing power consumption. After the renovation is completed, not only the workload of on-site staff is reduced, but also the annual electricity bill can be saved by about 50000 yuan. (Chen Cuihong and Huang Bide)Shanghai Customer Visits Peak Cable
On June 20, a group of four from a Shanghai customer visited Peak Cable Company to discuss technical issues related to the B1 bunched combustion performance of communication cables.
More information
The company's vocational skill level self-identification training began.
After preparing the handout materials and question bank for the previous stage of vocational skill grade identification training, daye peak cement company conducted the vocational skill grade identification training for the machine repair team of the manufacturing department on August 10. On August 12 and 18, the pharmaceutical company also organized two phases of vocational skill level identification training for pharmaceutical preparation workers. According to the national skill level standard, the group company is divided into four grades: grade 5/junior worker, grade 4/intermediate worker, grade 3/senior worker and grade 2/technician. According to the analysis of employee registration, since there is only one type of job for pharmaceutical preparation workers, and cement production workers include cement central controller, cement quality inspector, cement clinker calciner, cement manufacturer, cement production inspection worker and other types of jobs, the number of applicants is less than that of cement production workers. Most of the employees who signed up were identified as participating in the four levels of vocational skills. According to preliminary statistics, there are now 155 employees who have signed up for their professional skill level, including 47 pharmaceutical preparation workers and 108 cement production workers. The human resources department of the group company is stepping up efforts to organize personnel to examine the qualifications of the employees whose registration grades are identified, and then enter the Zhejiang professional ability integration platform for formal registration after passing the examination. According to the national vocational skill standards and other content, each unit carries out targeted training for employees who participate in the independent identification of vocational skill levels. The training is conducted through on-site teaching, online teaching, and learning platform question bank exercises. After the training, the group company will organize the employees who participate in the grade identification to carry out examination and assessment, and those who pass the examination will complete the grade identification and issue the skill grade certificate. It is understood that in order to ensure the quality of vocational skill level identification, after the company was approved to independently identify the vocational skill level, the human resources department of the group organized all units to compile the question bank for various types of work in combination with the actual situation of the enterprise and with reference to the national vocational skill standards and training syllabus and other materials. after classification, unification and standardization, verification and proofreading, the preparation of the question bank has been basically completed. After being submitted to the superior unit for examination and approval, the company will import the question bank on the enterprise university platform to facilitate employees to prepare for the examination. The question bank for the independent identification of vocational skills level will also be extracted from the question banks of various industries, including professional ethics, basic knowledge, safety and environmental protection knowledge, laws and regulations knowledge, professional work practice and other national vocational skills standards. Basic requirements. The examination and assessment for independent determination of vocational skill level is tentatively scheduled for mid-September.
2021
08-23
Hu Guoyun, vice mayor of Pu'er, visited the peak
On July 16, a delegation led by Hu Guoyun, vice mayor of Pu'er City, Yunnan Province, and heads of Pu'er SASAC, Industrial Park Management Committee, Investment Promotion Bureau and other departments visited the headquarters of the group company. In the exchange with Jiang Xiaomeng, Yu Jianhong and other group leaders, Hu Guoyun expressed his gratitude to Jianfeng Group on behalf of the Pu'er Municipal Party Committee and Municipal Government. He said that the investment and entrepreneurship from Jianfeng to Pu'er not only promoted the development of Pu'er's regional industrial economy, but also made outstanding contributions to the local poverty alleviation. The two sides also exchanged and discussed issues such as strengthening in-depth cooperation between the two sides.
2021
07-21
Municipal SASAC Party Committee Visited Jianfeng Old Party Member
On June 28, Huang Zunhui, a second-level researcher of the State-owned Assets Supervision and Administration Commission of Jinhua City, visited Jianfeng Group and made a special trip to visit two retired party members, Chen Bingxiang and Yin Rongfu. Among the two Jianfeng veteran party members, Chen Bingxiang has been engaged in party affairs for nearly 30 years, and Yin Rongfu has won the honor of outstanding party members in Zhejiang Province and is a representative of Jianfeng party workers and party members. On behalf of the party committee of the Municipal State-owned assets Supervision and Administration Commission, Huang Zunhui expressed condolences to the two veteran party members, thanked the older generation of party members for their contributions, and exchanged views with Jiang Xiaomeng, secretary of the party committee and chairman of the group, and Qin Xuping, member of the party committee and chairman of the trade union, and fully affirmed the development of peak in recent years and the improvement of the level of party building work.
2021
07-12
"I'll teach you a lesson." Concluded successfully.
On the afternoon of June 24, as one of the highlights of the company's 2021 safety production month series of activities, the second phase of the "I'll give you a lesson" safety training was held at the group headquarters. the management personnel, production backbones and personnel from all departments and offices of the group gathered at the scene. foreign enterprises took safety "big lessons" through video, which was more effective than the teaching. At this point, the "I'll give you a lesson" safety training has come to a successful conclusion.
2021
07-12
Glory in the Party's 50-year-old Party Member Xi Ling Commemorative Medal
On June 23, the party committee of the group company sent a special person to visit and awarded the commemorative medals of "50 years of Glory in the Party" to six veteran party members. 2021 is the 100 anniversary of the founding of the Communist Party of China. For the first time, the Party Central Committee issued the "50 Years of Glory in the Party" commemorative medal to surviving party members who have reached the 50th anniversary of the party and have always performed well. The Organization Department of the Central Committee also specially issued the "Administrative Measures for the Issuance of Commemorative Medals of" Glory in the Party for 50 Years "", which stipulates the issuance procedures, issuance methods, production, and management of commemorative medals. In the future, the "50 Years of Glory in the Party" commemorative medal will be issued as a regular task and will be issued once every year around July 1.
2021
07-12
What is the exact time of the first Congress of the Communist Party of China? Which "big" representatives boarded the red boat in South Lake? What is the connection between the 1972 Sino-US Joint Communique and Hangzhou? On the morning of June 24th, the Party Committee of the Group Company invited members of the Party History Learning and Education Group of Zhejiang Provincial Party Committee and the vice president of Zhejiang Branch of China News Service to give a special party class of "returning to the scene of party history and reappearing the moment of party history" for the party members and cadres of the Company.
2021
07-01