Huang Ping peak marketing staff manufacturing department learning work experience
Release time:
2022-04-06
Editor's Note: In order to strengthen the marketing staff's mastery of relevant business skills such as cement production enterprise process, cement theoretical knowledge, enterprise quality control, cement quality inspection process operation, etc., at the beginning of the New Year, Huang Ping Jianfeng Cement Company arranged marketing staff to practice in production positions in batches and stages to understand the cement production process. At present, some salesmen have completed the internship of the manufacturing department and summarized their internship work. This paper excerpts a part for everyone to share and learn.
Through 15 days of internship in different positions in the cement production line, I have a further understanding of the cement production process. At the same time, but also clearly aware of their lack of knowledge of cement.
to the manufacturing department on-site work and study, the first thing is safety education and training, which requires our employees to firmly establish the idea of safety first in their daily work, correctly handle the relationship between safety and production, and ensure the safe production of enterprises. In these 15 days, the place I stayed most was the kiln system, followed by the raw material system. We have to continuously inspect the entire production line every day to eliminate potential safety hazards in time. Wear masks and earplugs in places with a lot of dust and noise to reduce the impact of dust and noise on health. Every time the patrol inspection finds that there is a problem with the equipment or cleans up the smoke room and coal pipes, it is necessary to contact the central control through the interphone in the first place, and the central control can only start the operation after shutting down the equipment.
What I have to do every day in the kiln system is to check the flap valves in each layer of the preheater to prevent material accumulation, and then assist colleagues to clean up the clinker particles leaked from the smoke room, the coal pipe at the kiln head and the kiln head. During the operation, although I was assisting on the side, my colleagues still asked me to obey their instructions, wear a complete set of fire-proof clothing, and do a good job of safety protection to prevent safety accidents.
When studying the raw material system, my colleague introduced me to a small skill, which is to judge whether the raw material is qualified or not by the temperature of the V powder selector. Because the high and low temperature represents the high and low of the integrated moisture of the grinding material, the two are inversely proportional to the relationship. It can also be found that the chemical composition and content of the material will directly affect the kiln calcination operation and yield.
clinker is a hydraulic cementitious substance containing calcium oxide, silica, alumina and iron oxide, which is ground into fine powder and fired into partial melting state according to appropriate proportion, and calcium silicate is taken as the main mineral component. The mineral composition of clinker mainly includes tricalcium silicate, dicalcium silicate, tricalcium aluminate and tetralcium aluminate. The mineral with the largest content is tricalcium silicate, followed by dicalcium silicate. Cement clinker in the kiln system formation process, according to the temperature and reaction can be roughly divided into drying, preheating, firing and cooling. The six-stage preheater used by Huangping Peak can make better use of the waste heat of the waste gas discharged from the kiln and the decomposition furnace to heat the raw material, and the gas-solid dispersion is uniform, the heat exchange is rapid and the high energy separation is high, which improves the heat exchange efficiency between the gas and solid to a greater extent, and realizes the superiority, high yield and low consumption of the whole calcination system. The raw material enters the preheater from the raw material warehouse for preheating and decomposition, and then enters the kiln for calcination. After calcination, the clinker enters the fourth-generation grate cooler. Grate cooler is mainly to reduce the clinker temperature, and the role of the heat contained in the clinker for multiple use, while the heat in the form of secondary air, tertiary air return to the kiln, preheater and waste heat power generation system. Finally, the qualified clinker is transported to the clinker warehouse through the clinker inclined zipper.
After a short follow-up study, I not only buried the "seed " for safe production, but also got a preliminary understanding of the role of common raw materials in the cement production process. Only by laying a good foundation and communicating in the same industry, can we not get stage fright because we do not understand the use of equipment and the role of various raw materials, and have more communication with customers in the front line of the market. If I want to do a good job in cement business, I also need to be more proficient in cement knowledge and marketing knowledge, and dare to innovate, constantly improve my business skills, and be a qualified salesman. (Chen Jianfei)
At the production site, the most is the production equipment, and the most important thing to pay attention to is the mechanical injury. Before the equipment is turned on, the central control room will definitely notify the on-site inspection personnel to carry out detailed inspection on the site to confirm that no one can turn on the mechanical parts and belt conveyor on the site. There are large pieces of material and other abnormal conditions on site, which need to be dredged manually. The first thing to do is to notify the central control room to stop the equipment to prevent problems before they occur. When working, we should wear masks, protective clothing and earplugs for noisy equipment. When cleaning up the smoke room, there must be two or more people present, wearing fire-proof clothing, fire-proof caps and fire-proof covers, and there will be other on-site personnel to assist to ensure the safety of the operators.
