News Center

Home page

Peak Report

News reports

Huang Ping peak marketing staff manufacturing department learning work experience

Release time:

2022-04-06

Editor's Note: In order to strengthen the marketing staff's mastery of relevant business skills such as cement production enterprise process, cement theoretical knowledge, enterprise quality control, cement quality inspection process operation, etc., at the beginning of the New Year, Huang Ping Jianfeng Cement Company arranged marketing staff to practice in production positions in batches and stages to understand the cement production process. At present, some salesmen have completed the internship of the manufacturing department and summarized their internship work. This paper excerpts a part for everyone to share and learn.

Through 15 days of internship in different positions in the cement production line, I have a further understanding of the cement production process. At the same time, but also clearly aware of their lack of knowledge of cement.

to the manufacturing department on-site work and study, the first thing is safety education and training, which requires our employees to firmly establish the idea of safety first in their daily work, correctly handle the relationship between safety and production, and ensure the safe production of enterprises. In these 15 days, the place I stayed most was the kiln system, followed by the raw material system. We have to continuously inspect the entire production line every day to eliminate potential safety hazards in time. Wear masks and earplugs in places with a lot of dust and noise to reduce the impact of dust and noise on health. Every time the patrol inspection finds that there is a problem with the equipment or cleans up the smoke room and coal pipes, it is necessary to contact the central control through the interphone in the first place, and the central control can only start the operation after shutting down the equipment.

What I have to do every day in the kiln system is to check the flap valves in each layer of the preheater to prevent material accumulation, and then assist colleagues to clean up the clinker particles leaked from the smoke room, the coal pipe at the kiln head and the kiln head. During the operation, although I was assisting on the side, my colleagues still asked me to obey their instructions, wear a complete set of fire-proof clothing, and do a good job of safety protection to prevent safety accidents.

When studying the raw material system, my colleague introduced me to a small skill, which is to judge whether the raw material is qualified or not by the temperature of the V powder selector. Because the high and low temperature represents the high and low of the integrated moisture of the grinding material, the two are inversely proportional to the relationship. It can also be found that the chemical composition and content of the material will directly affect the kiln calcination operation and yield.

clinker is a hydraulic cementitious substance containing calcium oxide, silica, alumina and iron oxide, which is ground into fine powder and fired into partial melting state according to appropriate proportion, and calcium silicate is taken as the main mineral component. The mineral composition of clinker mainly includes tricalcium silicate, dicalcium silicate, tricalcium aluminate and tetralcium aluminate. The mineral with the largest content is tricalcium silicate, followed by dicalcium silicate. Cement clinker in the kiln system formation process, according to the temperature and reaction can be roughly divided into drying, preheating, firing and cooling. The six-stage preheater used by Huangping Peak can make better use of the waste heat of the waste gas discharged from the kiln and the decomposition furnace to heat the raw material, and the gas-solid dispersion is uniform, the heat exchange is rapid and the high energy separation is high, which improves the heat exchange efficiency between the gas and solid to a greater extent, and realizes the superiority, high yield and low consumption of the whole calcination system. The raw material enters the preheater from the raw material warehouse for preheating and decomposition, and then enters the kiln for calcination. After calcination, the clinker enters the fourth-generation grate cooler. Grate cooler is mainly to reduce the clinker temperature, and the role of the heat contained in the clinker for multiple use, while the heat in the form of secondary air, tertiary air return to the kiln, preheater and waste heat power generation system. Finally, the qualified clinker is transported to the clinker warehouse through the clinker inclined zipper.

After a short follow-up study, I not only buried the "seed " for safe production, but also got a preliminary understanding of the role of common raw materials in the cement production process. Only by laying a good foundation and communicating in the same industry, can we not get stage fright because we do not understand the use of equipment and the role of various raw materials, and have more communication with customers in the front line of the market. If I want to do a good job in cement business, I also need to be more proficient in cement knowledge and marketing knowledge, and dare to innovate, constantly improve my business skills, and be a qualified salesman. (Chen Jianfei)

At the production site, the most is the production equipment, and the most important thing to pay attention to is the mechanical injury. Before the equipment is turned on, the central control room will definitely notify the on-site inspection personnel to carry out detailed inspection on the site to confirm that no one can turn on the mechanical parts and belt conveyor on the site. There are large pieces of material and other abnormal conditions on site, which need to be dredged manually. The first thing to do is to notify the central control room to stop the equipment to prevent problems before they occur. When working, we should wear masks, protective clothing and earplugs for noisy equipment. When cleaning up the smoke room, there must be two or more people present, wearing fire-proof clothing, fire-proof caps and fire-proof covers, and there will be other on-site personnel to assist to ensure the safety of the operators.

During the two months of studying in the manufacturing department, I have a more comprehensive understanding of limestone mining, raw material crushing and pre-homogenization, raw material grinding, raw material homogenization, clinker calcination and cooling, cement powder, cement storage and homogenization, cement shipping and other processes. The site of the manufacturing department is roughly divided into five systems: raw meal, kiln, coal mill, cement mill and waste heat power generation. In addition to waste heat power generation, I have studied the inspection post of each system for a week, and have a better understanding of the production process and equipment of each system, as well as the matters needing attention in the usual inspection.

