Huang Ping peak marketing staff manufacturing department learning work experience
Release time:
2022-04-06
Editor's Note: In order to strengthen the marketing staff's mastery of relevant business skills such as cement production enterprise process, cement theoretical knowledge, enterprise quality control, cement quality inspection process operation, etc., at the beginning of the New Year, Huang Ping Jianfeng Cement Company arranged marketing staff to practice in production positions in batches and stages to understand the cement production process. At present, some salesmen have completed the internship of the manufacturing department and summarized their internship work. This paper excerpts a part for everyone to share and learn.
Through 15 days of internship in different positions in the cement production line, I have a further understanding of the cement production process. At the same time, but also clearly aware of their lack of knowledge of cement.
to the manufacturing department on-site work and study, the first thing is safety education and training, which requires our employees to firmly establish the idea of safety first in their daily work, correctly handle the relationship between safety and production, and ensure the safe production of enterprises. In these 15 days, the place I stayed most was the kiln system, followed by the raw material system. We have to continuously inspect the entire production line every day to eliminate potential safety hazards in time. Wear masks and earplugs in places with a lot of dust and noise to reduce the impact of dust and noise on health. Every time the patrol inspection finds that there is a problem with the equipment or cleans up the smoke room and coal pipes, it is necessary to contact the central control through the interphone in the first place, and the central control can only start the operation after shutting down the equipment.
What I have to do every day in the kiln system is to check the flap valves in each layer of the preheater to prevent material accumulation, and then assist colleagues to clean up the clinker particles leaked from the smoke room, the coal pipe at the kiln head and the kiln head. During the operation, although I was assisting on the side, my colleagues still asked me to obey their instructions, wear a complete set of fire-proof clothing, and do a good job of safety protection to prevent safety accidents.
When studying the raw material system, my colleague introduced me to a small skill, which is to judge whether the raw material is qualified or not by the temperature of the V powder selector. Because the high and low temperature represents the high and low of the integrated moisture of the grinding material, the two are inversely proportional to the relationship. It can also be found that the chemical composition and content of the material will directly affect the kiln calcination operation and yield.
clinker is a hydraulic cementitious substance containing calcium oxide, silica, alumina and iron oxide, which is ground into fine powder and fired into partial melting state according to appropriate proportion, and calcium silicate is taken as the main mineral component. The mineral composition of clinker mainly includes tricalcium silicate, dicalcium silicate, tricalcium aluminate and tetralcium aluminate. The mineral with the largest content is tricalcium silicate, followed by dicalcium silicate. Cement clinker in the kiln system formation process, according to the temperature and reaction can be roughly divided into drying, preheating, firing and cooling. The six-stage preheater used by Huangping Peak can make better use of the waste heat of the waste gas discharged from the kiln and the decomposition furnace to heat the raw material, and the gas-solid dispersion is uniform, the heat exchange is rapid and the high energy separation is high, which improves the heat exchange efficiency between the gas and solid to a greater extent, and realizes the superiority, high yield and low consumption of the whole calcination system. The raw material enters the preheater from the raw material warehouse for preheating and decomposition, and then enters the kiln for calcination. After calcination, the clinker enters the fourth-generation grate cooler. Grate cooler is mainly to reduce the clinker temperature, and the role of the heat contained in the clinker for multiple use, while the heat in the form of secondary air, tertiary air return to the kiln, preheater and waste heat power generation system. Finally, the qualified clinker is transported to the clinker warehouse through the clinker inclined zipper.
After a short follow-up study, I not only buried the "seed " for safe production, but also got a preliminary understanding of the role of common raw materials in the cement production process. Only by laying a good foundation and communicating in the same industry, can we not get stage fright because we do not understand the use of equipment and the role of various raw materials, and have more communication with customers in the front line of the market. If I want to do a good job in cement business, I also need to be more proficient in cement knowledge and marketing knowledge, and dare to innovate, constantly improve my business skills, and be a qualified salesman. (Chen Jianfei)
At the production site, the most is the production equipment, and the most important thing to pay attention to is the mechanical injury. Before the equipment is turned on, the central control room will definitely notify the on-site inspection personnel to carry out detailed inspection on the site to confirm that no one can turn on the mechanical parts and belt conveyor on the site. There are large pieces of material and other abnormal conditions on site, which need to be dredged manually. The first thing to do is to notify the central control room to stop the equipment to prevent problems before they occur. When working, we should wear masks, protective clothing and earplugs for noisy equipment. When cleaning up the smoke room, there must be two or more people present, wearing fire-proof clothing, fire-proof caps and fire-proof covers, and there will be other on-site personnel to assist to ensure the safety of the operators.
