Huang Ping peak marketing staff manufacturing department learning work experience
Release time:
2022-04-06
Editor's Note: In order to strengthen the marketing staff's mastery of relevant business skills such as cement production enterprise process, cement theoretical knowledge, enterprise quality control, cement quality inspection process operation, etc., at the beginning of the New Year, Huang Ping Jianfeng Cement Company arranged marketing staff to practice in production positions in batches and stages to understand the cement production process. At present, some salesmen have completed the internship of the manufacturing department and summarized their internship work. This paper excerpts a part for everyone to share and learn.
Through 15 days of internship in different positions in the cement production line, I have a further understanding of the cement production process. At the same time, but also clearly aware of their lack of knowledge of cement.
to the manufacturing department on-site work and study, the first thing is safety education and training, which requires our employees to firmly establish the idea of safety first in their daily work, correctly handle the relationship between safety and production, and ensure the safe production of enterprises. In these 15 days, the place I stayed most was the kiln system, followed by the raw material system. We have to continuously inspect the entire production line every day to eliminate potential safety hazards in time. Wear masks and earplugs in places with a lot of dust and noise to reduce the impact of dust and noise on health. Every time the patrol inspection finds that there is a problem with the equipment or cleans up the smoke room and coal pipes, it is necessary to contact the central control through the interphone in the first place, and the central control can only start the operation after shutting down the equipment.
What I have to do every day in the kiln system is to check the flap valves in each layer of the preheater to prevent material accumulation, and then assist colleagues to clean up the clinker particles leaked from the smoke room, the coal pipe at the kiln head and the kiln head. During the operation, although I was assisting on the side, my colleagues still asked me to obey their instructions, wear a complete set of fire-proof clothing, and do a good job of safety protection to prevent safety accidents.
When studying the raw material system, my colleague introduced me to a small skill, which is to judge whether the raw material is qualified or not by the temperature of the V powder selector. Because the high and low temperature represents the high and low of the integrated moisture of the grinding material, the two are inversely proportional to the relationship. It can also be found that the chemical composition and content of the material will directly affect the kiln calcination operation and yield.
clinker is a hydraulic cementitious substance containing calcium oxide, silica, alumina and iron oxide, which is ground into fine powder and fired into partial melting state according to appropriate proportion, and calcium silicate is taken as the main mineral component. The mineral composition of clinker mainly includes tricalcium silicate, dicalcium silicate, tricalcium aluminate and tetralcium aluminate. The mineral with the largest content is tricalcium silicate, followed by dicalcium silicate. Cement clinker in the kiln system formation process, according to the temperature and reaction can be roughly divided into drying, preheating, firing and cooling. The six-stage preheater used by Huangping Peak can make better use of the waste heat of the waste gas discharged from the kiln and the decomposition furnace to heat the raw material, and the gas-solid dispersion is uniform, the heat exchange is rapid and the high energy separation is high, which improves the heat exchange efficiency between the gas and solid to a greater extent, and realizes the superiority, high yield and low consumption of the whole calcination system. The raw material enters the preheater from the raw material warehouse for preheating and decomposition, and then enters the kiln for calcination. After calcination, the clinker enters the fourth-generation grate cooler. Grate cooler is mainly to reduce the clinker temperature, and the role of the heat contained in the clinker for multiple use, while the heat in the form of secondary air, tertiary air return to the kiln, preheater and waste heat power generation system. Finally, the qualified clinker is transported to the clinker warehouse through the clinker inclined zipper.
