Enterprise Shortwave
Release time:
2023-07-11
Huang Ping Jianfeng Cites Clinker Mineralizer to Achieve Preliminary Results
After more than two months of production verification, Huang Ping Jianfeng Cement Company Cites Clinker Mineralizer to Achieve Preliminary Results. Since
Huang Ping Jianfeng was put into production, it has been using manual analysis to restrict relevant oxides to control the fluctuation of clinker performance, and the effect is not satisfactory. For this reason, the company visited peer enterprises in many ways to "learn from" and conducted a scheme demonstration of adding mineralizer to stabilize clinker performance in early April, clarifying the responsible department and the time node for relevant work to advance. The quality inspection department starts the detection method and addition amount and method of mineralization agent, the manufacturing department analyzes the mechanism of mineralization agent generation and formulates production control parameters to facilitate the effective control of relevant production personnel, procurement to ensure the supply of raw materials and possible emergency raw material adjustment. After the production verification in May and June, the addition of mineralizer initially achieved the expected goals of improving clinker burnability, reducing clinker coal consumption and improving clinker strength, and determined the effective addition amount of mineralizer. Due to the combined effect of the mineralizer, the use of the most expensive iron raw material in the raw material ingredient correction is also reduced, reducing production costs. (Huang Xuguang)
Crane Operation Changed from Wired to Wireless
Recently, Guizhou Huang Ping Jianfeng changed the whole factory crane from wired to wireless.
Due to the limitation of operation field of vision and the influence of convenience, one person is required to operate the crane when working with wired crane, and the other person is required to observe the situation and command near the lifting items, which is prone to lifting accidents. After the modification is completed, the crane is equipped with a wireless remote control, and only one person is required to complete the operation and command work. In terms of safety, the crane equipped with a wireless remote controller is not affected by the operating position, and can be moved at will and away from the hoisting object to observe the situation, which greatly reduces the incidence of accidents. (Pan Chaochun)
Daye Peak Raw Material Span Band Analyzer Added Neutron Radioactive Source
On June 12, Daye Peak Cement Company used the working gap of the raw material roller press to add neutron radioactive source to the raw material span band analyzer.
Daye Peak Raw Material Cross-band Analyzer has been in normal operation for more than 3 years. Neutron radioactive source is the core part of cross-band analyzer detection, and its normal decay period is 2.5 years. In order to ensure the reliability of data detection of this equipment and the stability of raw material ingredients, Daye Peak will start to handle the declaration of radioactive source and other related procedures at the end of 2022. On June 10, after the neutron radioactive source arrived, daye peak contacted the manufacturer to arrange the installation of neutron source and static calibration of standard sample according to the production schedule, so as to ensure the effective operation of cross-band analyzer and the stability of raw material ingredient quality. (Chen Cui, Hong, Wen Bo)
Daye Peak Completed Reconstruction of Cement Bottom Crushing Valve
On June 14, Daye Peak Cement Company successfully completed installation and reconstruction of cement bottom crushing valve.
Cement will agglomerate during storage, causing blockage of the blanking port, which not only affects the efficiency of cement distribution, but also poses certain safety risks during blockage removal. When the driver of the bulk truck loads the truck, if the screen filter block is not used as required, once the cement block enters the bulk tanker, it will block the ash pipeline, increasing the workload and safety risks to the driver. For this reason, Daye Peak carried out the transformation of the bottom crushing valve of the cement depot, which completely eliminated the problems of blocking the depot and blocking the ash pipeline from the source, and also eliminated the safety risk of blocking from the root. (Huang Bide, Chen Cuihong)
Daye Peak Loading Road Dust Collection One-to-Two Renovation
In order to optimize site management, reduce the workload of site employees and reduce the production energy consumption target, on June 23, Daye Peak Cement Company completed the dust collection one-to-two renovation of the loading road.