During the two months of studying in the manufacturing department, I have a more comprehensive understanding of limestone mining, raw material crushing and pre-homogenization, raw material grinding, raw material homogenization, clinker calcination and cooling, cement powder, cement storage and homogenization, cement shipping and other processes. The site of the manufacturing department is roughly divided into five systems: raw meal, kiln, coal mill, cement mill and waste heat power generation. In addition to waste heat power generation, I have studied the inspection post of each system for a week, and have a better understanding of the production process and equipment of each system, as well as the matters needing attention in the usual inspection.
The two-month period is very short. Although it is a bit hard, in general, the harvest is far greater than the effort, and it also makes me realize many simple and simple truths. Every department and every post is indispensable, and no one can be careless, otherwise it will affect the work of the entire production line and the quality of the products. It also made me understand that only when production and sales cooperate with each other can enterprises produce and operate better. The study in the manufacturing department not only gave me a better understanding of the cement production process and cement professional knowledge, but also made me understand that in my new position, I must ask and learn more. Only by working with curiosity can I learn more knowledge. After that, I will continue to strengthen my study of cement production process and professional knowledge. Although I am a marketing position, it is difficult for me to establish a foothold in this industry without a solid foundation and a studious attitude.
(Yang Wentao)
The most important thing in the production workshop is to protect my own safety, so on the first day I entered the workshop to study, I first conducted level 3 safety education, training and examination. After entering the site, I started from the most basic job position, that is, the feeding position, which is mainly responsible for the normal feeding of raw materials and the inspection and dredging of clay belts and iron slag feeding ports. Most of my time is spent in clay feeding ports, iron powder weighing, clay belt heads and other places where materials are easy to accumulate. For me, who has never worked night shift, working all night has become the first big test. Every time after 2 in the morning, my eyes begin to strike. Neither drinking coffee nor washing my face can wake up my body. I remember one time when I was preparing to rest after cleaning the clay blanking port, I received a notice that the sandstone crusher was full of rubble. so at 2: 50 in the early morning, we started the cleaning work. because the construction space was relatively narrow, the dust all over the sky accompanied me for 2 hours of cleaning work, which was deeply imprinted in my memory. I was tired, hungry and sleepy, you can fall asleep almost anywhere.
In the first week of studying in the manufacturing department, I mainly experienced the work of the feeding post and learned the raw materials of the stacking shed. In the second week, I moved to the inspection post of the raw material system, mainly inspecting the normal operation of all equipment in the raw material system. When I followed the post worker to inspect together, he introduced the equipment and their operation principle to me in detail. In the third week, I went to the kiln system, which is the most critical part of cement production, and cleaned the crust in the smoke chamber and the accumulated material in the coal injection pipe at fixed points every day. In order to prevent injuries, protective measures need to be taken during work. After wearing fire-proof clothing and fire-proof cap, you can carry out high-pressure water gun skinning with the post worker. The daily inspection work is running in the preheater, which is as high as ,120 meters. Each floor swings the flap valve to prevent the flap valve from being stuck. At that time, I was also punished for not reporting to my superiors because the flap valve on the fourth floor was stuck. The fourth week is the last step into the cement production process - cement mill system study.
Through nearly two months of study in the manufacturing department, I have a better understanding of cement-related knowledge, but this is far from enough. If I want to be a qualified marketing personnel, I still need to enrich myself through continuous learning.
(Liu Chen Qian)
More information
Shanghai North Carolina passed the "Little Giant" annual acceptance
Recently, Shanghai Beika Pharmaceutical Technology Co., Ltd., a new member of Jianfeng Pharmaceutical Co., Ltd., successfully passed the annual acceptance of Shanghai science and technology "little giant" cultivation enterprise. In order to promote the independent innovation of enterprises, improve the core competitiveness of enterprises, enhance the competitive advantage of enterprises in domestic and foreign industries, and speed up the construction of scientific and technological innovation, Shanghai North Carolina applied for the Shanghai "Science and Technology Innovation Action Plan" science and technology "little giant" cultivation project in 2016 and was approved, becoming a member of 87 "little giant" cultivation enterprises in Shanghai in that year, with a project implementation period of 2 years. During the period of the Little Giant Cultivation Project, North Carolina completed the re-identification of Shanghai high-tech enterprises and the identification of Songjiang District Enterprise Technology Center. Songjiang District Enterprise Technology Center was evaluated as excellent, passed the certification of Shanghai Academician Expert Workstation, and passed the acceptance of Shanghai Patent Work Pilot Enterprises. A total of 4 invention patents were authorized, 12 invention patents were applied, 2 registered trademarks were applied, and 4 enterprise standards were formulated, there are 22 product testing reports. In 2017, Songjiang District's industry-university-research innovation project was approved and the project target was completed. Tinib drugs and their intermediates in non-small cell lung cancer (NSCLC) are the dominant varieties in North Carolina. In order to improve the existing tinib product line and consolidate the economic benefits and market share of this kind of products, North Carolina has not only conducted research and development on the latest generation of precision medical special-effect drugs such as cabozantinib (Cabozantinib) and ceritinib (Ceritinib), but also focused on the development of drug intermediates for tinib stars, which are hot spots in the pre-clinical research and development of generic drugs.
