News Center

Home page

Peak Report

News reports

Huang Ping peak marketing staff manufacturing department learning work experience

Release time:

2022-04-06

Editor's Note: In order to strengthen the marketing staff's mastery of relevant business skills such as cement production enterprise process, cement theoretical knowledge, enterprise quality control, cement quality inspection process operation, etc., at the beginning of the New Year, Huang Ping Jianfeng Cement Company arranged marketing staff to practice in production positions in batches and stages to understand the cement production process. At present, some salesmen have completed the internship of the manufacturing department and summarized their internship work. This paper excerpts a part for everyone to share and learn.

Through 15 days of internship in different positions in the cement production line, I have a further understanding of the cement production process. At the same time, but also clearly aware of their lack of knowledge of cement.

to the manufacturing department on-site work and study, the first thing is safety education and training, which requires our employees to firmly establish the idea of safety first in their daily work, correctly handle the relationship between safety and production, and ensure the safe production of enterprises. In these 15 days, the place I stayed most was the kiln system, followed by the raw material system. We have to continuously inspect the entire production line every day to eliminate potential safety hazards in time. Wear masks and earplugs in places with a lot of dust and noise to reduce the impact of dust and noise on health. Every time the patrol inspection finds that there is a problem with the equipment or cleans up the smoke room and coal pipes, it is necessary to contact the central control through the interphone in the first place, and the central control can only start the operation after shutting down the equipment.

What I have to do every day in the kiln system is to check the flap valves in each layer of the preheater to prevent material accumulation, and then assist colleagues to clean up the clinker particles leaked from the smoke room, the coal pipe at the kiln head and the kiln head. During the operation, although I was assisting on the side, my colleagues still asked me to obey their instructions, wear a complete set of fire-proof clothing, and do a good job of safety protection to prevent safety accidents.

When studying the raw material system, my colleague introduced me to a small skill, which is to judge whether the raw material is qualified or not by the temperature of the V powder selector. Because the high and low temperature represents the high and low of the integrated moisture of the grinding material, the two are inversely proportional to the relationship. It can also be found that the chemical composition and content of the material will directly affect the kiln calcination operation and yield.

clinker is a hydraulic cementitious substance containing calcium oxide, silica, alumina and iron oxide, which is ground into fine powder and fired into partial melting state according to appropriate proportion, and calcium silicate is taken as the main mineral component. The mineral composition of clinker mainly includes tricalcium silicate, dicalcium silicate, tricalcium aluminate and tetralcium aluminate. The mineral with the largest content is tricalcium silicate, followed by dicalcium silicate. Cement clinker in the kiln system formation process, according to the temperature and reaction can be roughly divided into drying, preheating, firing and cooling. The six-stage preheater used by Huangping Peak can make better use of the waste heat of the waste gas discharged from the kiln and the decomposition furnace to heat the raw material, and the gas-solid dispersion is uniform, the heat exchange is rapid and the high energy separation is high, which improves the heat exchange efficiency between the gas and solid to a greater extent, and realizes the superiority, high yield and low consumption of the whole calcination system. The raw material enters the preheater from the raw material warehouse for preheating and decomposition, and then enters the kiln for calcination. After calcination, the clinker enters the fourth-generation grate cooler. Grate cooler is mainly to reduce the clinker temperature, and the role of the heat contained in the clinker for multiple use, while the heat in the form of secondary air, tertiary air return to the kiln, preheater and waste heat power generation system. Finally, the qualified clinker is transported to the clinker warehouse through the clinker inclined zipper.

After a short follow-up study, I not only buried the "seed " for safe production, but also got a preliminary understanding of the role of common raw materials in the cement production process. Only by laying a good foundation and communicating in the same industry, can we not get stage fright because we do not understand the use of equipment and the role of various raw materials, and have more communication with customers in the front line of the market. If I want to do a good job in cement business, I also need to be more proficient in cement knowledge and marketing knowledge, and dare to innovate, constantly improve my business skills, and be a qualified salesman. (Chen Jianfei)

At the production site, the most is the production equipment, and the most important thing to pay attention to is the mechanical injury. Before the equipment is turned on, the central control room will definitely notify the on-site inspection personnel to carry out detailed inspection on the site to confirm that no one can turn on the mechanical parts and belt conveyor on the site. There are large pieces of material and other abnormal conditions on site, which need to be dredged manually. The first thing to do is to notify the central control room to stop the equipment to prevent problems before they occur. When working, we should wear masks, protective clothing and earplugs for noisy equipment. When cleaning up the smoke room, there must be two or more people present, wearing fire-proof clothing, fire-proof caps and fire-proof covers, and there will be other on-site personnel to assist to ensure the safety of the operators.

During the two months of studying in the manufacturing department, I have a more comprehensive understanding of limestone mining, raw material crushing and pre-homogenization, raw material grinding, raw material homogenization, clinker calcination and cooling, cement powder, cement storage and homogenization, cement shipping and other processes. The site of the manufacturing department is roughly divided into five systems: raw meal, kiln, coal mill, cement mill and waste heat power generation. In addition to waste heat power generation, I have studied the inspection post of each system for a week, and have a better understanding of the production process and equipment of each system, as well as the matters needing attention in the usual inspection.