The two-month period is very short. Although it is a bit hard, in general, the harvest is far greater than the effort, and it also makes me realize many simple and simple truths. Every department and every post is indispensable, and no one can be careless, otherwise it will affect the work of the entire production line and the quality of the products. It also made me understand that only when production and sales cooperate with each other can enterprises produce and operate better. The study in the manufacturing department not only gave me a better understanding of the cement production process and cement professional knowledge, but also made me understand that in my new position, I must ask and learn more. Only by working with curiosity can I learn more knowledge. After that, I will continue to strengthen my study of cement production process and professional knowledge. Although I am a marketing position, it is difficult for me to establish a foothold in this industry without a solid foundation and a studious attitude.

(Yang Wentao)

The most important thing in the production workshop is to protect my own safety, so on the first day I entered the workshop to study, I first conducted level 3 safety education, training and examination. After entering the site, I started from the most basic job position, that is, the feeding position, which is mainly responsible for the normal feeding of raw materials and the inspection and dredging of clay belts and iron slag feeding ports. Most of my time is spent in clay feeding ports, iron powder weighing, clay belt heads and other places where materials are easy to accumulate. For me, who has never worked night shift, working all night has become the first big test. Every time after 2 in the morning, my eyes begin to strike. Neither drinking coffee nor washing my face can wake up my body. I remember one time when I was preparing to rest after cleaning the clay blanking port, I received a notice that the sandstone crusher was full of rubble. so at 2: 50 in the early morning, we started the cleaning work. because the construction space was relatively narrow, the dust all over the sky accompanied me for 2 hours of cleaning work, which was deeply imprinted in my memory. I was tired, hungry and sleepy, you can fall asleep almost anywhere.

In the first week of studying in the manufacturing department, I mainly experienced the work of the feeding post and learned the raw materials of the stacking shed. In the second week, I moved to the inspection post of the raw material system, mainly inspecting the normal operation of all equipment in the raw material system. When I followed the post worker to inspect together, he introduced the equipment and their operation principle to me in detail. In the third week, I went to the kiln system, which is the most critical part of cement production, and cleaned the crust in the smoke chamber and the accumulated material in the coal injection pipe at fixed points every day. In order to prevent injuries, protective measures need to be taken during work. After wearing fire-proof clothing and fire-proof cap, you can carry out high-pressure water gun skinning with the post worker. The daily inspection work is running in the preheater, which is as high as ,120 meters. Each floor swings the flap valve to prevent the flap valve from being stuck. At that time, I was also punished for not reporting to my superiors because the flap valve on the fourth floor was stuck. The fourth week is the last step into the cement production process - cement mill system study.

Through nearly two months of study in the manufacturing department, I have a better understanding of cement-related knowledge, but this is far from enough. If I want to be a qualified marketing personnel, I still need to enrich myself through continuous learning.

(Liu Chen Qian)

More information

The company requires each business segment to formulate medium-and long-term business plans.

According to our newspaper, "if an enterprise wants to develop in the long run, first of all, managers should have a long-term vision." On July 24, when general manager Yu Jianhong deployed the work for the second half of the year at the semi-annual meeting of the group company, he specifically asked all enterprises to formulate specific medium-and long-term business development plans for the next three to five years according to the industrial development trend and the group development strategy. Before making arrangements for the specific key work in the second half of the year, Yu Jianhong emphatically put forward the requirements for each business sector to formulate a business strategy plan for 2016-2018 according to the industry development trend and the group's development strategy. Yu Jianhong pointed out that the current group company's strategic decision-making and strategic development capabilities and efficiency still need to be improved. The publicity, understanding and implementation of the group's development strategy by various companies are not in place. The lack of medium and long-term business planning in each business sector restricts the business of the company. Development, cultivation of core products and profitability, construction of product brands, improvement of business scale and comprehensive strength. Last year, the group company asked the international trading company to formulate three-year work objectives and sign a three-year economic responsibility system with the company's management team. The actual effect shows that this has made the management team's management ideas clearer and more scientific and rational in terms of target setting, work arrangement and business development. For this reason, the group company put forward the requirements for the formulation of medium and long-term development plans for each business sector at this meeting. According to the industry characteristics of each business segment, market environment and other specific circumstances, the company makes requirements for the key content of the development plan of each business segment. For example, the pharmaceutical sector focuses on sales growth targets for key profitable products, product development and

