See effect for rectification
Release time:
2022-03-22
During the overhaul in February , Yunnan Jianfeng Cement Company rectified the equipment and dust collection ducts in some locations. One week after the resumption of production, these rectification effects appeared.
is located at the top of the clinker warehouse. Due to the gentle angle of some air ducts, it is easy to accumulate materials and cause blockage and poor ventilation, resulting in poor dust collection effect. This time, the original dust collection air duct was rearranged to reduce the dust collection point on the same dust collector. A SPC filter cartridge bag dust collector was added to the guide trough of the feed inlet of the flat zipper machine. At present, no matter which operation mode, dust can hardly be seen by naked eyes, thus effectively improving the environmental sanitation of the top of the clinker warehouse. Sealing measures are taken around the limestone crusher. A cover plate is made from the hopper to the ash cover of the crusher to seal. The dust inlet pipe is modified to a smooth angle to reduce resistance. The seal around the head of the belt conveyor and the curtain blocking treatment are added. The skin blocking is pressed. All gaps in the cover plate of the guide chute are sealed with glue and pressed iron. During the operation, the dust entering the pit is several times less than the original, even the dust collector operating current is reduced by 4-5 amps. Rectify the dust collection pipes at the tail of the raw coal storage belt conveyor and the raw coal bunker, remove and rearrange the original smooth and unsmooth pipes, appropriately increase the diameter of the pipes, make the pipe layout points reasonable and smooth, add regulating valves, and reasonably control the air consumption of multiple dust collection points to achieve the expected effect. Magnetic levitation blower is used at the bottom of the raw meal warehouse. The original Roots blower of 2 22 kW is used for the small raw meal warehouse and the large warehouse inflatable box. The operating current has been kept at 47 A. At present, the current of magnetic levitation blower used can fully meet the production demand at about 20 A. The intelligent control system of dry oil lubrication of roller press is put into use, and the overflow of grease is obviously reduced, which eliminates the phenomenon that waste oil needs to be cleaned every day and affects environmental hygiene. After a period of time, the effect will be more obvious by accurately controlling and adjusting the oil supply. The kiln head seal adopts a positive pressure airtight protection sealing device, and almost no air leakage point and flying sand can be found, which effectively eliminates the phenomenon of air leakage in the past, improves the environment and reduces heat loss.
In this overhaul process, these rectifications or technical improvements have achieved good results. (Lou Xuxin)
More information
Tianjin Flemish Company Donates Anti-epidemic Materials
On the morning of July 13, Tianjin Jianfeng Flanders Pharmaceutical Technology Development Co., Ltd. donated materials to the Tianjin Development Zone Charity Association to help the development zone community fight the epidemic.
2020
08-05
In late July, leaders of the group company Jiang Xiaomeng, Yu Jianhong, Chen Tianci and Qin Xuping visited subordinate enterprises separately and sent heatstroke prevention and cooling supplies to employees working under high temperature, urging everyone to pay attention to heatstroke prevention and cooling and safe production work to ensure good physical condition.
2020
08-05
On July 17 and 18, the Group's work analysis meeting for the first half of 2020 was held at the Peak Building of the Group's headquarters to summarize and review the work in the first half of the year and make arrangements for the work in the second half of the year.
2020
08-05
The company requires to do a good job in summer safety production
The high temperature season is approaching, and the group company issued a notice a few days ago to make arrangements for safe production in summer.
2020
08-05
The company requires to do a good job in summer safety production
The high temperature season is approaching, and the group company issued a notice a few days ago to make arrangements for safe production in summer. The notice requires all subordinate units of the company to attach great importance to the work of production safety in summer, and all production and business units should hold a special meeting on production safety in summer. According to the characteristics of production in summer, they should focus on safety risk analysis for mines, outdoor operations and high-temperature posts, and implement control measures to avoid the occurrence of safety accidents such as scalding, heatstroke and electric shock. In order to further strengthen the safety production management in the high temperature season, the notice requires the main person in charge of each production and business unit to lead a team to conduct a comprehensive inspection of the production and business premises according to the characteristics of summer production; strengthen the daily safety production inspection of key posts and special posts; timely rectify the found unsafe behaviors and hidden dangers; Strengthen the management of the storage and use of flammable, explosive, dangerous chemicals and drugs; cooling measures shall be taken for the space exceeding the storage temperature limit of articles. If it is found that the electrical equipment circuit and exhaust fan circuit are aged and damaged, replace them in time and keep the grounding wire in good condition. Do a good job in checking the fire pool, pipeline water pressure and fire extinguishing equipment to ensure that the fire fighting facilities are sensitive, intact and reliable. The high temperature in summer is also a period of frequent occurrence of heatstroke and other diseases. The notice requires all units to do a good job in heatstroke prevention and cooling, implement various relevant measures, and equip necessary cooling facilities or materials such as fans, air conditioners, ice cubes and other cooling facilities or materials according to the conditions of the production site; do a good job in the distribution of heatstroke prevention drugs, supplies and cool drinks in workshops, warehouses, construction sites and other production lines; strengthen canteen management to prevent food poisoning. (this newspaper reporter)
2020
07-22
The company requires to do a good job in summer safety production
The high temperature season is approaching, and the group company issued a notice a few days ago to make arrangements for safe production in summer. The notice requires all subordinate units of the company to attach great importance to the work of production safety in summer, and all production and business units should hold a special meeting on production safety in summer. According to the characteristics of production in summer, they should focus on safety risk analysis for mines, outdoor operations and high-temperature posts, and implement control measures to avoid the occurrence of safety accidents such as scalding, heatstroke and electric shock. In order to further strengthen the safety production management in the high temperature season, the notice requires the main person in charge of each production and business unit to lead a team to conduct a comprehensive inspection of the production and business premises according to the characteristics of summer production; strengthen the daily safety production inspection of key posts and special posts; timely rectify the found unsafe behaviors and hidden dangers; Strengthen the management of the storage and use of flammable, explosive, dangerous chemicals and drugs; cooling measures shall be taken for the space exceeding the storage temperature limit of articles. If it is found that the electrical equipment circuit and exhaust fan circuit are aged and damaged, replace them in time and keep the grounding wire in good condition. Do a good job in checking the fire pool, pipeline water pressure and fire extinguishing equipment to ensure that the fire fighting facilities are sensitive, intact and reliable. The high temperature in summer is also a period of frequent occurrence of heatstroke and other diseases. The notice requires all units to do a good job in heatstroke prevention and cooling, implement various relevant measures, and equip necessary cooling facilities or materials such as fans, air conditioners, ice cubes and other cooling facilities or materials according to the conditions of the production site; do a good job in the distribution of heatstroke prevention drugs, supplies and cool drinks in workshops, warehouses, construction sites and other production lines; strengthen canteen management to prevent food poisoning. (this newspaper reporter)
2020
07-31