The two-month period is very short. Although it is a bit hard, in general, the harvest is far greater than the effort, and it also makes me realize many simple and simple truths. Every department and every post is indispensable, and no one can be careless, otherwise it will affect the work of the entire production line and the quality of the products. It also made me understand that only when production and sales cooperate with each other can enterprises produce and operate better. The study in the manufacturing department not only gave me a better understanding of the cement production process and cement professional knowledge, but also made me understand that in my new position, I must ask and learn more. Only by working with curiosity can I learn more knowledge. After that, I will continue to strengthen my study of cement production process and professional knowledge. Although I am a marketing position, it is difficult for me to establish a foothold in this industry without a solid foundation and a studious attitude.

(Yang Wentao)

The most important thing in the production workshop is to protect my own safety, so on the first day I entered the workshop to study, I first conducted level 3 safety education, training and examination. After entering the site, I started from the most basic job position, that is, the feeding position, which is mainly responsible for the normal feeding of raw materials and the inspection and dredging of clay belts and iron slag feeding ports. Most of my time is spent in clay feeding ports, iron powder weighing, clay belt heads and other places where materials are easy to accumulate. For me, who has never worked night shift, working all night has become the first big test. Every time after 2 in the morning, my eyes begin to strike. Neither drinking coffee nor washing my face can wake up my body. I remember one time when I was preparing to rest after cleaning the clay blanking port, I received a notice that the sandstone crusher was full of rubble. so at 2: 50 in the early morning, we started the cleaning work. because the construction space was relatively narrow, the dust all over the sky accompanied me for 2 hours of cleaning work, which was deeply imprinted in my memory. I was tired, hungry and sleepy, you can fall asleep almost anywhere.

In the first week of studying in the manufacturing department, I mainly experienced the work of the feeding post and learned the raw materials of the stacking shed. In the second week, I moved to the inspection post of the raw material system, mainly inspecting the normal operation of all equipment in the raw material system. When I followed the post worker to inspect together, he introduced the equipment and their operation principle to me in detail. In the third week, I went to the kiln system, which is the most critical part of cement production, and cleaned the crust in the smoke chamber and the accumulated material in the coal injection pipe at fixed points every day. In order to prevent injuries, protective measures need to be taken during work. After wearing fire-proof clothing and fire-proof cap, you can carry out high-pressure water gun skinning with the post worker. The daily inspection work is running in the preheater, which is as high as ,120 meters. Each floor swings the flap valve to prevent the flap valve from being stuck. At that time, I was also punished for not reporting to my superiors because the flap valve on the fourth floor was stuck. The fourth week is the last step into the cement production process - cement mill system study.

Through nearly two months of study in the manufacturing department, I have a better understanding of cement-related knowledge, but this is far from enough. If I want to be a qualified marketing personnel, I still need to enrich myself through continuous learning.

(Liu Chen Qian)

More information

The company fully deploys 2018 work

On January 27, the group company held a business analysis meeting to review and summarize the work in 2017, arrange and deploy the work for the new year, and put forward work requirements. At the meeting, various professional companies and directly affiliated enterprises reported on the overall work situation in 2017, focusing on analyzing the existing problems and deficiencies, and proposing corresponding solutions and work plans for 2018. Xiang Chongping, deputy general manager of the group company, systematically combed the current human resources efficiency and human resources development of the company. Chen Tianci, chairman of the board of supervisors, made a report and analysis on the "three reductions and three improvements" and the safety and environmental protection work in 2017. Lan Xiaolong, head of finance, analyzed the risks and challenges currently faced by the company according to the operating data and financial situation of its subordinate enterprises. The functional departments and offices of the headquarters also made a brief report on their annual work. Yu Jianhong, general manager of the group company, made a comprehensive review of the company's operation in 2017, compared and analyzed the main economic indicators of various industrial sectors, and pointed out that looking for new investment and development projects around strategic objectives, promoting the optimization of organizational structure and post setting, significantly improving the level of information management, improving the ability of fund management and tax planning, achieving certain results in scientific and technological innovation and technological transformation, and strengthening marketing management and market expansion, safety and environmental protection work is basically up to standard, training and talent development have achieved new results and other work highlights; at the same time, it summarizes and reflects on the shortcomings in strategic decision-making, management innovation, performance appraisal, market operation, and talent team building. After analyzing the current macroeconomic situation and the future trends of various related industries, Yu Jianhong informed

2020

07-31

Peak Pharmaceutical Invests in Shanghai North Carolina to Build API R & D and Production Base

