News Center

Home page

Peak Report

News reports

Huang Ping peak marketing staff manufacturing department learning work experience

Release time:

2022-04-06

Editor's Note: In order to strengthen the marketing staff's mastery of relevant business skills such as cement production enterprise process, cement theoretical knowledge, enterprise quality control, cement quality inspection process operation, etc., at the beginning of the New Year, Huang Ping Jianfeng Cement Company arranged marketing staff to practice in production positions in batches and stages to understand the cement production process. At present, some salesmen have completed the internship of the manufacturing department and summarized their internship work. This paper excerpts a part for everyone to share and learn.

Through 15 days of internship in different positions in the cement production line, I have a further understanding of the cement production process. At the same time, but also clearly aware of their lack of knowledge of cement.

to the manufacturing department on-site work and study, the first thing is safety education and training, which requires our employees to firmly establish the idea of safety first in their daily work, correctly handle the relationship between safety and production, and ensure the safe production of enterprises. In these 15 days, the place I stayed most was the kiln system, followed by the raw material system. We have to continuously inspect the entire production line every day to eliminate potential safety hazards in time. Wear masks and earplugs in places with a lot of dust and noise to reduce the impact of dust and noise on health. Every time the patrol inspection finds that there is a problem with the equipment or cleans up the smoke room and coal pipes, it is necessary to contact the central control through the interphone in the first place, and the central control can only start the operation after shutting down the equipment.

What I have to do every day in the kiln system is to check the flap valves in each layer of the preheater to prevent material accumulation, and then assist colleagues to clean up the clinker particles leaked from the smoke room, the coal pipe at the kiln head and the kiln head. During the operation, although I was assisting on the side, my colleagues still asked me to obey their instructions, wear a complete set of fire-proof clothing, and do a good job of safety protection to prevent safety accidents.

When studying the raw material system, my colleague introduced me to a small skill, which is to judge whether the raw material is qualified or not by the temperature of the V powder selector. Because the high and low temperature represents the high and low of the integrated moisture of the grinding material, the two are inversely proportional to the relationship. It can also be found that the chemical composition and content of the material will directly affect the kiln calcination operation and yield.

clinker is a hydraulic cementitious substance containing calcium oxide, silica, alumina and iron oxide, which is ground into fine powder and fired into partial melting state according to appropriate proportion, and calcium silicate is taken as the main mineral component. The mineral composition of clinker mainly includes tricalcium silicate, dicalcium silicate, tricalcium aluminate and tetralcium aluminate. The mineral with the largest content is tricalcium silicate, followed by dicalcium silicate. Cement clinker in the kiln system formation process, according to the temperature and reaction can be roughly divided into drying, preheating, firing and cooling. The six-stage preheater used by Huangping Peak can make better use of the waste heat of the waste gas discharged from the kiln and the decomposition furnace to heat the raw material, and the gas-solid dispersion is uniform, the heat exchange is rapid and the high energy separation is high, which improves the heat exchange efficiency between the gas and solid to a greater extent, and realizes the superiority, high yield and low consumption of the whole calcination system. The raw material enters the preheater from the raw material warehouse for preheating and decomposition, and then enters the kiln for calcination. After calcination, the clinker enters the fourth-generation grate cooler. Grate cooler is mainly to reduce the clinker temperature, and the role of the heat contained in the clinker for multiple use, while the heat in the form of secondary air, tertiary air return to the kiln, preheater and waste heat power generation system. Finally, the qualified clinker is transported to the clinker warehouse through the clinker inclined zipper.

After a short follow-up study, I not only buried the "seed " for safe production, but also got a preliminary understanding of the role of common raw materials in the cement production process. Only by laying a good foundation and communicating in the same industry, can we not get stage fright because we do not understand the use of equipment and the role of various raw materials, and have more communication with customers in the front line of the market. If I want to do a good job in cement business, I also need to be more proficient in cement knowledge and marketing knowledge, and dare to innovate, constantly improve my business skills, and be a qualified salesman. (Chen Jianfei)

At the production site, the most is the production equipment, and the most important thing to pay attention to is the mechanical injury. Before the equipment is turned on, the central control room will definitely notify the on-site inspection personnel to carry out detailed inspection on the site to confirm that no one can turn on the mechanical parts and belt conveyor on the site. There are large pieces of material and other abnormal conditions on site, which need to be dredged manually. The first thing to do is to notify the central control room to stop the equipment to prevent problems before they occur. When working, we should wear masks, protective clothing and earplugs for noisy equipment. When cleaning up the smoke room, there must be two or more people present, wearing fire-proof clothing, fire-proof caps and fire-proof covers, and there will be other on-site personnel to assist to ensure the safety of the operators.