After a short follow-up study, I not only buried the "seed " for safe production, but also got a preliminary understanding of the role of common raw materials in the cement production process. Only by laying a good foundation and communicating in the same industry, can we not get stage fright because we do not understand the use of equipment and the role of various raw materials, and have more communication with customers in the front line of the market. If I want to do a good job in cement business, I also need to be more proficient in cement knowledge and marketing knowledge, and dare to innovate, constantly improve my business skills, and be a qualified salesman. (Chen Jianfei)
At the production site, the most is the production equipment, and the most important thing to pay attention to is the mechanical injury. Before the equipment is turned on, the central control room will definitely notify the on-site inspection personnel to carry out detailed inspection on the site to confirm that no one can turn on the mechanical parts and belt conveyor on the site. There are large pieces of material and other abnormal conditions on site, which need to be dredged manually. The first thing to do is to notify the central control room to stop the equipment to prevent problems before they occur. When working, we should wear masks, protective clothing and earplugs for noisy equipment. When cleaning up the smoke room, there must be two or more people present, wearing fire-proof clothing, fire-proof caps and fire-proof covers, and there will be other on-site personnel to assist to ensure the safety of the operators.
During the two months of studying in the manufacturing department, I have a more comprehensive understanding of limestone mining, raw material crushing and pre-homogenization, raw material grinding, raw material homogenization, clinker calcination and cooling, cement powder, cement storage and homogenization, cement shipping and other processes. The site of the manufacturing department is roughly divided into five systems: raw meal, kiln, coal mill, cement mill and waste heat power generation. In addition to waste heat power generation, I have studied the inspection post of each system for a week, and have a better understanding of the production process and equipment of each system, as well as the matters needing attention in the usual inspection.
The two-month period is very short. Although it is a bit hard, in general, the harvest is far greater than the effort, and it also makes me realize many simple and simple truths. Every department and every post is indispensable, and no one can be careless, otherwise it will affect the work of the entire production line and the quality of the products. It also made me understand that only when production and sales cooperate with each other can enterprises produce and operate better. The study in the manufacturing department not only gave me a better understanding of the cement production process and cement professional knowledge, but also made me understand that in my new position, I must ask and learn more. Only by working with curiosity can I learn more knowledge. After that, I will continue to strengthen my study of cement production process and professional knowledge. Although I am a marketing position, it is difficult for me to establish a foothold in this industry without a solid foundation and a studious attitude.
(Yang Wentao)
The most important thing in the production workshop is to protect my own safety, so on the first day I entered the workshop to study, I first conducted level 3 safety education, training and examination. After entering the site, I started from the most basic job position, that is, the feeding position, which is mainly responsible for the normal feeding of raw materials and the inspection and dredging of clay belts and iron slag feeding ports. Most of my time is spent in clay feeding ports, iron powder weighing, clay belt heads and other places where materials are easy to accumulate. For me, who has never worked night shift, working all night has become the first big test. Every time after 2 in the morning, my eyes begin to strike. Neither drinking coffee nor washing my face can wake up my body. I remember one time when I was preparing to rest after cleaning the clay blanking port, I received a notice that the sandstone crusher was full of rubble. so at 2: 50 in the early morning, we started the cleaning work. because the construction space was relatively narrow, the dust all over the sky accompanied me for 2 hours of cleaning work, which was deeply imprinted in my memory. I was tired, hungry and sleepy, you can fall asleep almost anywhere.
In the first week of studying in the manufacturing department, I mainly experienced the work of the feeding post and learned the raw materials of the stacking shed. In the second week, I moved to the inspection post of the raw material system, mainly inspecting the normal operation of all equipment in the raw material system. When I followed the post worker to inspect together, he introduced the equipment and their operation principle to me in detail. In the third week, I went to the kiln system, which is the most critical part of cement production, and cleaned the crust in the smoke chamber and the accumulated material in the coal injection pipe at fixed points every day. In order to prevent injuries, protective measures need to be taken during work. After wearing fire-proof clothing and fire-proof cap, you can carry out high-pressure water gun skinning with the post worker. The daily inspection work is running in the preheater, which is as high as ,120 meters. Each floor swings the flap valve to prevent the flap valve from being stuck. At that time, I was also punished for not reporting to my superiors because the flap valve on the fourth floor was stuck. The fourth week is the last step into the cement production process - cement mill system study.
