News Center

Home page

Peak Report

News reports

To be cool, but also beautiful

Release time:

2023-04-03

Last summer, Huang Ping Jianfeng Cement Company made a minor renovation of the top of the clinker warehouse. Four large cuts were made on all sides of the top of the warehouse, and the temperature in the warehouse was lowered by the opposite flow of natural wind. In March this year, Huang Ping Jianfeng installed beautiful shutters for these four mouches, which are cool and more beautiful.

Since the official production of Huang Ping Jianfeng Cement, the top of the clinker warehouse on our production line is a fully enclosed color steel shed. After the clinker is burned out, it has a higher temperature and is stored in a large amount in a hot material warehouse with a capacity of 50000 tons. The hot air floats up to the entrance and door hole above, just like a big steamer. There are also important equipment such as head wheel, motor, liquid couple, reducer, dust collector fan motor, bearing and other equipment in the head of clinker chain bucket machine. The high temperature weather in summer and the hot air of the clinker inside, the ambient temperature inside can reach above 60 ℃, and the temperature of some equipment is as high as above 100 ℃, so people can't stay inside for a few minutes. In 2021, the over-clinker chain hopper will stop due to the high temperature of the equipment. The clinker chain hopper itself is an important equipment in the clinker forging system. Once the equipment is stopped, the operation of the kiln will be affected, resulting in the kiln to be stopped. The problem of high ambient temperature at the top of

warehouse has been perplexing Huang Ping's peak. Various methods have been tried before. First, a small hole was opened directly above the ceiling for ventilation, and a compressed air axial flow fan was used to blow at the high temperature point of the equipment. However, the effect is not ideal or a long-term solution. Last summer, Huang Ping's peak made four large cuts on the four sides of the top of the warehouse. He used the natural wind to flow in the opposite direction to speed up the air circulation inside, thus lowering the temperature. Not to mention that this did have obvious effects. The ambient temperature was controlled at about 40 to 50 degrees Celsius, and the equipment was operated more smoothly.

After the temperature dropped, the four big holes did not look so pleasing to the eye. In early March, while the construction team installing the fan sound insulation was working in the factory, Huang Ping Jianfeng installed the four holes together with beautiful blinds, which looked much more beautiful after installation. (Liu Zhonghua)

More information

Peak natural products among the top 20 scientific and technological innovation in TEDA

A few days ago, Tianjin Jianfeng Natural products Research and Development Co., Ltd. stood out among nearly 35000 enterprises in Tianjin Development Zone and won the honor of "Top 20 Scientific and technological Innovation Enterprises of 2015. The selection criteria for the top 20 scientific and technological innovation enterprises in Tianjin Economic and Technological Development Zone mainly include: they have won science and technology awards or patent awards in 2015, as well as other awards above the provincial level; they have obtained the qualification certification or approval of research and development institutions above the provincial level; in 2015, the number of invention and utility model patent applications and authorizations was large, totaling more than 15; in 2015, they were supported by national or Tianjin key science and technology plans; scientific research achievements have made significant progress and technology. According to the above standards, Jianfeng Natural Products Company has not only won the second prize of Tianjin Science and Technology Innovation Project Award for the achievements of "Tianjin Plant Waste Reutilization Technology Engineering Center Construction", but also completed the process research of grape seed extract and ginsenoside to pesticide residues, and formulated the international business standard of grape seed extract (grape seed oligomeric proanthocyanidins). In order to better carry out the pilot experiment, large-scale technical transformation was carried out on the second workshop, and the process optimization of extracting anthocyanins from blueberries has been carried out. At the same time, the main business income, operating profit, tax revenue and other economic indicators of peak natural products company in 2015 have increased significantly year-on-year. Relying on the advantages of excellent quality, good efficiency, great contribution, safety and environmental protection, and good social responsibility, Jianfeng Natural Products Company successfully passed the review and became one of the "Top 20 Scientific and Technological Innovation Enterprises in 2015" in Tianjin Development Zone. (

2020

07-31

Peak natural products among the top 20 scientific and technological innovation in TEDA

2020

07-30

Peak pharmaceutical "enterprise information construction project" through the acceptance

The "Enterprise Informatization Construction Project" of Jianfeng Pharmaceutical Company was included in the list of key projects of "Integration of Industrialization and Industrialization" (high-level and in-depth combination of informatization and industrialization) in Jinhua City in 2015, and successfully passed the on-site acceptance of the expert group on the morning of May 18. The main contents of the "enterprise information construction project" of the pharmaceutical company include: the tank farm control system, which solves the problem of closed metering and transportation of organic solvents between the tank farm and the production area, can automatically realize the terminal metering setting, and effectively ensure the safety and environmental protection requirements of the tank farm operation; The air conditioning automatic control system realizes the control of the temperature, humidity and room pressure difference in the air conditioning area through the PLC digital-to-analog conversion of the upper computer and lower computer and the terminal actuator regulator, ensure the cleanliness requirements of the production area environment; The online particle monitoring software system automatically adjusts to the standard flow through the upper computer, vacuum system, laser sensor and isodynamic sampling probe, etc. through the flow detector device and key orifice plate inside each sensor, monitors the temperature, humidity, particles, planktonian bacteria, room pressure difference, etc., implements dynamic management, and realizes visual monitoring of the production process environment. MRP production management system, it makes it easier for the warehouse, workshop, and management personnel to obtain information about the flow of materials in the production process, the implementation of production plans, and product inventory. During the on-site acceptance on the 18th, the acceptance team composed of the Information Department of the Municipal Economic and Information Commission, the Economic and Development Bureau of the Development Zone, the Municipal Information Promotion Association and professors of Zhejiang Normal University checked the contracts of each system software, purchase and transfer records, training records, and problem records in project implementation,

2020

07-31

Peak natural products among the top 20 scientific and technological innovation in TEDA

2020

07-31

< 1...58 59 60 61 > 跳转到页