To be cool, but also beautiful
Release time:
2023-04-03
Last summer, Huang Ping Jianfeng Cement Company made a minor renovation of the top of the clinker warehouse. Four large cuts were made on all sides of the top of the warehouse, and the temperature in the warehouse was lowered by the opposite flow of natural wind. In March this year, Huang Ping Jianfeng installed beautiful shutters for these four mouches, which are cool and more beautiful.
Since the official production of Huang Ping Jianfeng Cement, the top of the clinker warehouse on our production line is a fully enclosed color steel shed. After the clinker is burned out, it has a higher temperature and is stored in a large amount in a hot material warehouse with a capacity of 50000 tons. The hot air floats up to the entrance and door hole above, just like a big steamer. There are also important equipment such as head wheel, motor, liquid couple, reducer, dust collector fan motor, bearing and other equipment in the head of clinker chain bucket machine. The high temperature weather in summer and the hot air of the clinker inside, the ambient temperature inside can reach above 60 ℃, and the temperature of some equipment is as high as above 100 ℃, so people can't stay inside for a few minutes. In 2021, the over-clinker chain hopper will stop due to the high temperature of the equipment. The clinker chain hopper itself is an important equipment in the clinker forging system. Once the equipment is stopped, the operation of the kiln will be affected, resulting in the kiln to be stopped. The problem of high ambient temperature at the top of
warehouse has been perplexing Huang Ping's peak. Various methods have been tried before. First, a small hole was opened directly above the ceiling for ventilation, and a compressed air axial flow fan was used to blow at the high temperature point of the equipment. However, the effect is not ideal or a long-term solution. Last summer, Huang Ping's peak made four large cuts on the four sides of the top of the warehouse. He used the natural wind to flow in the opposite direction to speed up the air circulation inside, thus lowering the temperature. Not to mention that this did have obvious effects. The ambient temperature was controlled at about 40 to 50 degrees Celsius, and the equipment was operated more smoothly.
After the temperature dropped, the four big holes did not look so pleasing to the eye. In early March, while the construction team installing the fan sound insulation was working in the factory, Huang Ping Jianfeng installed the four holes together with beautiful blinds, which looked much more beautiful after installation. (Liu Zhonghua)
More information
Tianjin Flemish Company Donates Anti-epidemic Materials
On the morning of July 13, Tianjin Jianfeng Flanders Pharmaceutical Technology Development Co., Ltd. donated materials to the Tianjin Development Zone Charity Association to help the development zone community fight the epidemic.
2020
08-05
In late July, leaders of the group company Jiang Xiaomeng, Yu Jianhong, Chen Tianci and Qin Xuping visited subordinate enterprises separately and sent heatstroke prevention and cooling supplies to employees working under high temperature, urging everyone to pay attention to heatstroke prevention and cooling and safe production work to ensure good physical condition.
2020
08-05
On July 17 and 18, the Group's work analysis meeting for the first half of 2020 was held at the Peak Building of the Group's headquarters to summarize and review the work in the first half of the year and make arrangements for the work in the second half of the year.
2020
08-05
The company requires to do a good job in summer safety production
The high temperature season is approaching, and the group company issued a notice a few days ago to make arrangements for safe production in summer.
2020
08-05
The company requires to do a good job in summer safety production
The high temperature season is approaching, and the group company issued a notice a few days ago to make arrangements for safe production in summer. The notice requires all subordinate units of the company to attach great importance to the work of production safety in summer, and all production and business units should hold a special meeting on production safety in summer. According to the characteristics of production in summer, they should focus on safety risk analysis for mines, outdoor operations and high-temperature posts, and implement control measures to avoid the occurrence of safety accidents such as scalding, heatstroke and electric shock. In order to further strengthen the safety production management in the high temperature season, the notice requires the main person in charge of each production and business unit to lead a team to conduct a comprehensive inspection of the production and business premises according to the characteristics of summer production; strengthen the daily safety production inspection of key posts and special posts; timely rectify the found unsafe behaviors and hidden dangers; Strengthen the management of the storage and use of flammable, explosive, dangerous chemicals and drugs; cooling measures shall be taken for the space exceeding the storage temperature limit of articles. If it is found that the electrical equipment circuit and exhaust fan circuit are aged and damaged, replace them in time and keep the grounding wire in good condition. Do a good job in checking the fire pool, pipeline water pressure and fire extinguishing equipment to ensure that the fire fighting facilities are sensitive, intact and reliable. The high temperature in summer is also a period of frequent occurrence of heatstroke and other diseases. The notice requires all units to do a good job in heatstroke prevention and cooling, implement various relevant measures, and equip necessary cooling facilities or materials such as fans, air conditioners, ice cubes and other cooling facilities or materials according to the conditions of the production site; do a good job in the distribution of heatstroke prevention drugs, supplies and cool drinks in workshops, warehouses, construction sites and other production lines; strengthen canteen management to prevent food poisoning. (this newspaper reporter)
2020
07-22
The company requires to do a good job in summer safety production
The high temperature season is approaching, and the group company issued a notice a few days ago to make arrangements for safe production in summer. The notice requires all subordinate units of the company to attach great importance to the work of production safety in summer, and all production and business units should hold a special meeting on production safety in summer. According to the characteristics of production in summer, they should focus on safety risk analysis for mines, outdoor operations and high-temperature posts, and implement control measures to avoid the occurrence of safety accidents such as scalding, heatstroke and electric shock. In order to further strengthen the safety production management in the high temperature season, the notice requires the main person in charge of each production and business unit to lead a team to conduct a comprehensive inspection of the production and business premises according to the characteristics of summer production; strengthen the daily safety production inspection of key posts and special posts; timely rectify the found unsafe behaviors and hidden dangers; Strengthen the management of the storage and use of flammable, explosive, dangerous chemicals and drugs; cooling measures shall be taken for the space exceeding the storage temperature limit of articles. If it is found that the electrical equipment circuit and exhaust fan circuit are aged and damaged, replace them in time and keep the grounding wire in good condition. Do a good job in checking the fire pool, pipeline water pressure and fire extinguishing equipment to ensure that the fire fighting facilities are sensitive, intact and reliable. The high temperature in summer is also a period of frequent occurrence of heatstroke and other diseases. The notice requires all units to do a good job in heatstroke prevention and cooling, implement various relevant measures, and equip necessary cooling facilities or materials such as fans, air conditioners, ice cubes and other cooling facilities or materials according to the conditions of the production site; do a good job in the distribution of heatstroke prevention drugs, supplies and cool drinks in workshops, warehouses, construction sites and other production lines; strengthen canteen management to prevent food poisoning. (this newspaper reporter)
2020
07-31
Contact Us
No. 88 Wujiang East Road, Jinhua City, Zhejiang Province, China
Tel: +86-579-82326868
Fax : +86-579-82324666
©2023 Zhejiang Jianfeng Group Co., Ltd. Powered by: www.300.cn SEO Business License
SAF Coolest v1.2 设置面板 SHJSS-AHDB-FSSQE-ZSW
无数据提示
Sorry, the current column has no content !
You can view other columns or return to Home Page