2020

07-30

Condensing the heart and gathering wisdom to seek common development

Compared with the past, a new content has been added in the half year of this year-on the morning of July 24, according to the different industrial sectors of the company, the participating managers were divided into three groups: pharmaceutical industry, cement industry and other industries for special discussion. The theme of the discussion was clear in the meeting notice a week ago: under the current economic situation and industrial environment, how to maintain the improvement of corporate profitability and how to promote better and faster development of enterprises. Jiang Xiaomeng, chairman of the group, and Yu Jianhong, general manager of the group, made guiding speeches in three groups. After the group discussion, the group leaders made a summary report at the conference. Due to the clear theme of the discussion, the management personnel at the meeting were well prepared, and the sparks of ideas collided from time to time during the discussion. Due to the different industrial characteristics and market environment, the communication content of each group also has different emphasis. For example, the pharmaceutical group is most concerned about adjusting marketing strategies, handling the relationship between price and quantity, strengthening technological innovation to improve production efficiency and product quality, and subdividing professional fields to make characteristic markets, etc.; the cement group is more focused on reducing energy consumption, strengthening internal control and management optimization, improving operation efficiency, and extending to upstream and downstream industries; other industry groups have more urgent requirements for clear corporate positioning, strengthening business integration, innovating marketing models, and controlling business risks. But in the final analysis, no matter which aspect the speech focuses on, it finally falls on one point: business operations are facing huge crises and challenges, and they must undergo transformation and upgrading, seek rapid development, and highlight the siege of market competition. Some participants said that due to the correlation between the company's various industries

2020

07-31

The chairman assigned ten "homework questions" to the managers"

News from our newspaper On the afternoon of July 24, Chairman Jiang Xiaomeng put forward ten "homework questions" such as "clear development strategy and self-positioning" for managers at all levels in his concluding speech at the first half of the business analysis meeting ". Before "assigning homework", Jiang Xiaomeng first put forward three "thinking questions": what kind of company are we? What kind of management and what kind of talent team do we need? What kind of difficulties have our products and industries encountered? He pointed out that the peak is a historical, cross-industry, comprehensive joint-stock industrial company, is the product completely full competition, completely rely on their own business judgment, strategic decision-making to operate the company. Only under the framework of various laws and regulations, can we bring more wealth to employees by creating the largest living space and the best benefits. The characteristics of the enterprise, the characteristics of the industry, the historical evolution of the enterprise, and the competitive pattern of the products all directly affect the management mode of the peak. We need to absorb all kinds of talents and use their wisdom to continuously make the peak go on for a long time and achieve the dream of "100-year peak. At present, among the two main businesses of the company, the cement industry has encountered the first negative growth in 25 years, and the price has fallen to the lowest point in nearly 15 years; the increasingly strict management policies of the pharmaceutical industry have brought more challenges and tests to the enterprise. However, the crisis and opportunity always coexist, enterprises to survive and develop, it must keep pace with the times, constantly change. In view of the various changes in the internal status quo and external environment of the enterprise, Chairman Jiang Xiaomeng put forward ten requirements to the management personnel at all levels of the enterprise: the 1. should clarify the development strategy and the enterprise self

2020

07-31

Jiang Xiaomeng Yunnan Jianfeng Lectures on Party Lessons

In order to implement the requirements of the higher-level party committee secretary to give in-depth party lectures in enterprises, on July 4, Jiang Xiaomeng, secretary of the party committee and chairman of the group company, gave a special lecture on "two studies and one doing" for party members at Yunnan Jianfeng Cement Company. In the lecture, Jiang Xiaomeng started from the background, overall requirements, learning and education content, and main measures of the "two studies and one doing" activities. He hoped that all party members and cadres would understand "awe, gratitude, humility, and decent", and put forward "What should the current enterprise do" and "How should the enterprise go in the future" and other issues. Jiang Xiaomeng analyzed the future development trend of cement and pharmaceutical industries in detail, emphasized the importance of seizing opportunities, and pointed out that with the homogenization of cement industry becoming more and more serious, if we want to take the road of differentiated brand development, the core of competition is to strengthen self management and maximize the cost, so as to improve the competitive advantage. As far as Yunnan Jianfeng is concerned, it is necessary to continuously improve the level of process technology management and increase the hourly output by increasing inspection efforts. Starting from strengthening the control of raw material procurement, the quality and price should be controlled. By strengthening sales management, vigorously develop direct agents, and strive to maximize the profit per ton; By strengthening equipment maintenance, reduce equipment accidents and further reduce the consumption of machine materials; Make good use of people, while constantly tapping talents and cultivating new people, we will gradually control the total number of workers and improve labor productivity. According to the current situation and the company's development strategy, what should the party members of the peak do? Jiang Xiaomeng asked all the party members and cadres of Yunnan peak to play a good vanguard and exemplary role and take the lead in learning new knowledge, new technology and new experience.

2020

07-31

Jiang Xiaomeng Yunnan Jianfeng Lectures on Party Lessons

2020

07-31

Cum Military and Civilian Mayor Visits Jinxi Factory

On July 8, Jinhua Mayor and Military and Civilian, Deputy Mayor Sun Rongyan, Municipal Government Secretary-General Zhou Jianmin and other leaders went to Jinxi Development Zone to investigate and visit Jianfeng Pharmaceutical Jinxi Pharmaceutical Factory. The picture shows the army and the people visiting the production workshop accompanied by Shen Quan, director of the Jinxi factory. (Contributor by Zhang Mingyin)

2020

07-31

< 1...58 59 60 61 > 跳转到页