2020
07-31
The company held the 2017 Board of Directors and the Board of Supervisors
On April 20, Jiang Xiaomeng, chairman of the group company, presided over the 3rd meeting of the 10th board of directors of the company, and deliberated and passed 15 proposals and reports including the 2017 work report of the board of directors and the 2017 work report of the general manager. The general manager's report pointed out that in 2017, the company focused on the general work policy of "grasping trends, precise development, strengthening standards, improving quality, improving management, and enhancing efficiency", grasping the opportunities brought by economic structure optimization and industrial upgrading, and accelerating innovation Development, in-depth management integration, continuous improvement of management level, improvement of enterprise operation efficiency, strengthening of marketing expansion, and steady promotion of product sales growth, remarkable results have been achieved in technological innovation and technological transformation, the financial structure has been continuously improved, and the core competitiveness of enterprises has been further strengthened. The company achieved operating income of 2.827 billion yuan for the whole year, an increase of 18.81 percent over the same period last year, and realized net profit attributable to owners of the parent company of 348.4943 million yuan, an increase of 22.18 percent over the same period last year, another record high, with earnings per share of 1.01 yuan, achieving the best operating performance in the peak 60-year development process. Total assets at the end of the year were 4.176 billion yuan, an increase of 4.53 percent over the same period last year. In 2017, with the in-depth implementation of the national "One Belt One Road" initiative, cement off-peak production has been comprehensively promoted, industry environmental protection supervision has been further improved, energy conservation and consumption reduction supervision has become stricter, mergers and acquisitions have deepened, industry self-discipline awareness has continued to increase, and the cement industry supply-side structural reform has started.
2020
07-31
The peak represents the two sessions of Jinhua
From March 30 to April 3, March 31 to April 4, the second session of the seventh session of the Jinhua CPPCC and the third session of the seventh session of the Jinhua Municipal people's Congress were held successively. Three deputies to the National People's Congress and members of the CPPCC attended the meeting and actively offered suggestions and suggestions for the future development of Jinhua. Among the three performance suggestions put forward by Jiang Xiaomeng, chairman of the group company, two are about the real economy. He said that the development of the real economy in Jinhua City has encountered many bottlenecks in recent years. On the one hand, the operating costs of real enterprises have increased year by year and the profits have decreased, which has affected the development confidence and investment enthusiasm of entrepreneurs; on the other hand, the current new economic concepts are emerging one after another, and social capital is emerging. The loss of reality has caused a greater impact on the real economy. To this end, Jiang Xiaomeng suggested starting from five aspects to help Jinhua's real economy get rid of its predicament, that is, to create a good environment for investment and enterprises to enter households, such as competitive land elements, supporting public environmental protection facilities, and reasonable supporting industries. Development policies, abundant labor resources, etc.; the government conducts in-depth research on land, factories, taxes, subsidies, incentives, etc, further introduce various preferential policies and measures that are attractive and can stimulate the economic vitality of real enterprises; the combination of government investment promotion and "business investment promotion", and introduce corresponding guidance and incentive policies, through the introduction of business in gold enterprises, it is more convincing and easier to succeed; pay attention to helping existing local industrial enterprises and enhance their enthusiasm; vigorously promote outstanding business operators and entrepreneurs, and create a good atmosphere of respect for entrepreneurs, to boost the enthusiasm of the majority of entrepreneurs to invest in the construction of return home. About Small and Micro Enterprises
2020
07-31
Determination of "60th Anniversary of Entrepreneurship" Series of Activities
In 1958, the first batch of peak people started from scratch and began to build the first cement plant in Jinhua at the foot of peak mountain. Today, 60 years later, the small cement plant has developed into a cross industry and cross regional listed company. In order to commemorate the 60th anniversary of Jianfeng's entrepreneurship, the company decided to organize a series of activities. The activity plan has been basically determined by the group company's office meeting, and an activity leading group led by Jiang Xiaomeng, chairman of the group company, has been established. The group office meeting discussed and decided that the commemorative activities are based on the principles of grand, simple and meaningful. While enlivening the company's cultural atmosphere, concentrating efforts, and enhancing the friendship and exchange of all employees, it also inherits and carries forward the essence of corporate culture accumulated over a long period of time. In order to carry out the activity smoothly, the company decided to set up a leading group for the celebration