News Center

Home page

Peak Report

News reports

Huang Ping peak marketing staff manufacturing department learning work experience

Release time:

2022-04-06

Editor's Note: In order to strengthen the marketing staff's mastery of relevant business skills such as cement production enterprise process, cement theoretical knowledge, enterprise quality control, cement quality inspection process operation, etc., at the beginning of the New Year, Huang Ping Jianfeng Cement Company arranged marketing staff to practice in production positions in batches and stages to understand the cement production process. At present, some salesmen have completed the internship of the manufacturing department and summarized their internship work. This paper excerpts a part for everyone to share and learn.

Through 15 days of internship in different positions in the cement production line, I have a further understanding of the cement production process. At the same time, but also clearly aware of their lack of knowledge of cement.

to the manufacturing department on-site work and study, the first thing is safety education and training, which requires our employees to firmly establish the idea of safety first in their daily work, correctly handle the relationship between safety and production, and ensure the safe production of enterprises. In these 15 days, the place I stayed most was the kiln system, followed by the raw material system. We have to continuously inspect the entire production line every day to eliminate potential safety hazards in time. Wear masks and earplugs in places with a lot of dust and noise to reduce the impact of dust and noise on health. Every time the patrol inspection finds that there is a problem with the equipment or cleans up the smoke room and coal pipes, it is necessary to contact the central control through the interphone in the first place, and the central control can only start the operation after shutting down the equipment.

What I have to do every day in the kiln system is to check the flap valves in each layer of the preheater to prevent material accumulation, and then assist colleagues to clean up the clinker particles leaked from the smoke room, the coal pipe at the kiln head and the kiln head. During the operation, although I was assisting on the side, my colleagues still asked me to obey their instructions, wear a complete set of fire-proof clothing, and do a good job of safety protection to prevent safety accidents.

When studying the raw material system, my colleague introduced me to a small skill, which is to judge whether the raw material is qualified or not by the temperature of the V powder selector. Because the high and low temperature represents the high and low of the integrated moisture of the grinding material, the two are inversely proportional to the relationship. It can also be found that the chemical composition and content of the material will directly affect the kiln calcination operation and yield.

clinker is a hydraulic cementitious substance containing calcium oxide, silica, alumina and iron oxide, which is ground into fine powder and fired into partial melting state according to appropriate proportion, and calcium silicate is taken as the main mineral component. The mineral composition of clinker mainly includes tricalcium silicate, dicalcium silicate, tricalcium aluminate and tetralcium aluminate. The mineral with the largest content is tricalcium silicate, followed by dicalcium silicate. Cement clinker in the kiln system formation process, according to the temperature and reaction can be roughly divided into drying, preheating, firing and cooling. The six-stage preheater used by Huangping Peak can make better use of the waste heat of the waste gas discharged from the kiln and the decomposition furnace to heat the raw material, and the gas-solid dispersion is uniform, the heat exchange is rapid and the high energy separation is high, which improves the heat exchange efficiency between the gas and solid to a greater extent, and realizes the superiority, high yield and low consumption of the whole calcination system. The raw material enters the preheater from the raw material warehouse for preheating and decomposition, and then enters the kiln for calcination. After calcination, the clinker enters the fourth-generation grate cooler. Grate cooler is mainly to reduce the clinker temperature, and the role of the heat contained in the clinker for multiple use, while the heat in the form of secondary air, tertiary air return to the kiln, preheater and waste heat power generation system. Finally, the qualified clinker is transported to the clinker warehouse through the clinker inclined zipper.

After a short follow-up study, I not only buried the "seed " for safe production, but also got a preliminary understanding of the role of common raw materials in the cement production process. Only by laying a good foundation and communicating in the same industry, can we not get stage fright because we do not understand the use of equipment and the role of various raw materials, and have more communication with customers in the front line of the market. If I want to do a good job in cement business, I also need to be more proficient in cement knowledge and marketing knowledge, and dare to innovate, constantly improve my business skills, and be a qualified salesman. (Chen Jianfei)

At the production site, the most is the production equipment, and the most important thing to pay attention to is the mechanical injury. Before the equipment is turned on, the central control room will definitely notify the on-site inspection personnel to carry out detailed inspection on the site to confirm that no one can turn on the mechanical parts and belt conveyor on the site. There are large pieces of material and other abnormal conditions on site, which need to be dredged manually. The first thing to do is to notify the central control room to stop the equipment to prevent problems before they occur. When working, we should wear masks, protective clothing and earplugs for noisy equipment. When cleaning up the smoke room, there must be two or more people present, wearing fire-proof clothing, fire-proof caps and fire-proof covers, and there will be other on-site personnel to assist to ensure the safety of the operators.