Daye Peak Packaging Machine 1
# Parallel Belt Chute Dust Point Dust was originally collected by a filter cartridge dust collector. Due to the non-continuous distribution of bagged cement, in order to save power consumption, there are frequent startup and shutdown, and the maintenance time of filter cartridge dust collection is long, and the maintenance of filter cartridge dust collection is not as convenient as that of cloth bag dust collection. After the transformation is completed, the dust collection of the loading lane is controlled by the bag dust collection, and the air supply can fully meet the dust collection requirements of the loading lane loading and parallel belt chute, achieving the purpose of optimizing management and reducing power consumption. After the renovation is completed, not only the workload of on-site staff is reduced, but also the annual electricity bill can be saved by about 50000 yuan. (Chen Cuihong and Huang Bide)Shanghai Customer Visits Peak Cable
On June 20, a group of four from a Shanghai customer visited Peak Cable Company to discuss technical issues related to the B1 bunched combustion performance of communication cables.
More information
July 1 is the anniversary of the founding of the Communist Party of China. The party committee of the group organized the party members of the group headquarters and the heads of the grassroots party organizations to go to Jinggangshan, the red holy land, to retake the revolutionary road taken by the ancestors and review the history of revolutionary struggle.
2023
07-11
The Party Committee of the Group organized a thematic education seminar to study
On June 27, the Party Committee of the Group Company organized an education seminar on the theme of studying and implementing Xi Jinping's thoughts on socialism with Chinese characteristics in the new era. Jiang Xinwang, a professor and master tutor of Zhejiang Normal University, explained the deployment requirements of economic work and Xi Jinping's economic thoughts in the report of the 20th National Congress of the Communist Party of China with the theme of "accelerating the construction of a new development pattern and promoting high-quality development.
2023
07-11
Jianfeng Pharmaceutical rehired Academician Wang Guangji as Chief Scientist
On April 30, Jiang Xiaomeng, chairman of the group company and chairman of Jianfeng Pharmaceutical Company, on behalf of Jianfeng Pharmaceutical Company, issued a letter of appointment to Professor Wang Guangji, academician of the Chinese Academy of Engineering, and renewed him as the chief scientist of the pharmaceutical company.
2023
05-11
Jinhua Development Conference and Wucheng Development Conference
On April 30 and May 1, the third Jinhua Development Conference and the second Wucheng Development Conference opened successively. Jiang Xiaomeng, secretary of the party committee and chairman of the group company, won two major awards at the "Jinhua Development Outstanding Achievement Award" and "Wucheng Development Merit Award" at the two conferences, and participated in the Jinhua Life and Health Industry Summit roundtable and other activities.
2023
05-11
Daye Peak Cement Company, National "Green Factory"!
The Ministry of Industry and Information Technology recently announced the 2022 national green manufacturing list, Daye Peak Cement Company successfully ranked among the national "green factories. Green manufacturing is also known as environmentally conscious manufacturing, that is, in the manufacturing process, a modern manufacturing model that comprehensively considers environmental impact and resource benefits. Its purpose is to use technical means to optimize manufacturing procedures, minimize the impact on the environment (negative effect), and resource utilization The highest rate, and the coordination and optimization of economic and social benefits of enterprises, so as to achieve the purpose of resource conservation and sustainable development. In recent years, with the rapid development of social economy, the state attaches great importance to the construction of ecological civilization and ecological environment protection, and further promoting the construction of green manufacturing system has become an important means to promote high-quality development and maintain green water and green mountains forever. As an important part of the green manufacturing system, the Ministry of Industry and Information Technology has organized and carried out the creation of national-level green factories since 2017, and has conducted nationwide selection. It is an authoritative recognition for companies that meet the "green development" and aims to improve my country's green Manufacturing system, comprehensive implementation of green manufacturing, and help the industrial sector achieve the goal of carbon peak and carbon neutrality, it is an important way to promote the structural optimization of various industries, to get out of trouble and upgrade, and to improve quality and efficiency. Green factory refers to the realization of land intensive, raw materials harmless, clean production, waste resources, energy low-carbon factories. As the production unit of the manufacturing industry, the factory is the main body of the implementation of green manufacturing, which belongs to the core support unit of the green manufacturing system, focusing on the greening of the production process. Over the years, Daye Jianfeng has been adhering to the concept of green and low-carbon development, making every effort to build a garden-style factory. Through formulating plans and subdividing targets, it has clearly defined the total energy consumption and pollutant emission