of the 60th anniversary of entrepreneurship, with Jiang Xiaomeng, chairman of the group company, as the group leader and Yu Jianhong, general manager of the group company, as the deputy group leader. The group members include Huang Jinlong, Zhang Fengliang, Xiang Chongping, Chen Tianci, Zhu Jianwei, Lan Xiaolong and Qin Xuping. There is a celebration working group. The series of commemorative activities mainly include media publicity with the theme of "publicizing peak achievements and establishing peak image"; carrying out manuscripts, calligraphy, painting, photography, speeches and other activities with the theme of "knowing peak and loving peak" and the history of Jianfeng Group's entrepreneurial development as the content; a series of cultural and sports activities with the theme of "strengthening physique and revitalizing peak; the activity of" sending warmth "with the theme of" caring for employees and caring for employees "; the group company with the theme of" infinite scenery at the peak"
2020
07-31
Determination of "60th Anniversary of Entrepreneurship" Series of Activities
In 1958, the first batch of peak people started from scratch and began to build the first cement plant in Jinhua at the foot of peak mountain. Today, 60 years later, the small cement plant has developed into a cross industry and cross regional listed company. In order to commemorate the 60th anniversary of Jianfeng's entrepreneurship, the company decided to organize a series of activities. The activity plan has been basically determined by the group company's office meeting, and an activity leading group led by Jiang Xiaomeng, chairman of the group company, has been established. The group office meeting discussed and decided that the commemorative activities are based on the principles of grand, simple and meaningful. While enlivening the company's cultural atmosphere, concentrating efforts, and enhancing the friendship and exchange of all employees, it also inherits and carries forward the essence of corporate culture accumulated over a long period of time. In order to carry out the activity smoothly, the company decided to set up a leading group for the celebration of the 60th anniversary of entrepreneurship, with Jiang Xiaomeng, chairman of the group company, as the group leader and Yu Jianhong, general manager of the group company, as the deputy group leader. The group members include Huang Jinlong, Zhang Fengliang, Xiang Chongping, Chen Tianci, Zhu Jianwei, Lan Xiaolong and Qin Xuping. There is a celebration working group. The series of commemorative activities mainly include media publicity with the theme of "publicizing peak achievements and establishing peak image"; carrying out manuscripts, calligraphy, painting, photography, speeches and other activities with the theme of "knowing peak and loving peak" and the history of Jianfeng Group's entrepreneurial development as the content; a series of cultural and sports activities with the theme of "strengthening physique and revitalizing peak; the activity of" sending warmth "with the theme of" caring for employees and caring for employees "; the group company with the theme of" infinite scenery at the peak"
2020
07-30
Determination of "60th Anniversary of Entrepreneurship" Series of Activities
In 1958, the first batch of peak people started from scratch and began to build the first cement plant in Jinhua at the foot of peak mountain. Today, 60 years later, the small cement plant has developed into a cross industry and cross regional listed company. In order to commemorate the 60th anniversary of Jianfeng's entrepreneurship, the company decided to organize a series of activities. The activity plan has been basically determined by the group company's office meeting, and an activity leading group led by Jiang Xiaomeng, chairman of the group company, has been established. The group office meeting discussed and decided that the commemorative activities are based on the principles of grand, simple and meaningful. While enlivening the company's cultural atmosphere, concentrating efforts, and enhancing the friendship and exchange of all employees, it also inherits and carries forward the essence of corporate culture accumulated over a long period of time. In order to carry out the activity smoothly, the company decided to set up a leading group for the celebration of the 60th anniversary of entrepreneurship, with Jiang Xiaomeng, chairman of the group company, as the group leader and Yu Jianhong, general manager of the group company, as the deputy group leader. The group members include Huang Jinlong, Zhang Fengliang, Xiang Chongping, Chen Tianci, Zhu Jianwei, Lan Xiaolong and Qin Xuping. There is a celebration working group. The series of commemorative activities mainly include media publicity with the theme of "publicizing peak achievements and establishing peak image"; carrying out manuscripts, calligraphy, painting, photography, speeches and other activities with the theme of "knowing peak and loving peak" and the history of Jianfeng Group's entrepreneurial development as the content; a series of cultural and sports activities with the theme of "strengthening physique and revitalizing peak; the activity of" sending warmth "with the theme of" caring for employees and caring for employees "; the group company with the theme of" infinite scenery at the peak"
2020
07-31
Contact Us
No. 88 Wujiang East Road, Jinhua City, Zhejiang Province, China
Tel: +86-579-82326868
Fax : +86-579-82324666
©2023 Zhejiang Jianfeng Group Co., Ltd. Powered by: www.300.cn SEO Business License
SAF Coolest v1.2 设置面板 SHJSS-AHDB-FSSQE-ZSW
无数据提示
Sorry, the current column has no content !
You can view other columns or return to Home Page