Huang Ping peak marketing staff manufacturing department learning work experience
Release time:
2022-04-06
Editor's Note: In order to strengthen the marketing staff's mastery of relevant business skills such as cement production enterprise process, cement theoretical knowledge, enterprise quality control, cement quality inspection process operation, etc., at the beginning of the New Year, Huang Ping Jianfeng Cement Company arranged marketing staff to practice in production positions in batches and stages to understand the cement production process. At present, some salesmen have completed the internship of the manufacturing department and summarized their internship work. This paper excerpts a part for everyone to share and learn.
Through 15 days of internship in different positions in the cement production line, I have a further understanding of the cement production process. At the same time, but also clearly aware of their lack of knowledge of cement.
to the manufacturing department on-site work and study, the first thing is safety education and training, which requires our employees to firmly establish the idea of safety first in their daily work, correctly handle the relationship between safety and production, and ensure the safe production of enterprises. In these 15 days, the place I stayed most was the kiln system, followed by the raw material system. We have to continuously inspect the entire production line every day to eliminate potential safety hazards in time. Wear masks and earplugs in places with a lot of dust and noise to reduce the impact of dust and noise on health. Every time the patrol inspection finds that there is a problem with the equipment or cleans up the smoke room and coal pipes, it is necessary to contact the central control through the interphone in the first place, and the central control can only start the operation after shutting down the equipment.
What I have to do every day in the kiln system is to check the flap valves in each layer of the preheater to prevent material accumulation, and then assist colleagues to clean up the clinker particles leaked from the smoke room, the coal pipe at the kiln head and the kiln head. During the operation, although I was assisting on the side, my colleagues still asked me to obey their instructions, wear a complete set of fire-proof clothing, and do a good job of safety protection to prevent safety accidents.
When studying the raw material system, my colleague introduced me to a small skill, which is to judge whether the raw material is qualified or not by the temperature of the V powder selector. Because the high and low temperature represents the high and low of the integrated moisture of the grinding material, the two are inversely proportional to the relationship. It can also be found that the chemical composition and content of the material will directly affect the kiln calcination operation and yield.
clinker is a hydraulic cementitious substance containing calcium oxide, silica, alumina and iron oxide, which is ground into fine powder and fired into partial melting state according to appropriate proportion, and calcium silicate is taken as the main mineral component. The mineral composition of clinker mainly includes tricalcium silicate, dicalcium silicate, tricalcium aluminate and tetralcium aluminate. The mineral with the largest content is tricalcium silicate, followed by dicalcium silicate. Cement clinker in the kiln system formation process, according to the temperature and reaction can be roughly divided into drying, preheating, firing and cooling. The six-stage preheater used by Huangping Peak can make better use of the waste heat of the waste gas discharged from the kiln and the decomposition furnace to heat the raw material, and the gas-solid dispersion is uniform, the heat exchange is rapid and the high energy separation is high, which improves the heat exchange efficiency between the gas and solid to a greater extent, and realizes the superiority, high yield and low consumption of the whole calcination system. The raw material enters the preheater from the raw material warehouse for preheating and decomposition, and then enters the kiln for calcination. After calcination, the clinker enters the fourth-generation grate cooler. Grate cooler is mainly to reduce the clinker temperature, and the role of the heat contained in the clinker for multiple use, while the heat in the form of secondary air, tertiary air return to the kiln, preheater and waste heat power generation system. Finally, the qualified clinker is transported to the clinker warehouse through the clinker inclined zipper.
After a short follow-up study, I not only buried the "seed " for safe production, but also got a preliminary understanding of the role of common raw materials in the cement production process. Only by laying a good foundation and communicating in the same industry, can we not get stage fright because we do not understand the use of equipment and the role of various raw materials, and have more communication with customers in the front line of the market. If I want to do a good job in cement business, I also need to be more proficient in cement knowledge and marketing knowledge, and dare to innovate, constantly improve my business skills, and be a qualified salesman. (Chen Jianfei)
At the production site, the most is the production equipment, and the most important thing to pay attention to is the mechanical injury. Before the equipment is turned on, the central control room will definitely notify the on-site inspection personnel to carry out detailed inspection on the site to confirm that no one can turn on the mechanical parts and belt conveyor on the site. There are large pieces of material and other abnormal conditions on site, which need to be dredged manually. The first thing to do is to notify the central control room to stop the equipment to prevent problems before they occur. When working, we should wear masks, protective clothing and earplugs for noisy equipment. When cleaning up the smoke room, there must be two or more people present, wearing fire-proof clothing, fire-proof caps and fire-proof covers, and there will be other on-site personnel to assist to ensure the safety of the operators.