During the two months of studying in the manufacturing department, I have a more comprehensive understanding of limestone mining, raw material crushing and pre-homogenization, raw material grinding, raw material homogenization, clinker calcination and cooling, cement powder, cement storage and homogenization, cement shipping and other processes. The site of the manufacturing department is roughly divided into five systems: raw meal, kiln, coal mill, cement mill and waste heat power generation. In addition to waste heat power generation, I have studied the inspection post of each system for a week, and have a better understanding of the production process and equipment of each system, as well as the matters needing attention in the usual inspection.
The two-month period is very short. Although it is a bit hard, in general, the harvest is far greater than the effort, and it also makes me realize many simple and simple truths. Every department and every post is indispensable, and no one can be careless, otherwise it will affect the work of the entire production line and the quality of the products. It also made me understand that only when production and sales cooperate with each other can enterprises produce and operate better. The study in the manufacturing department not only gave me a better understanding of the cement production process and cement professional knowledge, but also made me understand that in my new position, I must ask and learn more. Only by working with curiosity can I learn more knowledge. After that, I will continue to strengthen my study of cement production process and professional knowledge. Although I am a marketing position, it is difficult for me to establish a foothold in this industry without a solid foundation and a studious attitude.
(Yang Wentao)
The most important thing in the production workshop is to protect my own safety, so on the first day I entered the workshop to study, I first conducted level 3 safety education, training and examination. After entering the site, I started from the most basic job position, that is, the feeding position, which is mainly responsible for the normal feeding of raw materials and the inspection and dredging of clay belts and iron slag feeding ports. Most of my time is spent in clay feeding ports, iron powder weighing, clay belt heads and other places where materials are easy to accumulate. For me, who has never worked night shift, working all night has become the first big test. Every time after 2 in the morning, my eyes begin to strike. Neither drinking coffee nor washing my face can wake up my body. I remember one time when I was preparing to rest after cleaning the clay blanking port, I received a notice that the sandstone crusher was full of rubble. so at 2: 50 in the early morning, we started the cleaning work. because the construction space was relatively narrow, the dust all over the sky accompanied me for 2 hours of cleaning work, which was deeply imprinted in my memory. I was tired, hungry and sleepy, you can fall asleep almost anywhere.
In the first week of studying in the manufacturing department, I mainly experienced the work of the feeding post and learned the raw materials of the stacking shed. In the second week, I moved to the inspection post of the raw material system, mainly inspecting the normal operation of all equipment in the raw material system. When I followed the post worker to inspect together, he introduced the equipment and their operation principle to me in detail. In the third week, I went to the kiln system, which is the most critical part of cement production, and cleaned the crust in the smoke chamber and the accumulated material in the coal injection pipe at fixed points every day. In order to prevent injuries, protective measures need to be taken during work. After wearing fire-proof clothing and fire-proof cap, you can carry out high-pressure water gun skinning with the post worker. The daily inspection work is running in the preheater, which is as high as ,120 meters. Each floor swings the flap valve to prevent the flap valve from being stuck. At that time, I was also punished for not reporting to my superiors because the flap valve on the fourth floor was stuck. The fourth week is the last step into the cement production process - cement mill system study.
Through nearly two months of study in the manufacturing department, I have a better understanding of cement-related knowledge, but this is far from enough. If I want to be a qualified marketing personnel, I still need to enrich myself through continuous learning.