targets, and through carrying out school-enterprise cooperation to promote industry-university-research, it has actively implemented the strategy of "carbon peak and carbon neutrality", invested a huge amount of funds every year for technological transformation, and successively implemented technological transformation projects such as electric bags and low-nitrogen combustion upgrading, take the lead in the application of emission reduction technologies such as wet desulfurization and precise denitrification in the cement industry in Hubei Province, and continue to promote energy conservation, consumption reduction, and emission reduction. After the technical transformation, the company can save 3000 tons of standard coal every year, reduce the intensity of carbon dioxide emissions by 3.6, improve the level of energy-saving and green environmental protection management, and achieve the goal of creating a green factory. Being rated as a national-level green factory is not only a high affirmation and encouragement of Daye Peak's adherence to green, low-carbon and innovative development, but also an opportunity for Daye Peak to further promote green development. The person in charge of Daye Peak said that in accordance with national requirements, local industrial and information authorities should strengthen the connection between the units listed in the green manufacturing list and relevant industrial policies, give full play to the demonstration role of point to area, lead the green transformation of the manufacturing industry in the region, strengthen tracking guidance and dynamic management, and review the key indicators specified in the dynamic management table, Daye Peak will be in the future work, we will continue to further promote the management of environmental protection, energy conservation and emission reduction, give full play to the leading role of green factories in benchmarking, make low-carbon energy conservation, green environmental protection and reduce energy consumption the main keynote of enterprise development, and make continuous efforts to promote the high-quality development of enterprises and local economy. (Junin)
2023
04-03
"Cement Economy 50 People Forum" Jiang Xiaomeng Talk about the Future Development of Cement Industry
On March 14, the "Cement Economy 50 Forum" hosted by China Cement Network was held in Hangzhou, inviting 50 influential economic figures in the cement industry to discuss the future development of China's cement industry. Jiang Xiaomeng, chairman of the group company, was invited to attend the forum to discuss the development of the cement industry with his peers. The theme of this forum is "strengthening confidence, seeking breakthrough, and promoting development". It aims to point out the disadvantages of "mud", actively provide suggestions for the competent departments, enterprise transformation and upgrading, strategic and tactical decision-making in the difficult period of the cement industry, and provide new think tank opinions and methods to help form a new cement economic ecology. In the context of the sharp decline in demand, the cement industry is trapped inside and outside, how to revive the glory? How do cement companies survive and develop next? Around these two topics, the guests at the meeting had a heated discussion. Jiang Xiaomeng pointed out in his speech at the forum that the development of any enterprise is inseparable from the healthy development of the industry. Only when the industry is good can the enterprise be good, and the interests of the industry are greater than the interests of the enterprise. In addition, the competition of similar enterprises should seek a breakthrough from the differentiation, and it is unreasonable to blindly pursue low prices. Industry synergy, industry synergy, supply, demand, price, to find a common price line, on the basis of competition and cooperation, from the management services, cost control and other aspects to highlight the advantages of enterprises. The participants reached consensus on many issues after heated discussions. It is generally believed that 2022 is the most complex year in the cement industry in the past decade, affected by the multi-point spread of the epidemic, real estate downturn and other factors, the cement market demand is sluggish, the contradiction between supply and demand is prominent, prices are falling rapidly, business difficulties, the pace of steady growth of the industry is blocked. Entering 2023, under the macroeconomic situation of stabilizing the economy and promoting development, as well as various regions stepping up efforts to promote the construction of major projects, cement demand is expected to increase in 2023 compared with 2022, and the situation in the second half of the year will be better than that in the first half. However, under the expectation of restorative growth in demand, the cement industry is still facing uncertainties such as continued bottoming of real estate, high energy costs, and overcapacity. In this regard, we should resolutely maintain the normal order of the industry, make concerted efforts to help the industry get out of the predicament, and firmly implement staggered peak production. Through mergers and acquisitions, carbon quotas, energy efficiency indicators, environmental protection indicators, coal indicators, market competition and other means to further resolve the contradiction of overcapacity, optimize the industrial layout, and adhere to innovation-driven in digital, intelligent and green development, so as to promote and finally realize the high-quality development of the cement industry. (this newspaper reporter)
2023
03-21