News Center

Home page

Peak Report

News reports

Huang Ping peak marketing staff manufacturing department learning work experience

Release time:

2022-04-06

Editor's Note: In order to strengthen the marketing staff's mastery of relevant business skills such as cement production enterprise process, cement theoretical knowledge, enterprise quality control, cement quality inspection process operation, etc., at the beginning of the New Year, Huang Ping Jianfeng Cement Company arranged marketing staff to practice in production positions in batches and stages to understand the cement production process. At present, some salesmen have completed the internship of the manufacturing department and summarized their internship work. This paper excerpts a part for everyone to share and learn.

Through 15 days of internship in different positions in the cement production line, I have a further understanding of the cement production process. At the same time, but also clearly aware of their lack of knowledge of cement.

to the manufacturing department on-site work and study, the first thing is safety education and training, which requires our employees to firmly establish the idea of safety first in their daily work, correctly handle the relationship between safety and production, and ensure the safe production of enterprises. In these 15 days, the place I stayed most was the kiln system, followed by the raw material system. We have to continuously inspect the entire production line every day to eliminate potential safety hazards in time. Wear masks and earplugs in places with a lot of dust and noise to reduce the impact of dust and noise on health. Every time the patrol inspection finds that there is a problem with the equipment or cleans up the smoke room and coal pipes, it is necessary to contact the central control through the interphone in the first place, and the central control can only start the operation after shutting down the equipment.

What I have to do every day in the kiln system is to check the flap valves in each layer of the preheater to prevent material accumulation, and then assist colleagues to clean up the clinker particles leaked from the smoke room, the coal pipe at the kiln head and the kiln head. During the operation, although I was assisting on the side, my colleagues still asked me to obey their instructions, wear a complete set of fire-proof clothing, and do a good job of safety protection to prevent safety accidents.

When studying the raw material system, my colleague introduced me to a small skill, which is to judge whether the raw material is qualified or not by the temperature of the V powder selector. Because the high and low temperature represents the high and low of the integrated moisture of the grinding material, the two are inversely proportional to the relationship. It can also be found that the chemical composition and content of the material will directly affect the kiln calcination operation and yield.

clinker is a hydraulic cementitious substance containing calcium oxide, silica, alumina and iron oxide, which is ground into fine powder and fired into partial melting state according to appropriate proportion, and calcium silicate is taken as the main mineral component. The mineral composition of clinker mainly includes tricalcium silicate, dicalcium silicate, tricalcium aluminate and tetralcium aluminate. The mineral with the largest content is tricalcium silicate, followed by dicalcium silicate. Cement clinker in the kiln system formation process, according to the temperature and reaction can be roughly divided into drying, preheating, firing and cooling. The six-stage preheater used by Huangping Peak can make better use of the waste heat of the waste gas discharged from the kiln and the decomposition furnace to heat the raw material, and the gas-solid dispersion is uniform, the heat exchange is rapid and the high energy separation is high, which improves the heat exchange efficiency between the gas and solid to a greater extent, and realizes the superiority, high yield and low consumption of the whole calcination system. The raw material enters the preheater from the raw material warehouse for preheating and decomposition, and then enters the kiln for calcination. After calcination, the clinker enters the fourth-generation grate cooler. Grate cooler is mainly to reduce the clinker temperature, and the role of the heat contained in the clinker for multiple use, while the heat in the form of secondary air, tertiary air return to the kiln, preheater and waste heat power generation system. Finally, the qualified clinker is transported to the clinker warehouse through the clinker inclined zipper.

After a short follow-up study, I not only buried the "seed " for safe production, but also got a preliminary understanding of the role of common raw materials in the cement production process. Only by laying a good foundation and communicating in the same industry, can we not get stage fright because we do not understand the use of equipment and the role of various raw materials, and have more communication with customers in the front line of the market. If I want to do a good job in cement business, I also need to be more proficient in cement knowledge and marketing knowledge, and dare to innovate, constantly improve my business skills, and be a qualified salesman. (Chen Jianfei)

At the production site, the most is the production equipment, and the most important thing to pay attention to is the mechanical injury. Before the equipment is turned on, the central control room will definitely notify the on-site inspection personnel to carry out detailed inspection on the site to confirm that no one can turn on the mechanical parts and belt conveyor on the site. There are large pieces of material and other abnormal conditions on site, which need to be dredged manually. The first thing to do is to notify the central control room to stop the equipment to prevent problems before they occur. When working, we should wear masks, protective clothing and earplugs for noisy equipment. When cleaning up the smoke room, there must be two or more people present, wearing fire-proof clothing, fire-proof caps and fire-proof covers, and there will be other on-site personnel to assist to ensure the safety of the operators.

During the two months of studying in the manufacturing department, I have a more comprehensive understanding of limestone mining, raw material crushing and pre-homogenization, raw material grinding, raw material homogenization, clinker calcination and cooling, cement powder, cement storage and homogenization, cement shipping and other processes. The site of the manufacturing department is roughly divided into five systems: raw meal, kiln, coal mill, cement mill and waste heat power generation. In addition to waste heat power generation, I have studied the inspection post of each system for a week, and have a better understanding of the production process and equipment of each system, as well as the matters needing attention in the usual inspection.