Through nearly two months of study in the manufacturing department, I have a better understanding of cement-related knowledge, but this is far from enough. If I want to be a qualified marketing personnel, I still need to enrich myself through continuous learning.
(Liu Chen Qian)
More information
Pharmaceutical Company Established New Drug R & D Promotion Committee
Recently, the new drug research and development promotion committee of Jianfeng pharmaceutical company was formally established, which will be responsible for promoting the new drug research and development progress of pharmaceutical companies and subordinate enterprises, and coordinating the new drug research and development work of various departments and subordinate enterprises. The New Drug Promotion Committee is headed by Huang Jinlong, deputy general manager of the group and general manager of the pharmaceutical company, and Jiang Hong, deputy general manager of the pharmaceutical company, is headed by Pang Xiong, Shi Cunyuan, Xu Lizhen, Yu Jingjing, Zheng Kunwu, Feng Lixiang, Kang Litao, Li Qian, Wu Chonggui, Zhai Tsunami, Huang Fang and Tong Xiaojun. The committee has an office, and Shi Cunyuan is also the director of the office, responsible for the supervision, communication, and coordination of the company's new drug research and development projects. The main responsibilities of the new drug promotion committee include: organizing the establishment and improvement of the R & D project management system and relevant regulations of the pharmaceutical company; organizing the formulation of the development plan of the new drug R & D project of the pharmaceutical company and supervising the implementation; making decisions on project initiation and participating in project evaluation; supervising the management of new drug R & D of the pharmaceutical company and providing guidance; Responsible for the process management of new drug R & D projects and the promotion and coordination of new drug R & D; carry out the assessment of new drug research and development projects; issue the responsibility system assessment and task statement of new drug research and development projects; be responsible for solving major technical problems in the process of new drug research and development; be responsible for the research and improvement of the management mode of research and development projects of pharmaceutical companies; be responsible for the future trend analysis of new drug research and development projects; review the major scientific research achievements of pharmaceutical companies and put forward reward suggestions. Huang Jinlong said that the research and development of new drugs is an important foundation for the healthy development of the pharmaceutical industry and is a systematic project. Jianfeng Pharmaceutical has always attached great importance to the research and development of new drugs, but there is still a certain gap between the progress of research and development and the development process of the enterprise, and the lack of coordination in the research and development process also affects the progress and quality of new drug research and development to a certain extent. The purpose of the establishment of the New Drug Research and Development Promotion Committee is to solve the progress of new drug research and development, to find and solve problems in time, to implement more targeted, and to effectively integrate enterprise resources, improve the speed and quality of new drug research and development, and make good product reserves for the healthy development of pharmaceutical companies. (Reporter Ni Yingzhen)
2020
09-11
Jianfeng Pharmaceutical ranks among the top 100 Chinese pharmaceutical industries in 2019
On August 25, the "2019 Top 100 Series List of China's Pharmaceutical Industry" was released in Kunming. Zhejiang Jianfeng Pharmaceutical Company was shortlisted as one of the top 100 enterprises in China's pharmaceutical industry. The product Berunning (Olopatadine Hydrochloride Eye Drops) was selected as the "Most Growing Product Brand" of China's pharmaceutical industry ". The "Top 100 Pharmaceutical Industry Series List" was evaluated and released by Guangzhou Punctuation Pharmaceutical Information Co., Ltd., a subsidiary of the Southern Institute of Pharmaceutical Economics of the State Drug Administration, and is known as the "Oscar in Chinese Pharmaceutical Industry. Southern Institute is the earliest institution in China that specializes in pharmaceutical industry policy and market economy research, pharmaceutical market research, pharmaceutical economic data analysis and research, and pharmaceutical professional media publishing. It is in the field of market information value-added services and media communication and marketing services in China's pharmaceutical and health industry., The field of professional quality improvement has extremely extensive influence. The "Top 100 Pharmaceutical Industry" is comprehensively evaluated by the company's annual pharmaceutical industry sales revenue, total profit and R & D investment results. On the same day, the "most growing product brand" of Chinese medicine selected by the Southern Institute's media "Pharmaceutical Economic News" was released simultaneously. Spike Pharmaceuticals product Beirunning (Olopatadine Hydrochloride Eye Drops) was selected. (Xu Yuting)
