See effect for rectification
Release time:
2022-03-22
During the overhaul in February , Yunnan Jianfeng Cement Company rectified the equipment and dust collection ducts in some locations. One week after the resumption of production, these rectification effects appeared.
is located at the top of the clinker warehouse. Due to the gentle angle of some air ducts, it is easy to accumulate materials and cause blockage and poor ventilation, resulting in poor dust collection effect. This time, the original dust collection air duct was rearranged to reduce the dust collection point on the same dust collector. A SPC filter cartridge bag dust collector was added to the guide trough of the feed inlet of the flat zipper machine. At present, no matter which operation mode, dust can hardly be seen by naked eyes, thus effectively improving the environmental sanitation of the top of the clinker warehouse. Sealing measures are taken around the limestone crusher. A cover plate is made from the hopper to the ash cover of the crusher to seal. The dust inlet pipe is modified to a smooth angle to reduce resistance. The seal around the head of the belt conveyor and the curtain blocking treatment are added. The skin blocking is pressed. All gaps in the cover plate of the guide chute are sealed with glue and pressed iron. During the operation, the dust entering the pit is several times less than the original, even the dust collector operating current is reduced by 4-5 amps. Rectify the dust collection pipes at the tail of the raw coal storage belt conveyor and the raw coal bunker, remove and rearrange the original smooth and unsmooth pipes, appropriately increase the diameter of the pipes, make the pipe layout points reasonable and smooth, add regulating valves, and reasonably control the air consumption of multiple dust collection points to achieve the expected effect. Magnetic levitation blower is used at the bottom of the raw meal warehouse. The original Roots blower of 2 22 kW is used for the small raw meal warehouse and the large warehouse inflatable box. The operating current has been kept at 47 A. At present, the current of magnetic levitation blower used can fully meet the production demand at about 20 A. The intelligent control system of dry oil lubrication of roller press is put into use, and the overflow of grease is obviously reduced, which eliminates the phenomenon that waste oil needs to be cleaned every day and affects environmental hygiene. After a period of time, the effect will be more obvious by accurately controlling and adjusting the oil supply. The kiln head seal adopts a positive pressure airtight protection sealing device, and almost no air leakage point and flying sand can be found, which effectively eliminates the phenomenon of air leakage in the past, improves the environment and reduces heat loss.
In this overhaul process, these rectifications or technical improvements have achieved good results. (Lou Xuxin)
More information
Representatives of the 20th Congress preached the 20th Congress at the peak.
On the afternoon of November 11, a special lecture on the spirit of the Party's 20th Congress was held in the conference room of the Peak Building. Yang Xiayun, a representative of the 20th National Congress, walked into the peak and preached his understanding of the spirit of the 20th National Congress for Party members through personal experience.
2022
11-23
The group party committee organizes and learns the twenty spirits.
On the afternoon of October 28, the party Committee of the group organized all members to hold a special study meeting to earnestly study and understand the communique of the first plenary session of the 20th central Committee of the communist party of China and the revision of the party constitution. Jiang Xiaomeng, Secretary of the Party committee of the group, stressed at the study meeting that the 20th National Congress of the Communist Party of China has drawn a grand blueprint for building a socialist modern country in an all-round way, opened a new chapter in the era of national development, and pointed out the direction for the future development of enterprises. Party organizations at all levels of the group should pay full attention to and earnestly implement it, actively organize party members and cadres to learn the spirit of the spirit of the 20th National Congress, And to guide the future work practice.
2022
11-01
Spike Party Members and Cadres Watch the Opening Meeting of the 20th Congress
At 10 a.m. on October 16, the 20th National Congress of the Communist Party of China was solemnly opened in the Great Hall of the People in Beijing. Xi Jinping delivered a report to the Party's 20th National Congress on behalf of the 19th Central Committee. The group company attaches great importance to and carefully deploys, and organizes all party members and management backbones of the group headquarters and subsidiaries to watch the live broadcast of the opening meeting through the Internet, TV and other methods.
2022
10-23
Jiang Xiaomeng was hired as the "Shuanglong Escort" entrepreneurial mentor.
On September 16, Jiang Xiaomeng, Secretary of the Party committee and chairman of the group company, was employed as the entrepreneurial mentor of "Shuanglong escort" at the launching ceremony of the special action of "Shuanglong escort steady progress and quality improvement" held in Jinhua City and the promotion meeting of innovative products of key talent enterprises in Jinhua City.
2022
09-27
From August 18th to 19th, the 12th Congress of the Zhejiang Federation of Industry and Commerce was held in Hangzhou, and the 12th leadership of the Provincial Federation of Industry and Commerce was elected. Jiang Xiaomeng, Secretary of the Party Committee and Chairman of the Group, was re-elected as Vice President of Zhejiang Chamber of Commerce.
2022
09-01
Contact Us
No. 88 Wujiang East Road, Jinhua City, Zhejiang Province, China
Tel: +86-579-82326868
Fax : +86-579-82324666
©2023 Zhejiang Jianfeng Group Co., Ltd. Powered by: www.300.cn SEO Business License
SAF Coolest v1.2 设置面板 SHJSS-AHDB-FSSQE-ZSW
无数据提示
Sorry, the current column has no content !
You can view other columns or return to Home Page