The two-month period is very short. Although it is a bit hard, in general, the harvest is far greater than the effort, and it also makes me realize many simple and simple truths. Every department and every post is indispensable, and no one can be careless, otherwise it will affect the work of the entire production line and the quality of the products. It also made me understand that only when production and sales cooperate with each other can enterprises produce and operate better. The study in the manufacturing department not only gave me a better understanding of the cement production process and cement professional knowledge, but also made me understand that in my new position, I must ask and learn more. Only by working with curiosity can I learn more knowledge. After that, I will continue to strengthen my study of cement production process and professional knowledge. Although I am a marketing position, it is difficult for me to establish a foothold in this industry without a solid foundation and a studious attitude.

(Yang Wentao)

The most important thing in the production workshop is to protect my own safety, so on the first day I entered the workshop to study, I first conducted level 3 safety education, training and examination. After entering the site, I started from the most basic job position, that is, the feeding position, which is mainly responsible for the normal feeding of raw materials and the inspection and dredging of clay belts and iron slag feeding ports. Most of my time is spent in clay feeding ports, iron powder weighing, clay belt heads and other places where materials are easy to accumulate. For me, who has never worked night shift, working all night has become the first big test. Every time after 2 in the morning, my eyes begin to strike. Neither drinking coffee nor washing my face can wake up my body. I remember one time when I was preparing to rest after cleaning the clay blanking port, I received a notice that the sandstone crusher was full of rubble. so at 2: 50 in the early morning, we started the cleaning work. because the construction space was relatively narrow, the dust all over the sky accompanied me for 2 hours of cleaning work, which was deeply imprinted in my memory. I was tired, hungry and sleepy, you can fall asleep almost anywhere.

In the first week of studying in the manufacturing department, I mainly experienced the work of the feeding post and learned the raw materials of the stacking shed. In the second week, I moved to the inspection post of the raw material system, mainly inspecting the normal operation of all equipment in the raw material system. When I followed the post worker to inspect together, he introduced the equipment and their operation principle to me in detail. In the third week, I went to the kiln system, which is the most critical part of cement production, and cleaned the crust in the smoke chamber and the accumulated material in the coal injection pipe at fixed points every day. In order to prevent injuries, protective measures need to be taken during work. After wearing fire-proof clothing and fire-proof cap, you can carry out high-pressure water gun skinning with the post worker. The daily inspection work is running in the preheater, which is as high as ,120 meters. Each floor swings the flap valve to prevent the flap valve from being stuck. At that time, I was also punished for not reporting to my superiors because the flap valve on the fourth floor was stuck. The fourth week is the last step into the cement production process - cement mill system study.

Through nearly two months of study in the manufacturing department, I have a better understanding of cement-related knowledge, but this is far from enough. If I want to be a qualified marketing personnel, I still need to enrich myself through continuous learning.

(Liu Chen Qian)

More information

Jiang Xiaomeng Yunnan Jianfeng Lectures on Party Lessons

In order to implement the requirements of the higher-level party committee secretary to give in-depth party lectures in enterprises, on July 4, Jiang Xiaomeng, secretary of the party committee and chairman of the group company, gave a special lecture on "two studies and one doing" for party members at Yunnan Jianfeng Cement Company. In the lecture, Jiang Xiaomeng started from the background, overall requirements, learning and education content, and main measures of the "two studies and one doing" activities. He hoped that all party members and cadres would understand "awe, gratitude, humility, and decent", and put forward "What should the current enterprise do" and "How should the enterprise go in the future" and other issues. Jiang Xiaomeng analyzed the future development trend of cement and pharmaceutical industries in detail, emphasized the importance of seizing opportunities, and pointed out that with the homogenization of cement industry becoming more and more serious, if we want to take the road of differentiated brand development, the core of competition is to strengthen self management and maximize the cost, so as to improve the competitive advantage. As far as Yunnan Jianfeng is concerned, it is necessary to continuously improve the level of process technology management and increase the hourly output by increasing inspection efforts. Starting from strengthening the control of raw material procurement, the quality and price should be controlled. By strengthening sales management, vigorously develop direct agents, and strive to maximize the profit per ton; By strengthening equipment maintenance, reduce equipment accidents and further reduce the consumption of machine materials; Make good use of people, while constantly tapping talents and cultivating new people, we will gradually control the total number of workers and improve labor productivity. According to the current situation and the company's development strategy, what should the party members of the peak do? Jiang Xiaomeng asked all the party members and cadres of Yunnan peak to play a good vanguard and exemplary role and take the lead in learning new knowledge, new technology and new experience.