2020
09-01
Company Disclosure 2020 Semi-Annual Report
On August 28, the Group held the 16th meeting of the 10th Board of Directors of the Company by means of communication, and considered and adopted the "2020 Semi-Annual Report of Jianfeng Group" and the "Proposal on Changes in the Company's Accounting Policy". On August 29, the Company's 2020 semi-annual report was publicly disclosed on the Shanghai Stock Exchange and the Shanghai Securities News and China Securities News. In the first half of the year, the Group focused on the general policy of "grasping projects, making up for shortcomings, improving quality and efficiency, and constantly improving the core competitive advantage", and on the basis of doing a good job in epidemic prevention and control, the Group seized the resumption of work and production, accelerated project construction, and enhanced the core competitiveness of enterprises. In the first half of 2020, the company achieved total operating income of 1.44 billion yuan, net profit attributable to shareholders of 0.368 billion yuan, net profit per share of 1.07 yuan. As of the end of June 2020, the Company's total assets were $5.892 billion, net assets were $4.068 billion, and net assets per share were $11.82. From February to April, affected by the epidemic, the national project construction progress slowed down, cement market demand decreased; after May, the epidemic was effectively controlled, infrastructure investment continued to recover, the real estate industry continued to pick up, cement sales steadily rebounded. During the outbreak, Daye Peak completed the technical transformation projects such as the cold machine, cement mill, into the desulfurization tower anti-corrosion transformation, to ensure the efficient operation of the production equipment after the resumption of work. Yunnan peak rotary kiln production, cement production and other major technical and economic indicators of steady rise; comply with market trends, timely adjustment of marketing policies. Guizhou Jianfeng has promoted the project infrastructure construction, equipment installation and commissioning, raw material bidding and other work in an orderly manner, and through preliminary publicity to enhance the popularity of the Jianfeng brand in the local area, and make a series of preparations for the transformation from project construction to production and operation. In the first half of 2020, the reform of China's medical and health system continued to deepen, and new policies were introduced intensively. Peak Pharmaceuticals and its subsidiaries in the epidemic prevention work at the same time in the first time to achieve the resumption of production, and actively organize donations to support the fight against the epidemic, was named the annual "war epidemic star" the most socially responsible pharmaceutical enterprises. In the first half of the year, Jianfeng Pharmaceutical continued to increase the introduction and development of varieties, and JFAN-1001 applied for clinical application of new anti-tumor drugs. At present, it has obtained the notice of approval for clinical trials. Optimize the production process of API workshop and further shorten the production cycle of raw materials. Continue to improve product sales policies and strengthen market channel control. Shanghai North Carolina further straightened out the internal management structure, production and marketing convergence more smoothly, continue to promote the construction of Anhui North Carolina and Anhui Zhongwang Phase II technical transformation project, promote the peak pharmaceutical raw materials, preparations integration of industrial upgrading strategy. Other business segments of the company actively responded to the challenge of the new crown epidemic and carried out production and operation activities in a standardized and orderly manner. Tianjin natural products company vigorously explore the international and domestic markets, sales revenue to achieve steady growth. Peak Health focuses on the basic idea of "sales orientation, burden reduction and efficiency improvement, fine-grained savings, cost reduction and efficiency enhancement" to effectively improve the operational efficiency of enterprises. Jianfeng International Trade has actively developed new storage business varieties and achieved practical results, and has become the first enterprise in Jinhua to formally obtain the qualification of "network freight. Peak cable seizes the special needs of communication cables such as subways, vigorously promotes large logarithmic cables for subways, and strives to achieve the long tail effect. On the same day, the company also held the 10th meeting of the Ninth Board of Supervisors and reviewed and approved relevant reports. (residual fruit)