(Liu Chen Qian)
More information
Spike Health will be identified as "Zhejiang Agricultural Science and Technology Enterprise"
Recently, Jinhua Science and Technology Bureau issued a public notice to identify four enterprises, including Zhejiang Jianfeng Health Technology Co., Ltd., as agricultural science and technology enterprises in Zhejiang Province. According to relevant requirements, agricultural science and technology enterprises in Zhejiang Province must take agricultural products as their main business, and have sound production and operation places, facilities and management systems. Scientific and technological personnel account for more than 15% of the total number of employees of the enterprise, and the annual sales income of the enterprise is more than 5 million yuan (of which the sales income of agricultural science and technology products and technical income account for more than 50% of the total income of the enterprise), presided over the county (city, district) or above science and technology projects, environmental protection to meet the national standards. Since its establishment, Jianfeng Health has attached great importance to the construction of innovation platform and the training of scientific and technological personnel. As of the end of 2016, scientific and technological personnel accounted for 17% of the total number of employees in the enterprise, and 76% of the technical personnel had bachelor's degree or above; the sales revenue of scientific and technological products accounted for about 90%; R & D expenses accounted for 8.9 of the total sales revenue; and undertook 3 scientific and technological projects above counties (cities, districts). After obtaining the honorary title of Jinhua agricultural science and technology enterprise in 2016, peak health applied for the recognition of the provincial agricultural science and technology enterprise. On the basis of the recommendation of the science and technology department of Wucheng District, through the evaluation links such as formal examination, on-the-spot investigation and expert evaluation and defense, Jianfeng Health will finally be awarded the accreditation. It is reported that the Jinhua Municipal Government and the Wucheng District Government will also give certain supporting funds to the enterprises that have obtained the honorary title. (Yang Hao)
2020
07-30
Spike Health will be identified as "Zhejiang Agricultural Science and Technology Enterprise"
Recently, Jinhua Science and Technology Bureau issued a public notice to identify four enterprises, including Zhejiang Jianfeng Health Technology Co., Ltd., as agricultural science and technology enterprises in Zhejiang Province. According to relevant requirements, agricultural science and technology enterprises in Zhejiang Province must take agricultural products as their main business, and have sound production and operation places, facilities and management systems. Scientific and technological personnel account for more than 15% of the total number of employees of the enterprise, and the annual sales income of the enterprise is more than 5 million yuan (of which the sales income of agricultural science and technology products and technical income account for more than 50% of the total income of the enterprise), presided over the county (city, district) or above science and technology projects, environmental protection to meet the national standards. Since its establishment, Jianfeng Health has attached great importance to the construction of innovation platform and the training of scientific and technological personnel. As of the end of 2016, scientific and technological personnel accounted for 17% of the total number of employees in the enterprise, and 76% of the technical personnel had bachelor's degree or above; the sales revenue of scientific and technological products accounted for about 90%; R & D expenses accounted for 8.9 of the total sales revenue; and undertook 3 scientific and technological projects above counties (cities, districts). After obtaining the honorary title of Jinhua agricultural science and technology enterprise in 2016, peak health applied for the recognition of the provincial agricultural science and technology enterprise. On the basis of the recommendation of the science and technology department of Wucheng District, through the evaluation links such as formal examination, on-the-spot investigation and expert evaluation and defense, Jianfeng Health will finally be awarded the accreditation. It is reported that the Jinhua Municipal Government and the Wucheng District Government will also give certain supporting funds to the enterprises that have obtained the honorary title. (Yang Hao)
2020
07-31
Spike Health will be identified as "Zhejiang Agricultural Science and Technology Enterprise"
Recently, Jinhua Science and Technology Bureau issued a public notice to identify four enterprises, including Zhejiang Jianfeng Health Technology Co., Ltd., as agricultural science and technology enterprises in Zhejiang Province. According to relevant requirements, agricultural science and technology enterprises in Zhejiang Province must take agricultural products as their main business, and have sound production and operation places, facilities and management systems. Scientific and technological personnel account for more than 15% of the total number of employees of the enterprise, and the annual sales income of the enterprise is more than 5 million yuan (of which the sales income of agricultural science and technology products and technical income account for more than 50% of the total income of the enterprise), presided over the county (city, district) or above science and technology projects, environmental protection to meet the national standards. Since its establishment, Jianfeng Health has attached great importance to the construction of innovation platform and the training of scientific and technological personnel. As of the end of 2016, scientific and technological personnel accounted for 17% of the total number of employees in the enterprise, and 76% of the technical personnel had bachelor's degree or above; the sales revenue of scientific and technological products accounted for about 90%; R & D expenses accounted for 8.9 of the total sales revenue; and undertook 3 scientific and technological projects above counties (cities, districts). After obtaining the honorary title of Jinhua agricultural science and technology enterprise in 2016, peak health applied for the recognition of the provincial agricultural science and technology enterprise. On the basis of the recommendation of the science and technology department of Wucheng District, through the evaluation links such as formal examination, on-the-spot investigation and expert evaluation and defense, Jianfeng Health will finally be awarded the accreditation. It is reported that the Jinhua Municipal Government and the Wucheng District Government will also give certain supporting funds to the enterprises that have obtained the honorary title. (Yang Hao)