During the two months of studying in the manufacturing department, I have a more comprehensive understanding of limestone mining, raw material crushing and pre-homogenization, raw material grinding, raw material homogenization, clinker calcination and cooling, cement powder, cement storage and homogenization, cement shipping and other processes. The site of the manufacturing department is roughly divided into five systems: raw meal, kiln, coal mill, cement mill and waste heat power generation. In addition to waste heat power generation, I have studied the inspection post of each system for a week, and have a better understanding of the production process and equipment of each system, as well as the matters needing attention in the usual inspection.

The two-month period is very short. Although it is a bit hard, in general, the harvest is far greater than the effort, and it also makes me realize many simple and simple truths. Every department and every post is indispensable, and no one can be careless, otherwise it will affect the work of the entire production line and the quality of the products. It also made me understand that only when production and sales cooperate with each other can enterprises produce and operate better. The study in the manufacturing department not only gave me a better understanding of the cement production process and cement professional knowledge, but also made me understand that in my new position, I must ask and learn more. Only by working with curiosity can I learn more knowledge. After that, I will continue to strengthen my study of cement production process and professional knowledge. Although I am a marketing position, it is difficult for me to establish a foothold in this industry without a solid foundation and a studious attitude.

(Yang Wentao)

The most important thing in the production workshop is to protect my own safety, so on the first day I entered the workshop to study, I first conducted level 3 safety education, training and examination. After entering the site, I started from the most basic job position, that is, the feeding position, which is mainly responsible for the normal feeding of raw materials and the inspection and dredging of clay belts and iron slag feeding ports. Most of my time is spent in clay feeding ports, iron powder weighing, clay belt heads and other places where materials are easy to accumulate. For me, who has never worked night shift, working all night has become the first big test. Every time after 2 in the morning, my eyes begin to strike. Neither drinking coffee nor washing my face can wake up my body. I remember one time when I was preparing to rest after cleaning the clay blanking port, I received a notice that the sandstone crusher was full of rubble. so at 2: 50 in the early morning, we started the cleaning work. because the construction space was relatively narrow, the dust all over the sky accompanied me for 2 hours of cleaning work, which was deeply imprinted in my memory. I was tired, hungry and sleepy, you can fall asleep almost anywhere.

In the first week of studying in the manufacturing department, I mainly experienced the work of the feeding post and learned the raw materials of the stacking shed. In the second week, I moved to the inspection post of the raw material system, mainly inspecting the normal operation of all equipment in the raw material system. When I followed the post worker to inspect together, he introduced the equipment and their operation principle to me in detail. In the third week, I went to the kiln system, which is the most critical part of cement production, and cleaned the crust in the smoke chamber and the accumulated material in the coal injection pipe at fixed points every day. In order to prevent injuries, protective measures need to be taken during work. After wearing fire-proof clothing and fire-proof cap, you can carry out high-pressure water gun skinning with the post worker. The daily inspection work is running in the preheater, which is as high as ,120 meters. Each floor swings the flap valve to prevent the flap valve from being stuck. At that time, I was also punished for not reporting to my superiors because the flap valve on the fourth floor was stuck. The fourth week is the last step into the cement production process - cement mill system study.

Through nearly two months of study in the manufacturing department, I have a better understanding of cement-related knowledge, but this is far from enough. If I want to be a qualified marketing personnel, I still need to enrich myself through continuous learning.

(Liu Chen Qian)

More information

Zhang Yiwen, deputy director of the provincial science and technology department, visited the peak

News from our newspaper On July 17, Zhang Yiwen, deputy director of the Zhejiang Provincial Department of Science and Technology, and his entourage visited Jianfeng Group and had a discussion with leaders of group companies such as Jiang Xiaomeng and Yu Jianhong. Jiang Xiaomeng, chairman of the group company, introduced to Deputy Director Zhang Yiwen the development, business status, industrial structure adjustment, product innovation and research and development of Jianfeng Group in recent years from the cement, medicine and health sectors. Huang Jinlong, deputy general manager of the group company and general manager of the pharmaceutical company, emphatically introduced the industrial layout, scientific research level, innovative development direction, achievements, and research projects of the pharmaceutical company. The two sides also exchanged views on information docking, innovation project support, industrialization projects and other related issues. Deputy Director Zhang Yiwen fully affirmed Jianfeng's work in recent years. He said that since Jianfeng's old cement industry has moved to other provinces in recent years, he has paid less attention to it. He did not expect to do so well now. What is particularly gratifying is that Jianfeng pays attention to the investment in technological innovation while developing, and clarifies the development direction of "making the enterprise bigger and stronger". It is a listed company that allows shareholders to rest assured. (Reporter Ni Yingzhen)

2020

07-31

Zhang Yiwen, deputy director of the provincial science and technology department, visited the peak

2020

07-30

Jin Wensheng, director of the Municipal Economic and Information Commission, said in a survey that the peak should build a "the belt and road initiative" Zhejiang model.