2020
09-01
The company organizes new employee induction training
From August 12 to 14, in order to strengthen the training of talents in the group and improve the comprehensive quality of new employees, Jiang Xiaomeng, secretary of the party committee and chairman of the group company, Yu Jianhong, general manager, and other leaders and heads of relevant enterprises and departments conducted a three-day induction training for new employees. New employees from foreign enterprises such as Guizhou Huangping Peak, Daye Peak and Shanghai North Carolina participated simultaneously through online methods. In the course of corporate culture, General Manager Yu Jianhong started from the history of the development and struggle of the peak, divided into five stages: hard work, determined reform, diversified development, strategic adjustment, and strategic development, and introduced in detail the development process of the group company and the current industrial layout., The results achieved; from the aspects of enterprise spirit, vision, development philosophy, values, business philosophy, etc, this paper introduces the peak corporate culture rooted in 62 years of history and inherited in the blood; from the perspective of an enterprise manager and old employees, he speaks a lot of truth to the new employees and puts forward a lot of hopes and suggestions. Chairman Jiang Xiaomeng took "How New Employees Achieve Win-Win with Enterprises" as the topic, and proposed that the key to the success of an enterprise lies in how to select, retain, educate and employ people. Peak and employees complement each other. Peak can achieve today's achievements and the struggle of generations of peak people are inseparable. He also taught new employees the basic concepts that need to be understood, the basic qualities that need to be possessed and the sense of hardship in entering the new environment through 16 key words, and combined with his own experience and quoting from others, he analyzed the core elements of success, the signs of a successful career, the personal qualities that need to be possessed for success, and the importance of establishing a personal knowledge management system, it expresses the ardent hope of new employees to adjust their mentality, keep learning, clear goals, clear dreams, cultivate win-win thinking, and grow up together with the peak. The heads of the human resources department of the group company, the safety management office of the group company, and the comprehensive department of the pharmaceutical company also taught the new employees the corporate rules and regulations and the "Employee Handbook", safety knowledge and professional ethics. The new employees also visited the group exhibition hall and had a deeper understanding of the development history and enterprise achievements of the peak. After the training, the human resources department also organized an examination to test the training effect. (Reporter Chen Shengmu)
2020
08-21
According to this newspaper, through the interconnection monitoring of the transportation department in Zhejiang province, the network freight platform of peak international trading company passed the online service capability audit, interface access audit, eight capability identification and other audit procedures, and successfully obtained the road transportation business license with the qualification of "network freight" on July 2. It is understood that Jianfeng International Trade is currently the first enterprise in Jinhua and Quzhou to obtain this qualification.
2020
08-05
News from our newspaper On July 21, Xi Jinping, General Secretary of the Central Committee of the Communist Party of China, President of the State, and Chairman of the Central Military Commission hosted a symposium for entrepreneurs in Beijing and delivered an important speech. Over the past few days, the General Secretary's speech has aroused strong repercussions in all walks of life. On July 23, Jiang Xiaomeng, chairman of the group company, said in an interview with Jinhua TV that the general secretary's speech was calm and inspiring, and pointed out the direction of future work for entrepreneurs.
2020
08-05
Contact Us
No. 88 Wujiang East Road, Jinhua City, Zhejiang Province, China
Tel: +86-579-82326868
Fax : +86-579-82324666
©2023 Zhejiang Jianfeng Group Co., Ltd. Powered by: www.300.cn SEO Business License
SAF Coolest v1.2 设置面板 SHJSS-AHDB-FSSQE-ZSW
无数据提示
Sorry, the current column has no content !
You can view other columns or return to Home Page