Thinking outside the box to solve problems
Release time:
2021-09-22
Yunnan Jianfeng Cement Company's kiln tail coal powder said that no matter bituminous coal or lignite is used, coal breakage will occur. This problem has been perplexing production. For many years, it has spent a lot of energy and also affected the stable calcination of rotary kiln and the output and quality of clinker. During the period of
, relevant personnel of Yunnan peak often communicated and discussed with external technicians and personnel of peer users. Some opinions mentioned the position from pulverized coal bin to mixing bin. It originally had a blanking pipe composed of a soft expansion joint, an eccentric blanking pipe, a cone reducing diameter joint and a fixed joint at the entrance of the small bin, and the change from the inner diameter of the gate valve of the pulverized coal silo 600mm to the inner diameter of the small silo entrance 385mm results in poor blanking. After on-site measurement, Yunnan Peak decided to install a soft expansion joint with an inner diameter of 600mm from the lower part of the gate valve of the pulverized coal silo. The lower part of the expansion joint was also changed to a stainless steel round pipe with an inner diameter of 600mm , which was directly open and welded with the top of the silo to form a discharge pipe. After the transformation is completed, there will be no coal cut-off phenomenon when bituminous coal is used, so lignite is resumed. When lignite is used, instantaneous coal cut-off phenomenon occurs occasionally, but it will not affect the temperature in the decomposition furnace and the calcination working condition of the rotary kiln, and the feeding amount of the rotary kiln can be stabilized at more than 260 tons. The transformation achieved the desired effect.
For a long time, I have felt that imported equipment cannot be easily changed, but after this transformation, I have changed my inherent concept. So, sometimes change thinking, also can harvest full.
(Lou Xuxin)
More information
Publicity of Environmental Protection Acceptance for Completion of Kiln End Flue Gas Desulfurization Project of daye peak cement co., ltd. According to the requirements of the Interim Measures for Environmental Protection Acceptance for Completion of Construction Projects (No.4 [2017] of the State Environmental Regulations) issued by the Ministry of Environmental Protection, the environmental protection acceptance information of "Kiln End Flue Gas Desulfurization Project" of daye peak cement co., ltd. is now publicized. Basic Information of 1. Project Project Name: Kiln End Flue Gas Desulfurization Project Construction Unit: daye Jianfeng Cement Co., Ltd. Project Construction Location: Yongguang Village, Baoan Town, daye city, nature of the project in the existing plant area of daye Jianfeng Cement Co., Ltd.: The construction content of the technological transformation project is: This technological transformation project is mainly to build a wet desulfurization system for kiln end gas of the company's existing 4000t cement clinker production line, adopting limestone-gypsum wet flue gas desulfurization process. The project covers a total area of 500 m2, with a new construction area of about 450 m2. It mainly builds desulfurization complex building, flue gas system, SO2 absorption system, limestone powder conveying and limestone slurry preparation system, process water system, gypsum dehydration system and supporting pipelines. Power supply, water supply, compressed air and other public works rely on the existing plant. Total investment and environmental protection investment: the total investment of the project is 10.37 million yuan, all of which are environmental protection investment. The project was entrusted to Huangshi Yangtze River Environmental Engineering Design and Research Institute to carry out environmental impact assessment in September 2017. On November 16, 2017, Daye Municipal Environmental Protection Bureau issued a reply with YEHAN [2017] No. 354. Implementation of 2. environmental protection measures The scope of this acceptance is the flue gas desulfurization system and supporting facilities at the end of the kiln. (1) Exhaust gas pollution
2020
07-31
Spike New Drug Approved for Registration
On April 16, Jianfeng Pharmaceutical Company received the approval and issuance of Olopatadine Hydrochloride Eye Drops "Drug Registration Approval" (approval number: 2019S00296) approved by the State Drug Administration. Olopatadine hydrochloride eye drops is mainly used to treat the signs and symptoms of allergic conjunctivitis. It is a mast cell stabilizer and a relatively selective histamine H1-receptor antagonist. It can inhibit type I immediate allergic reactions in vivo and in vitro experiments. At present, the product has been included in the "National Basic Medical Insurance, Work Injury Insurance and Maternity Insurance Drug Catalog (2017 Edition)" and classified as Class B. According to the relevant data of IMS database, in 2018, the global sales of olopatadine hydrochloride eye drops were about 0.37 billion US dollars, and the sales in China were about 10.232 million US dollars. Spike Pharmaceuticals already has the corresponding production line, this time to obtain the registration approval, marking Spike Pharmaceuticals has the qualification to carry out the production and sales of olopatadine hydrochloride eye drops, will further enrich the product line of Spike Pharmaceuticals, help to enhance the competitiveness of the company's pharmaceutical business. (Xia Yingpin)
2020
07-31
Spike New Drug Approved for Registration
On April 16, Jianfeng Pharmaceutical Company received the approval and issuance of Olopatadine Hydrochloride Eye Drops "Drug Registration Approval" (approval number: 2019S00296) approved by the State Drug Administration. Olopatadine hydrochloride eye drops is mainly used to treat the signs and symptoms of allergic conjunctivitis. It is a mast cell stabilizer and a relatively selective histamine H1-receptor antagonist. It can inhibit type I immediate allergic reactions in vivo and in vitro experiments. At present, the product has been included in the "National Basic Medical Insurance, Work Injury Insurance and Maternity Insurance Drug Catalog (2017 Edition)" and classified as Class B. According to the relevant data of IMS database, in 2018, the global sales of olopatadine hydrochloride eye drops were about 0.37 billion US dollars, and the sales in China were about 10.232 million US dollars. Spike Pharmaceuticals already has the corresponding production line, this time to obtain the registration approval, marking Spike Pharmaceuticals has the qualification to carry out the production and sales of olopatadine hydrochloride eye drops, will further enrich the product line of Spike Pharmaceuticals, help to enhance the competitiveness of the company's pharmaceutical business. (Xia Yingpin)
2020
07-31