"Jianfeng is the leader of Jinhua's state-owned industrial entities. Under the current situation of the'Belt and Road' and building the fourth largest metropolitan area in Zhejiang, it is necessary to give full play to the role of the main force and drive the development of the entire industry." On July 13, Jin Wensheng, director of Jinhua Economic and Information Commission, stressed this when he was doing a special survey at the peak. On the same day, Jin Wensheng and the heads of relevant business offices of the Economic and Information Commission came to the peak to conduct special investigations on the current transformation and upgrading of the building materials industry and how to give full play to the work of the Entrepreneur Association, and to have in-depth exchanges with the management team of the group company. Chairman Jiang Xiaomeng introduced in detail the adjustment of the company's industrial layout in recent years, the current operation of various industries and the development ideas in the next few years, which was unanimously affirmed by Jin Wensheng and his party. Jinhua City is currently striving to build the fourth largest metropolitan area in Zhejiang, and the development of industrial economy is one of the key factors to achieve this goal. Jin Wensheng introduced the industrial economic development plan of Jinhua City, hoping that the peak management will fully understand the situation, grasp the opportunity of "Belt and Road Initiative" and building the fourth metropolitan area, give full play to the management advantages, talent advantages, and capital advantages of established listed companies, make greater achievements in scientific and technological innovation and green manufacturing, and strive to become the Zhejiang model of "Belt and Road Initiative". So as to promote the common development of Jinhua industrial enterprises. The two sides also exchanged views on how to promote the transformation of Jinhua building materials industry, how to better play the role of organizations such as the Federation of Industry and Commerce, the Chamber of Commerce and the Entrepreneur Association, and how to do a good job in summer production safety. (Reporter Fu Yiwu)

2020

07-31

Teachers and Students of Zhejiang Gongshang University Visit Peak Health

News from our newspaper On the morning of June 9, a group of 18 teachers and students from Zhejiang Gongshang University came to Jianfeng Health for a visit and discussion, and conducted research on the establishment of Zhejiang Gongshang University Food Industrialization Research Institute in Jinhua. The leader of this visit is Professor Song Guanglei from the School of Food and Biological Engineering, Zhejiang Gongshang University. The teachers and students are mainly from the School of Food and Engineering, specializing in food science, food safety, biochemical and biotechnology, focusing on extraction and separation, functional activity and The research of functional food, in addition to the professor of the Department of E-commerce of the School of Management Engineering and E-commerce. Chen Daiyou, general manager of Jianfeng Health, Li Wende, deputy general manager, and relevant personnel from R & D, quality management, administrative personnel and other departments attended the forum. Li Wende introduced the basic situation, technical production level, scientific and technological research and development characteristics of Jianfeng Health Company in the form of PPT, as well as the relevant policies of Jinhua Municipal Government on talent introduction. Chen Daiyou focused on the development vision of Jianfeng Health Technology and the construction of scientific and technological talents, and welcomed graduate students from the Industrial and Commercial University to join the team of Jianfeng Health after graduation. Professor Song Guanglei fully affirmed the software and hardware facilities and humanistic management of Jianfeng Health Company. He said that most of the teachers and students who came to visit this time were professional in line with the industry of Jianfeng Health Company. The two sides could carry out in-depth cooperation in product development, technology upgrading and talent reserve. Fourteen graduate students also introduced their respective situations and study and research directions. After the symposium, the teachers and students visited the health company's testing center, R & D laboratory and plant extraction workshop with great interest.

2020

07-31

Relevant departments of provinces and cities come to peak to evaluate the harmonious index of labor relations.

On June 27, an investigation team led by Pan Weiliang, President of Zhejiang Academy of human resources and social security sciences, and composed of relevant responsible persons of provincial and municipal human resources and social security departments, came to peak to evaluate the harmonious index of labor relations. The index of harmonious labor relations is an important basis for reflecting the degree of harmonious labor relations in a region. Every year, Zhejiang Province collects data from 30 sample enterprises of different sizes and types in terms of employee labor contract signing, social insurance participation, collective contract signing, collective wage negotiation, trade union establishment, labor disputes and labor safety, etc., to evaluate the labor relations in the province. During the peak period, the investigation team exchanged views with Xiang Chongping, deputy general manager of the group company, Qin Xuping, chairman of the trade union, Tang Zhengren, manager of the human resources department, etc. on the status of peak labor relations, checked relevant documents and materials within the enterprise, and conducted relevant questionnaire surveys on some cadres and employees. (this newspaper reporter)

2020

07-31

Teachers and Students of Zhejiang Gongshang University Visit Peak Health

2020

07-30

< 1...44 45 46...61 > 跳转到页