During the two months of studying in the manufacturing department, I have a more comprehensive understanding of limestone mining, raw material crushing and pre-homogenization, raw material grinding, raw material homogenization, clinker calcination and cooling, cement powder, cement storage and homogenization, cement shipping and other processes. The site of the manufacturing department is roughly divided into five systems: raw meal, kiln, coal mill, cement mill and waste heat power generation. In addition to waste heat power generation, I have studied the inspection post of each system for a week, and have a better understanding of the production process and equipment of each system, as well as the matters needing attention in the usual inspection.

The two-month period is very short. Although it is a bit hard, in general, the harvest is far greater than the effort, and it also makes me realize many simple and simple truths. Every department and every post is indispensable, and no one can be careless, otherwise it will affect the work of the entire production line and the quality of the products. It also made me understand that only when production and sales cooperate with each other can enterprises produce and operate better. The study in the manufacturing department not only gave me a better understanding of the cement production process and cement professional knowledge, but also made me understand that in my new position, I must ask and learn more. Only by working with curiosity can I learn more knowledge. After that, I will continue to strengthen my study of cement production process and professional knowledge. Although I am a marketing position, it is difficult for me to establish a foothold in this industry without a solid foundation and a studious attitude.

(Yang Wentao)

The most important thing in the production workshop is to protect my own safety, so on the first day I entered the workshop to study, I first conducted level 3 safety education, training and examination. After entering the site, I started from the most basic job position, that is, the feeding position, which is mainly responsible for the normal feeding of raw materials and the inspection and dredging of clay belts and iron slag feeding ports. Most of my time is spent in clay feeding ports, iron powder weighing, clay belt heads and other places where materials are easy to accumulate. For me, who has never worked night shift, working all night has become the first big test. Every time after 2 in the morning, my eyes begin to strike. Neither drinking coffee nor washing my face can wake up my body. I remember one time when I was preparing to rest after cleaning the clay blanking port, I received a notice that the sandstone crusher was full of rubble. so at 2: 50 in the early morning, we started the cleaning work. because the construction space was relatively narrow, the dust all over the sky accompanied me for 2 hours of cleaning work, which was deeply imprinted in my memory. I was tired, hungry and sleepy, you can fall asleep almost anywhere.

In the first week of studying in the manufacturing department, I mainly experienced the work of the feeding post and learned the raw materials of the stacking shed. In the second week, I moved to the inspection post of the raw material system, mainly inspecting the normal operation of all equipment in the raw material system. When I followed the post worker to inspect together, he introduced the equipment and their operation principle to me in detail. In the third week, I went to the kiln system, which is the most critical part of cement production, and cleaned the crust in the smoke chamber and the accumulated material in the coal injection pipe at fixed points every day. In order to prevent injuries, protective measures need to be taken during work. After wearing fire-proof clothing and fire-proof cap, you can carry out high-pressure water gun skinning with the post worker. The daily inspection work is running in the preheater, which is as high as ,120 meters. Each floor swings the flap valve to prevent the flap valve from being stuck. At that time, I was also punished for not reporting to my superiors because the flap valve on the fourth floor was stuck. The fourth week is the last step into the cement production process - cement mill system study.

Through nearly two months of study in the manufacturing department, I have a better understanding of cement-related knowledge, but this is far from enough. If I want to be a qualified marketing personnel, I still need to enrich myself through continuous learning.

(Liu Chen Qian)

More information

The company was rated as an advanced unit of the city's focus on talent and love talent.