2020

07-30

Yunnan Peak Starts Secondary Security Standardization Creation

On June 19, Yunnan Jianfeng cement company held a mobilization meeting to further implement the requirements of the State Council, Yunnan Province, Pu'er City and Simao District Safety Supervision Bureau on carrying out safety production standardization work, and deploy the secondary safety standardization work. At the meeting, Liu Shenghua, deputy general manager of Yunnan Jianfeng, read out the requirements and work arrangements for creating a secondary enterprise for safety production standardization. The representative of Yunnan superstar Safety Technology Service Co., Ltd., the evaluation unit of safety production standardization, explained in detail the relevant knowledge of safety production standardization consultation and evaluation for the participants, and explained the requirements, standards and other elements of safety production standardization work. Zhou Jiping, general manager of Yunnan Jianfeng, mobilized the establishment of secondary safety production standardization at the meeting, requiring all workshops and departments to prepare and report the data before the end of October, and both software and hardware meet the acceptance conditions, so as to complete the bid creation work by the end of the year. Through the mobilization meeting, the responsible persons of Yunnan Jianfeng and superstar companies and relevant personnel had in-depth exchanges, further unified their thinking, and improved Yunnan Jianfeng employees' understanding of safety production standardization. Everyone recognizes that carrying out safety production standardization work is not only to implement the spirit of a series of documents of the party and the country, but also a mandatory requirement of the government for enterprises, and it is also the need for the sustainable and healthy development of enterprises themselves. Through the development of safety production standardization, enterprises can be promoted to establish and improve the safety production responsibility system, improve the safety production management system, standardize the production operation behavior, investigate and control the hidden dangers of accidents, effectively control the sources of danger, make the production equipment and facilities meet the safety standards, and continuously improve

2020

07-31

Yunnan Peak Starts Secondary Security Standardization Creation

2020

07-31

Yunnan Peak Starts Secondary Security Standardization Creation

2020

07-30

The Company shall organize special operation safety management training

What kind of management process is needed for the special operation permit? How to manage the ticket of the special operation permit? What are the contents of the eight kinds of special operations?... On June 17, the safety committee of the group company organized a special lecture on safety production to conduct systematic and comprehensive training on the safety management knowledge of special operations. The trainer invited for this training is Ge Zhengliang, head of EHS (Environmental Environment, Health Health, Safety) of Zhejiang Prodbang Pharmaceutical Co., Ltd. He has many years of experience in enterprise safety production management and is also a well-known safety management expert in Jinhua region. He has participated in the enterprise safety and environmental protection inspection organized by Jinhua Safety Supervision Bureau for many times and has a certain understanding of the situation of major enterprises in the peak. In this lecture, Ge Zhengliang divided into four parts: division of special operation license scope, special operation license management process, special operation license ticket management, and eight major types of special operation contents. Combined with relevant laws and regulations and his own practical experience in safety production management, Ge Zhengliang explained in simple terms eight special operation situations such as hot work, hoisting, high place, temporary power consumption, open circuit, blind plate plugging, restricted space, etc, standardize the licensed business division, approval department, the places to be paid attention to in the approval management of each type of operation, the responsibilities of the relevant approval department, the matters needing attention in on-site operation, the approval process, ticket management and other knowledge, and make a detailed description of the relevant special operation contents according to the working characteristics of peak subordinate enterprises. In addition, he also shared the experience of special operation safety management of Plo Pharmaceutical.

2020

07-31

Yunnan Jianfeng won the honor of "key leading enterprise in Pu'er City"

Recently, Yunnan Jianfeng Cement Company was awarded the honorary title of "2016 Pu'er Key Leading Enterprise" by the Pu'er Municipal Party Committee and Municipal Government. In recent years, according to the requirements of the group company's "three reductions and three improvements", Yunnan Jianfeng has focused on internal management and external market expansion, tried every means to reduce costs in production, timely controlled market trends in sales, and constantly refreshed various business indicators. While striving to create its own brand value, Yunnan Jianfeng always regards giving back to the society and serving local development as its own responsibility and obligation. Since the establishment of the company, Yunnan Jianfeng has actively responded to the government's call to support the construction of poor border areas and provide free cement to some poor people. Support the education construction in border areas and donate funds for students in need. At the same time, it has paid various taxes and fees on time in accordance with the law and has become a major profit and tax producer in Pu'er City for years. It has gradually grown from a new cement enterprise in Pu'er area to a leading enterprise in the cement industry. The honor of "key leading enterprises in Pu'er City in 2016" is the affirmation and recognition of Yunnan Jianfeng's work over the past few years by the local government and society. During the "Thirteenth Five-Year Plan" period, southwestern Yunnan is about to usher in an explosive stage of development. The construction of international railway projects, the construction of border expressway projects, the construction of airport projects and the construction of people's livelihood projects will all start this year. The acquisition of the honorary title of "Key Leading Enterprise in Pu'er City in 2016" will also provide strong support for Yunnan Jianfeng to strive for the right to supply these projects. (Li Yun)

2020

07-31

< 1...58 59 60 61 > 跳转到页