During the two months of studying in the manufacturing department, I have a more comprehensive understanding of limestone mining, raw material crushing and pre-homogenization, raw material grinding, raw material homogenization, clinker calcination and cooling, cement powder, cement storage and homogenization, cement shipping and other processes. The site of the manufacturing department is roughly divided into five systems: raw meal, kiln, coal mill, cement mill and waste heat power generation. In addition to waste heat power generation, I have studied the inspection post of each system for a week, and have a better understanding of the production process and equipment of each system, as well as the matters needing attention in the usual inspection.
The two-month period is very short. Although it is a bit hard, in general, the harvest is far greater than the effort, and it also makes me realize many simple and simple truths. Every department and every post is indispensable, and no one can be careless, otherwise it will affect the work of the entire production line and the quality of the products. It also made me understand that only when production and sales cooperate with each other can enterprises produce and operate better. The study in the manufacturing department not only gave me a better understanding of the cement production process and cement professional knowledge, but also made me understand that in my new position, I must ask and learn more. Only by working with curiosity can I learn more knowledge. After that, I will continue to strengthen my study of cement production process and professional knowledge. Although I am a marketing position, it is difficult for me to establish a foothold in this industry without a solid foundation and a studious attitude.
(Yang Wentao)
The most important thing in the production workshop is to protect my own safety, so on the first day I entered the workshop to study, I first conducted level 3 safety education, training and examination. After entering the site, I started from the most basic job position, that is, the feeding position, which is mainly responsible for the normal feeding of raw materials and the inspection and dredging of clay belts and iron slag feeding ports. Most of my time is spent in clay feeding ports, iron powder weighing, clay belt heads and other places where materials are easy to accumulate. For me, who has never worked night shift, working all night has become the first big test. Every time after 2 in the morning, my eyes begin to strike. Neither drinking coffee nor washing my face can wake up my body. I remember one time when I was preparing to rest after cleaning the clay blanking port, I received a notice that the sandstone crusher was full of rubble. so at 2: 50 in the early morning, we started the cleaning work. because the construction space was relatively narrow, the dust all over the sky accompanied me for 2 hours of cleaning work, which was deeply imprinted in my memory. I was tired, hungry and sleepy, you can fall asleep almost anywhere.
In the first week of studying in the manufacturing department, I mainly experienced the work of the feeding post and learned the raw materials of the stacking shed. In the second week, I moved to the inspection post of the raw material system, mainly inspecting the normal operation of all equipment in the raw material system. When I followed the post worker to inspect together, he introduced the equipment and their operation principle to me in detail. In the third week, I went to the kiln system, which is the most critical part of cement production, and cleaned the crust in the smoke chamber and the accumulated material in the coal injection pipe at fixed points every day. In order to prevent injuries, protective measures need to be taken during work. After wearing fire-proof clothing and fire-proof cap, you can carry out high-pressure water gun skinning with the post worker. The daily inspection work is running in the preheater, which is as high as ,120 meters. Each floor swings the flap valve to prevent the flap valve from being stuck. At that time, I was also punished for not reporting to my superiors because the flap valve on the fourth floor was stuck. The fourth week is the last step into the cement production process - cement mill system study.
Through nearly two months of study in the manufacturing department, I have a better understanding of cement-related knowledge, but this is far from enough. If I want to be a qualified marketing personnel, I still need to enrich myself through continuous learning.