News from our newspaper On December 11, the Talent Work Leading Group of the Jinhua Municipal Committee of the Communist Party of China commended the advanced units of Jinhua City that value talents and love talents. 36 units including Jianfeng Group won this honor. The selection of advanced units that value talents and love talents is a measure taken by the Jinhua Municipal Party Committee to further create a good atmosphere of focusing on talents and loving talents, fully respect and make good use of the first resource of talents, serve innovation to drive development, and implement the development strategy of strengthening the province with talents and innovation. The enterprises and institutions that have won this honorary title have always regarded talents as the fundamental driving force for development for a long time, regarded the investment of talents as the most effective investment, and integrated the love of talents into the unit culture. Remarkable achievements have been made in gathering talents, achieving talents, transforming and upgrading, and accelerating development. The Jinhua Municipal Party Committee requires the majority of employers to learn from advanced units, vigorously promote the trend of focusing on talents and loving talents, remove the obstacles to the talent development system and mechanism, and in accordance with the requirements of "walking in the forefront and jointly building Jinhua", in order to promote the construction of a modern metropolitan area and accelerate the construction of the province An important growth pole for high-quality development provides talent support and intellectual guarantee. (this newspaper reporter)

2020

07-31

The company was rated as an advanced unit of the city's focus on talent and love talent.

2020

07-30

Peak Pharmaceutical Becomes National Intellectual Property Demonstration Enterprise

Just one year after it was identified as a national intellectual property advantage enterprise in 2016, "Zhejiang Jianfeng Pharmaceutical Co., Ltd." appeared in the list of national intellectual property demonstration enterprises in 2017 recently announced by the State Intellectual Property Office. As a result, Jianfeng Pharmaceutical has become the first and only national intellectual property demonstration enterprise in Jinhua City. On December 12, the State Intellectual Property Office issued a notice to announce the list of national intellectual property demonstration enterprises and advantageous enterprises in 2017. After the enterprise declaration, the recommendation of the provincial and municipal bureaus, the review of the national bureau, and the public announcement, 182 national intellectual property demonstration enterprises and 816 national intellectual property advantage enterprises have been identified. Including Jianfeng Pharmaceutical, Zhejiang Province has been identified as only 15 national intellectual property demonstration enterprises. With the continuous development of enterprises in recent years, Jianfeng Pharmaceutical has set up a special working organization to cultivate and improve the intellectual property ability from the aspects of strategic management, creation, operation and protection of intellectual property rights. It has successively compiled and implemented 27 procedural documents and 36 forms such as "Intellectual Property Management Manual", "Intellectual Property Reward and Punishment System" and "Trade Secret Management System, and timely according to the policy, the current situation of the enterprise to revise, in order to ensure the compliance and effectiveness of the operation of the system. In 2012 and 2013, Jianfeng Pharmaceutical was successively rated as a patent demonstration enterprise in Jinhua City and Zhejiang Province; in 2013, it won the third prize of Jinhua Patent Implementation Award; in 2016, it passed the certification of intellectual property management system and was identified as a national intellectual property advantage enterprise. Currently, Peak Pharmaceuticals has

2020

07-31

Jianfeng Pharmaceutical Approved to Set up Provincial Research Institute

A few days ago, the relevant departments of Zhejiang Province approved the establishment of the provincial research institute of the peak pharmaceutical company. This is another honor won by Jianfeng Pharmaceutical in the field of independent research and development and scientific and technological innovation after the national postdoctoral research workstation and Zhejiang academician expert workstation. The provincial enterprise research institute is a high-level R & D institution led by the Provincial Department of Science and Technology, jointly recognized by the Provincial Economic and Information Commission and the Provincial Development and Reform Commission. As an important part of the national technological innovation system, the Enterprise Research Institute is the core force of the innovation-driven development of Jianfeng Pharmaceutical, which reflects the ability of Jianfeng Pharmaceutical to set up higher-level and higher-level R & D institutions on its own. the ability to gather and integrate innovation elements, organize scientific and technological innovation, support the sustainable development of enterprises, and lead the technological progress of the industry. As a pharmaceutical enterprise, scientific and technological innovation is the eternal theme of enterprise development, and talent is the key to scientific and technological innovation. Over the years, Jianfeng Pharmaceutical has not only focused on cultivating its own scientific research talents, but also established close cooperative relations with well-known universities and scientific research institutions such as China Pharmaceutical University, Shenyang Pharmaceutical University, Sichuan Antibiotic Industry Research Institute, and also focused on introducing top think tanks. In 2011, Professor Liu Jiajian and his team from Sichuan Institute of Antibiotic Industry were introduced, focusing on the technical research of key intermediates of methoxy cephalosporin. In 2013, Professor Shan Weiguang and his scientific research team from Zhejiang University of Technology were introduced to carry out research on preparation technology. In 2015, Professor Wang Guangji, academician of the Chinese Academy of Engineering, was hired as the chief scientist to organize the research on the anti-drug resistance mechanism of national class I new drugs by intracellular pharmacokinetics. In 2017 with Shanghai antibody