News from our newspaper On January 19, the group company held the second meeting of the tenth board of directors and reviewed and approved the "Proposal on Foreign Investment of Subsidiary Jianfeng Pharmaceutical." On the same day, Jianfeng Pharmaceutical signed an agreement to invest in Shanghai North Carolina Pharmaceutical Technology Co., Ltd. (hereinafter referred to as "Shanghai North Carolina") by acquiring shares and increasing capital. Shanghai Beika is a high-tech enterprise in Shanghai. It has an academician expert workstation and a number of Shanghai high-tech achievements transformation projects. It has won the title of "second prize for scientific and technological progress" in Songjiang District, Shanghai, "patent pilot enterprise" and "enterprise technology center" in Songjiang District, Shanghai. The company has strong research and development capabilities and has obtained 14 patents. At present, its main business is to provide products and customized services for domestic and foreign pharmaceutical companies. The products mainly include Tinib, alkaloids, carbohydrates and other anti-tumor drug intermediates. The customized services are mainly CDMO (contract development and manufacturing) of new drugs and intermediates. Shanghai North Carolina has two wholly-owned subsidiaries, Anhui Changtai Chemical Co., Ltd. (hereinafter referred to as "Changtai Chemical") and Anhui North Carolina Pharmaceutical Co., Ltd. (hereinafter referred to as "Anhui North Carolina"). Changtai Chemical is a pesticide manufacturer designated by the Ministry of Industry and Information Technology. It was established in July 2007. It now has three chemical synthesis workshops and a pesticide preparation compounding workshop, with 10 product approvals and 13 patents. Anhui North Carolina was established in December 2016. Its business scope includes the customization, production and sales of chemical raw materials and pharmaceutical intermediates, and the wholesale and retail of chemical raw materials and products (except hazardous chemicals

2020

07-30

Peak Pharmaceutical Invests in Shanghai North Carolina to Build API R & D and Production Base

2020

07-31

Jianfeng Pharmaceutical was rated as a provincial trademark brand demonstration enterprise

On December 28, 2017, Zhejiang Administration for Industry and Commerce announced the list of trademark brand demonstration counties (cities, districts), demonstration towns (streets) and demonstration enterprises in Zhejiang Province in 2017. Jianfeng Pharmaceutical Company was identified as a trademark brand demonstration enterprise, and it was also the only enterprise in Jinhua City to enter the list. Peak Pharmaceutical was established in 1998 and obtained the first registered trademark in 1999. Since then, Jianfeng Pharmaceutical has been actively carrying out brand building in accordance with the requirements of the Trademark Law and other laws and regulations, and has set up an intellectual property department to carry out trademark management, rights protection and other activities; it has established a sound trademark management system, strictly in accordance with the provisions of the Trademark Law to supervise and manage the use of trademarks inside and outside the enterprise, and safeguard the legitimate rights and interests of the enterprise. Establish strategic cooperation with professional institutions, for trademark applications, renewals and other work. In recent years, Jianfeng Pharmaceutical has also explored trademark investment, creating value through intangible assets such as trademarks and brands, promoting efficiency improvement, and further expanding corporate influence; at the same time, it has continuously increased investment in new product research and development and technological transformation, and actively Declare various patents to provide strong support for brand building with technological innovation. According to incomplete statistics, Jianfeng Pharmaceutical and its subsidiaries currently have more than 120 valid trademarks, including 1 well-known trademark in China, 2 well-known trademarks in Zhejiang Province, 5 well-known trademarks in Jinhua City, and 2 overseas registered trademarks; Obtained more than 40 domestic and international patents. Trademark is an important part of intellectual property rights, in the knowledge economy, brand effect is increasingly becoming the leading force of economic development.

2020

07-31

Peak Pharmaceutical Invests in Shanghai North Carolina to Build API R & D and Production Base

2020

07-31

The company was rated as an advanced unit of the city's focus on talent and love talent.

News from our newspaper On December 11, the Talent Work Leading Group of the Jinhua Municipal Committee of the Communist Party of China commended the advanced units of Jinhua City that value talents and love talents. 36 units including Jianfeng Group won this honor. The selection of advanced units that value talents and love talents is a measure taken by the Jinhua Municipal Party Committee to further create a good atmosphere of focusing on talents and loving talents, fully respect and make good use of the first resource of talents, serve innovation to drive development, and implement the development strategy of strengthening the province with talents and innovation. The enterprises and institutions that have won this honorary title have always regarded talents as the fundamental driving force for development for a long time, regarded the investment of talents as the most effective investment, and integrated the love of talents into the unit culture. Remarkable achievements have been made in gathering talents, achieving talents, transforming and upgrading, and accelerating development. The Jinhua Municipal Party Committee requires the majority of employers to learn from advanced units, vigorously promote the trend of focusing on talents and loving talents, remove the obstacles to the talent development system and mechanism, and in accordance with the requirements of "walking in the forefront and jointly building Jinhua", in order to promote the construction of a modern metropolitan area and accelerate the construction of the province An important growth pole for high-quality development provides talent support and intellectual guarantee. (this newspaper reporter)

2020

07-31

< 1...38 39 40...61 > 跳转到页