2020
07-31
Zhejiang Jianfeng Group Co., Ltd. is a veteran enterprise in Jinhua. It has a history of 59 years since the first generation of Jianfeng people founded Jinhua cement Plant in 1958. From the initial small cement plant to the current cement, medicine, health products, warehousing and logistics as a supplement, cross-industry, cross-regional comprehensive enterprise group, the peak has embarked on its own development path. In the past two years, affected by the downward pressure on the economy, some companies have fallen into trouble, but the spikes have bucked the trend, and good news has spread frequently. In the past five years, the average annual profit of the peak has exceeded 0.25 billion yuan, and the total profit and tax paid has been 0.827 billion yuan. In the past 2016, operating income 2.379 billion and net profit 0.285 billion, creating the best result in peak history. The net profit in the first quarter report of 2017 was 0.112 billion yuan, setting a new quarterly record. Under the background of "walking in the forefront and jointly building Jinhua", this year, the Jinhua Municipal Party Committee and the Municipal Government proposed to vigorously promote the "three corridor construction" strategic deployment of comprehensive transportation corridors, Jinyichuang corridors, and Zhejiang ecological corridors. It has drawn a new blueprint for Jinhua's future economic and social development. In the face of new opportunities, Jiang Xiaomeng, chairman of Jianfeng Group, said that as the fourth largest metropolitan area in the province, the construction of Jinhua's "three corridors" will certainly have a positive and far-reaching impact on the trend of related industries and the positioning of enterprises in central Zhejiang. The majority of business operators and businessmen should actively participate in the new wave of reform and development, and seriously think about how to combine the construction needs of the "three corridors", give play to play to the enterprise itself, so as to catch the "big car" of Jinhua's economic development, in promoting the local
2020
07-31
Zhang Yiwen, deputy director of the provincial science and technology department, visited the peak
News from our newspaper On July 17, Zhang Yiwen, deputy director of the Zhejiang Provincial Department of Science and Technology, and his entourage visited Jianfeng Group and had a discussion with leaders of group companies such as Jiang Xiaomeng and Yu Jianhong. Jiang Xiaomeng, chairman of the group company, introduced to Deputy Director Zhang Yiwen the development, business status, industrial structure adjustment, product innovation and research and development of Jianfeng Group in recent years from the cement, medicine and health sectors. Huang Jinlong, deputy general manager of the group company and general manager of the pharmaceutical company, emphatically introduced the industrial layout, scientific research level, innovative development direction, achievements, and research projects of the pharmaceutical company. The two sides also exchanged views on information docking, innovation project support, industrialization projects and other related issues. Deputy Director Zhang Yiwen fully affirmed Jianfeng's work in recent years. He said that since Jianfeng's old cement industry has moved to other provinces in recent years, he has paid less attention to it. He did not expect to do so well now. What is particularly gratifying is that Jianfeng pays attention to the investment in technological innovation while developing, and clarifies the development direction of "making the enterprise bigger and stronger". It is a listed company that allows shareholders to rest assured. (Reporter Ni Yingzhen)
2020
07-31
News from our newspaper On July 13, the first council of the "Plant Waste Reuse Industry Technology Innovation Strategic Alliance" with Tianjin Jianfeng Natural Products Company as the chairman unit was grandly held in Tianjin, marking the formal establishment of the alliance. In order to cope with the new challenges brought about by economic transformation and upgrading, in recent years, Tianjin Economic and Technological Development Zone has continuously adjusted its industrial structure, actively introduced innovation carriers and resources, cultivated new growth points, and paid close attention to the support of scientific and technological enterprises. with the goal of cultivating a number of high-growth enterprises with innovative characteristics of the new era, making them the backbone of the economic development of the development zone and even Binhai New area and the main force of innovation and development. In November 2016, the development zone selected 20 science and technology enterprises in the zone as demonstration enterprises for the first time. Tianjin Jianfeng is one of them. With the support of relevant policies of Tianjin Municipal Party Committee and Municipal Government, Tianjin University of Science and Technology, Tianjin Agricultural College, Portuguese Mr. (Tianjin) Technology Co., Ltd., Tianjin Minsheng Biological Engineering Co., Ltd., Tianjin Yibei Red Biotechnology Co., Ltd. and other enterprises and institutions, start to establish the "Plant Waste Reuse Industry Technology Innovation Strategic Alliance" (hereinafter referred to as the "Alliance"), and carry out key technical cooperation research and development of "Plant Waste Reuse" for key health industries, and formulate, revise and promote industrial technology Standards, through the establishment of an open sharing of scientific and technological resources and industrial technology information exchange platform, to promote another new field of green health industry. The convening of the first council of the alliance has received extensive attention from relevant government departments, the media and the industry. Tianjin Science and Technology Commission, Binhai New Area Science and Technology Commission, Tianjin
2020
07-31
Contact Us
No. 88 Wujiang East Road, Jinhua City, Zhejiang Province, China
Tel: +86-579-82326868
Fax : +86-579-82324666
©2023 Zhejiang Jianfeng Group Co., Ltd. Powered by: www.300.cn SEO Business License
SAF Coolest v1.2 设置面板 SHJSS-AHDB-FSSQE-ZSW
无数据提示
Sorry, the current column has no content !
You can view other columns or return to Home Page