2020

07-31

The company elects a new board of directors and the board of supervisors to appoint a new management team

On November 16, the company held the first extraordinary general meeting of shareholders in 2017, which deliberated and passed the proposal on the expiration of the term of the board of directors and the proposal on the expiration of the term of the board of supervisors, and elected a new board of directors and the board of supervisors. The meeting used a combination of on-site registered voting and online voting to vote on director candidates one by one, and elected Jiang Xiaomeng, Du Zihong, Yu Jianhong, Huang Sujian, Liu Bo, Zhang Guoping, Huang Conyun, Sun Hongbin, and Shi Ximin as the company's tenth board of directors. Directors, of which Huang Conyun, Sun Hongbin, and Shi Ximin are independent directors. The meeting used a combination of on-site registered voting and online voting to vote on supervisor candidates one by one, and elected Chen Tianci, Lu Ruimei, and Shi Fu as supervisors of the company's ninth board of supervisors. Prior to this, the company's trade union held an enlarged meeting of the trade union committee to elect Qin Xuping and Jin Huazhong as employee representative supervisors of the ninth board of supervisors. On the same day, the company's tenth board of directors held its first meeting and elected Jiang Xiaomeng as the chairman of the tenth board of directors. Jiang Xiaomeng, Du Zihong, Huang Sujian, Sun Hongbin and Shi Ximin were elected as members of the Strategy Committee of the 10th Board of Directors, and Jiang Xiaomeng was the chairman of the Strategy Committee. Shi Ximin, Huang Conyun and Jiang Xiaomeng were elected as members of the audit committee of the 10th board of directors, and Shi Ximin was the chairman. Sun Hongbin, Huang Conyun and Jiang Xiaomeng were elected as members of the nomination committee of the 10th board of directors, and Sun Hongbin was the chairman. Huang Cong Yun, Shi Ximin and Du Zihong were elected as members of the remuneration and assessment committee of the 10th board of directors, and Huang Cong Yun was the chairman. The board of directors appointed Yu Jianhong as the general manager of the company and appointed Huang Jinlong.

2020

07-31

Peak natural products pollution control results by the industry attention

As a leader in China's plant extracts industry, Tianjin Jianfeng Natural Products Company has achieved fruitful results in technological innovation. On October 26 and 27, at the 2017 Forum on improving the international competitiveness of China's plant extract industry held in Handan City, Hebei Province, Liu Dan, general manager of the company, delivered a speech entitled "prevention and control of water pollution in the field of plant extraction", introducing the successful experience of sewage treatment in the past five years, which was widely concerned by the participants. In recent years, environmental protection and ecology have become hot words for the development of enterprises and society. Due to the particularity of the plant extraction industry, pollution control in this industry has different characteristics and requirements from ordinary production enterprises. For example, sewage presents higher chroma, extremely low PH value, more suspended solids, high salinity, high concentration of COD, and different sewage water quality of different products. As the earliest enterprise producing opc grape seed extract in China, Natural Products Company has always attached great importance to the pollution control of plant extraction. For example, in the sewage treatment upgrading project implemented in 2016, ozone oxidation and biochemical methods were adopted to remove the remaining organic pollutants, increasing the sewage treatment capacity from 200 cubic meters per day to 500 cubic meters. The latest anaerobic sewage treatment technology is adopted, the COD emission value of the outlet is reduced to 60 mg per liter, which is far lower than the national first-class emission standard of 100 mg per liter. The new system adopts advanced oxidation reaction tower, ozonation method, field energy reactor and sludge adsorption reflux technology, which can quickly and efficiently treat organic pollutants with strong chemical stability without adding any chemicals.

2020

07-31

< 1...39 40 41...61 > 跳转到页