(Liu Chen Qian)
More information
The company's "three" cultivation through the stage of acceptance
Since November 2015 was included in the second batch of "three" cultivation pilot enterprises in Zhejiang Province, the company has carried out a series of related work in depth. On October 19, the implementation of the company's "three" cultivation project from January 2016 to September 2017 passed the phased acceptance organized by Jinhua Economic and Information Commission and Jinhua Finance Bureau. According to the requirements of the "three" cultivation pilot enterprise responsibility letter signed with Zhejiang Province, Jinhua City and Wucheng District, as of the end of September 2017, the company has invested 16.0772 million yuan in related projects, and has achieved remarkable results in improving management, improving automation and informatization level. For example, after the digital system of quality and cost control in the plant extraction workshop of Jianfeng Health Technology Company is put into use, the whole production process can be controlled and traceable, the product quality is more stable, the production safety is effectively guaranteed, the "three wastes" emission is greatly reduced, and the product cost is reduced by 20%. The electronic label system of the pharmaceutical company automatically addresses and accurately locates the drugs in and out of the warehouse, which reduces the error rate of the out and into the warehouse, and the location management can automatically display the information such as the location and quantity of the drugs, which improves the work efficiency of the warehouse logistics and effectively reduces the management cost. The pharmaceutical company's sales management information system integrates sales management, warehouse management, customer management, statistical analysis and other modules, realizes drug sales management and control functions according to the requirements of GMP and GSP specifications, and analyzes drug regions and sales volume through big data, which will judge drug consumption trends faster and more accurately and improve the accuracy of the company's drug sales decisions. Health
2020
07-31
The company's "three" cultivation through the stage of acceptance
Since November 2015 was included in the second batch of "three" cultivation pilot enterprises in Zhejiang Province, the company has carried out a series of related work in depth. On October 19, the implementation of the company's "three" cultivation project from January 2016 to September 2017 passed the phased acceptance organized by Jinhua Economic and Information Commission and Jinhua Finance Bureau. According to the requirements of the "three" cultivation pilot enterprise responsibility letter signed with Zhejiang Province, Jinhua City and Wucheng District, as of the end of September 2017, the company has invested 16.0772 million yuan in related projects, and has achieved remarkable results in improving management, improving automation and informatization level. For example, after the digital system of quality and cost control in the plant extraction workshop of Jianfeng Health Technology Company is put into use, the whole production process can be controlled and traceable, the product quality is more stable, the production safety is effectively guaranteed, the "three wastes" emission is greatly reduced, and the product cost is reduced by 20%. The electronic label system of the pharmaceutical company automatically addresses and accurately locates the drugs in and out of the warehouse, which reduces the error rate of the out and into the warehouse, and the location management can automatically display the information such as the location and quantity of the drugs, which improves the work efficiency of the warehouse logistics and effectively reduces the management cost. The pharmaceutical company's sales management information system integrates sales management, warehouse management, customer management, statistical analysis and other modules, realizes drug sales management and control functions according to the requirements of GMP and GSP specifications, and analyzes drug regions and sales volume through big data, which will judge drug consumption trends faster and more accurately and improve the accuracy of the company's drug sales decisions. Health
2020
07-30
Yunnan Jianfeng supplies cement directly to Wa State of Myanmar
Yunnan Jianfeng Cement Company not only consolidates the original domestic market, but also gives full play to the location advantages of the three counties (Lancang, Menglian and Ximeng) close to the border to continuously expand the foreign market. Recently, the marketing department took the initiative to step out of the country from the Mangxin port in Menglian County and successfully sold "Jianfeng" brand cement to the newly planned Jinhua Xiaozunhe Island Development Zone in the Wa State of Myanmar. With the rapid development of China's economy in recent years, Myanmar has also increased the development of the China-Myanmar border area year by year. In order to attract more Chinese tourists to spend in transit, the Wa State Government of Myanmar has planned the Jinhua Xiaozunhe Island Development Zone near China's Menglian Mangxin Port. After the development zone is completed, it will mainly focus on gambling, business hotels, and border trade. There is an estimated demand for about 80000 tons of cement. When Yunnan Jianfeng marketing personnel learned of the news, they went deep into the development zone many times to understand the situation and had extensive contact with customers. With the good reputation of Jianfeng Cement in southwest Yunnan in recent years, they successfully signed a supply contract with a commercial mixing station in the development zone. At present, Yunnan Jianfeng has directly supplied 1200 tons of cement through Mangxin Port, and is expected to win 80% of the cement supply business of the development project. The initiative of "Belt and Road Initiative" to open up the international channels of South Asia and Southeast Asia has brought new development opportunities to many enterprises. This time, Yunnan Jianfeng Marketing Department went abroad to seize the opportunity, breaking the previous practice that the company mainly relied on agents for cement export, and achieved a new breakthrough in directly connecting users, which not only increased revenue, but also further expanded the radiation scope of its own marketing network, so as to further expand the scope of going abroad in the future.
