News Center

Home page

Peak Report

News reports

See effect for rectification

Release time:

2022-03-22

During the overhaul in February , Yunnan Jianfeng Cement Company rectified the equipment and dust collection ducts in some locations. One week after the resumption of production, these rectification effects appeared.

is located at the top of the clinker warehouse. Due to the gentle angle of some air ducts, it is easy to accumulate materials and cause blockage and poor ventilation, resulting in poor dust collection effect. This time, the original dust collection air duct was rearranged to reduce the dust collection point on the same dust collector. A SPC filter cartridge bag dust collector was added to the guide trough of the feed inlet of the flat zipper machine. At present, no matter which operation mode, dust can hardly be seen by naked eyes, thus effectively improving the environmental sanitation of the top of the clinker warehouse. Sealing measures are taken around the limestone crusher. A cover plate is made from the hopper to the ash cover of the crusher to seal. The dust inlet pipe is modified to a smooth angle to reduce resistance. The seal around the head of the belt conveyor and the curtain blocking treatment are added. The skin blocking is pressed. All gaps in the cover plate of the guide chute are sealed with glue and pressed iron. During the operation, the dust entering the pit is several times less than the original, even the dust collector operating current is reduced by 4-5 amps. Rectify the dust collection pipes at the tail of the raw coal storage belt conveyor and the raw coal bunker, remove and rearrange the original smooth and unsmooth pipes, appropriately increase the diameter of the pipes, make the pipe layout points reasonable and smooth, add regulating valves, and reasonably control the air consumption of multiple dust collection points to achieve the expected effect. Magnetic levitation blower is used at the bottom of the raw meal warehouse. The original Roots blower of 2 22 kW is used for the small raw meal warehouse and the large warehouse inflatable box. The operating current has been kept at 47 A. At present, the current of magnetic levitation blower used can fully meet the production demand at about 20 A. The intelligent control system of dry oil lubrication of roller press is put into use, and the overflow of grease is obviously reduced, which eliminates the phenomenon that waste oil needs to be cleaned every day and affects environmental hygiene. After a period of time, the effect will be more obvious by accurately controlling and adjusting the oil supply. The kiln head seal adopts a positive pressure airtight protection sealing device, and almost no air leakage point and flying sand can be found, which effectively eliminates the phenomenon of air leakage in the past, improves the environment and reduces heat loss.

In this overhaul process, these rectifications or technical improvements have achieved good results. (Lou Xuxin)

More information

Peak natural products among the top 20 scientific and technological innovation in TEDA

A few days ago, Tianjin Jianfeng Natural products Research and Development Co., Ltd. stood out among nearly 35000 enterprises in Tianjin Development Zone and won the honor of "Top 20 Scientific and technological Innovation Enterprises of 2015. The selection criteria for the top 20 scientific and technological innovation enterprises in Tianjin Economic and Technological Development Zone mainly include: they have won science and technology awards or patent awards in 2015, as well as other awards above the provincial level; they have obtained the qualification certification or approval of research and development institutions above the provincial level; in 2015, the number of invention and utility model patent applications and authorizations was large, totaling more than 15; in 2015, they were supported by national or Tianjin key science and technology plans; scientific research achievements have made significant progress and technology. According to the above standards, Jianfeng Natural Products Company has not only won the second prize of Tianjin Science and Technology Innovation Project Award for the achievements of "Tianjin Plant Waste Reutilization Technology Engineering Center Construction", but also completed the process research of grape seed extract and ginsenoside to pesticide residues, and formulated the international business standard of grape seed extract (grape seed oligomeric proanthocyanidins). In order to better carry out the pilot experiment, large-scale technical transformation was carried out on the second workshop, and the process optimization of extracting anthocyanins from blueberries has been carried out. At the same time, the main business income, operating profit, tax revenue and other economic indicators of peak natural products company in 2015 have increased significantly year-on-year. Relying on the advantages of excellent quality, good efficiency, great contribution, safety and environmental protection, and good social responsibility, Jianfeng Natural Products Company successfully passed the review and became one of the "Top 20 Scientific and Technological Innovation Enterprises in 2015" in Tianjin Development Zone. (

2020

07-31

Peak natural products among the top 20 scientific and technological innovation in TEDA

2020

07-30

Peak pharmaceutical "enterprise information construction project" through the acceptance

The "Enterprise Informatization Construction Project" of Jianfeng Pharmaceutical Company was included in the list of key projects of "Integration of Industrialization and Industrialization" (high-level and in-depth combination of informatization and industrialization) in Jinhua City in 2015, and successfully passed the on-site acceptance of the expert group on the morning of May 18. The main contents of the "enterprise information construction project" of the pharmaceutical company include: the tank farm control system, which solves the problem of closed metering and transportation of organic solvents between the tank farm and the production area, can automatically realize the terminal metering setting, and effectively ensure the safety and environmental protection requirements of the tank farm operation; The air conditioning automatic control system realizes the control of the temperature, humidity and room pressure difference in the air conditioning area through the PLC digital-to-analog conversion of the upper computer and lower computer and the terminal actuator regulator, ensure the cleanliness requirements of the production area environment; The online particle monitoring software system automatically adjusts to the standard flow through the upper computer, vacuum system, laser sensor and isodynamic sampling probe, etc. through the flow detector device and key orifice plate inside each sensor, monitors the temperature, humidity, particles, planktonian bacteria, room pressure difference, etc., implements dynamic management, and realizes visual monitoring of the production process environment. MRP production management system, it makes it easier for the warehouse, workshop, and management personnel to obtain information about the flow of materials in the production process, the implementation of production plans, and product inventory. During the on-site acceptance on the 18th, the acceptance team composed of the Information Department of the Municipal Economic and Information Commission, the Economic and Development Bureau of the Development Zone, the Municipal Information Promotion Association and professors of Zhejiang Normal University checked the contracts of each system software, purchase and transfer records, training records, and problem records in project implementation,

2020

07-31

Peak natural products among the top 20 scientific and technological innovation in TEDA

2020

07-31

< 1...58 59 60 61 > 跳转到页