2020
07-31
The company's "three" cultivation through the stage of acceptance
Since November 2015 was included in the second batch of "three" cultivation pilot enterprises in Zhejiang Province, the company has carried out a series of related work in depth. On October 19, the implementation of the company's "three" cultivation project from January 2016 to September 2017 passed the phased acceptance organized by Jinhua Economic and Information Commission and Jinhua Finance Bureau. According to the requirements of the "three" cultivation pilot enterprise responsibility letter signed with Zhejiang Province, Jinhua City and Wucheng District, as of the end of September 2017, the company has invested 16.0772 million yuan in related projects, and has achieved remarkable results in improving management, improving automation and informatization level. For example, after the digital system of quality and cost control in the plant extraction workshop of Jianfeng Health Technology Company is put into use, the whole production process can be controlled and traceable, the product quality is more stable, the production safety is effectively guaranteed, the "three wastes" emission is greatly reduced, and the product cost is reduced by 20%. The electronic label system of the pharmaceutical company automatically addresses and accurately locates the drugs in and out of the warehouse, which reduces the error rate of the out and into the warehouse, and the location management can automatically display the information such as the location and quantity of the drugs, which improves the work efficiency of the warehouse logistics and effectively reduces the management cost. The pharmaceutical company's sales management information system integrates sales management, warehouse management, customer management, statistical analysis and other modules, realizes drug sales management and control functions according to the requirements of GMP and GSP specifications, and analyzes drug regions and sales volume through big data, which will judge drug consumption trends faster and more accurately and improve the accuracy of the company's drug sales decisions. Health
2020
07-31
"We were also praised by the traffic police." On September 26, when talking about the civilized travel volunteer activities a few days ago, Li Xuegen of the big pharmacy smiled and was very happy that his work was recognized. Starting from May this year, during the rush hour on the 5th and 20th of each month (weekends and holidays are postponed), there will be a group of volunteers wearing red vests and hats, holding signs with the words "courtesy of zebra crossing, civilized crossing of the road" to divert traffic at many intersections in the city. This is a civilized travel volunteer service activity carried out by Jinhua City to further promote civilized travel and persuade uncivilized behavior. As a civilized unit at the municipal level in Jinhua, Jianfeng Group's duty junction is at the intersection of Bayi North Street and Zhongshan West Road. Before the activity was carried out, as the organizer of the group company, the group office had deep concerns. The activity took a long time and required a lot of manpower. As an enterprise, under the condition of ensuring normal production, it was completed by employees in their spare time. Can it be continued? To this end, Xiang Chongping, the leader in charge of the group company, specially organized a meeting of the directors of the subordinate enterprise offices to mobilize and deploy the matter. The group office also specially established the QQ group of "Peak Civilized Travel Volunteer Service" to release the contents and arrangements of the activities, update the duty situation, and praise the small partners on duty. At the beginning of the activity, colleagues in the headquarters building took the lead in taking up their posts. The first class was Li Hong, Li Xia, Yang Liu and Lei Yuan of the finance department of the group company. Employees of the group office, the peak health experience hall, Qiubin Factory and the international trading company also took up their posts one after another. Other enterprises also took part in an orderly manner according to the duty schedule.
2020
07-31
Daye peak again won the national inspection big contrast "all-excellent award"
A few days ago, daye peak cement co., ltd won the "all-excellent award" in the 16th national cement quality index inspection comparison of "hongchao science and technology cup" organized by the national cement quality supervision and inspection center in 2017 ". The national cement quality index inspection is held every two years. It is the highest level competition in the cement industry. It aims to understand the current quality inspection level of China's cement industry through large-scale comparison, promote various cement inspection departments to improve the inspection quality, and provide accurate data for cement production and use. The results truly reflect the overall inspection level of national cement production enterprises and provincial building materials (cement) inspection stations, it represents the highest level of inspection technology in the cement industry. Over the years, Daye Peak has firmly established the concept of "quality is the life of an enterprise", always puts product quality control in the first place, and conducts daily inspections in strict accordance with the testing items and frequency specified by national standards. actively carry out inspection comparison with provincial and municipal cement quality inspection centers, improve the professional level of inspectors through skill training, and spot check the internal passwords of inspectors every month to strictly ensure the accuracy and reliability of data, to ensure that the quality of the factory cement to meet the market and customer demand, and further enhance the core competitiveness of enterprises. Since it was officially put into production in 2008, Daye Peak has participated in the national cement quality index inspection five times, and has achieved good results. Among them, it won the "All-Excellent Award" in 2009 and the "All-Qualified" in 2011, 2013 and 2015. Unit Award ". (Yang Huiping)
2020
07-31
Contact Us
No. 88 Wujiang East Road, Jinhua City, Zhejiang Province, China
Tel: +86-579-82326868
Fax : +86-579-82324666
©2023 Zhejiang Jianfeng Group Co., Ltd. Powered by: www.300.cn SEO Business License
SAF Coolest v1.2 设置面板 SHJSS-AHDB-FSSQE-ZSW
无数据提示
Sorry, the current column has no content !
You can view other columns or return to Home Page