The implementation of vaccination, strict control of the accumulation of flow dredging dredging, work health and heavy lying peak calm to deal with the double test of the epidemic situation.
Release time:
2021-08-23
into 8# February, Hubei Province first appeared the inflow of close contacts of the new crown pneumonia, the epidemic prevention and control situation tightened. In the face of the double test that followed, Daye Peak Cement Company organized its employees to take precise measures and actively respond to it, and all the work was in good order.
Internal tight external control epidemic prevention situationDue to the outbreak of new coronary pneumonia in many parts of the country in 7# September, confirmed cases have also been found in individual areas of Hubei Province, the epidemic prevention and control situation is suddenly tight. The Delta strain that triggered a new wave of outbreaks has taken on some new features in its spread, and vaccination is the most economical and effective measure to prevent and control the spread of neo-coronary pneumonia. To this end, Daye Peak in the 8# November 1 issued the new crown epidemic normalization prevention and control requirements, as well as through the pre-shift after-shift meeting, plant publicity column and other means of epidemic prevention and control knowledge publicity, all advocate and encourage employees to actively take the initiative to vaccinate, to eat a "reassurance pill". In the implementation of daily internal epidemic prevention and control measures, Daye Peak formulated and issued three phases of normalized prevention and control requirements for the new crown epidemic on 8 , 1 , 8 and 10 . According to the changes in the epidemic prevention and control situation and the characteristics of enterprise work, relevant knowledge was publicized, less travel and less gathering were advocated, and employees' awareness of epidemic protection was strengthened, guide employees to do a good job in self-protection in work and life; Starting from 10 , employees fill in the epidemic prevention and control information form by scanning WeChat codes every day; The enterprise regularly checks the reserve of emergency materials, understands and grasps the purchasing channels of emergency materials, and is ready to purchase at any time. Daily protective articles such as masks are distributed to every employee in each post on time every day. Washing, protection, killing and killing supplies are also placed at fixed points and replenished at any time. When a new wave of epidemics arrives, the Hubei cement market has entered the peak sales season, the wrong peak shutdown maintenance is also about to begin, procurement, sales, transportation, maintenance personnel flow travel and health management has become the top priority of the current epidemic prevention and control. In order to ensure the orderly development of daily work, Daye Peak immediately conveyed the epidemic prevention and control requirements to suppliers, dealers and drivers in place. Especially for long-distance logistics drivers, it is proposed that drivers and accompanying personnel must check their health codes and travel cards when entering the factory, and try to move less in the cab after entering the factory and wear masks after getting off the bus. For maintenance outsourcing personnel, it is required that "unnecessary do not leave the factory, leaving the factory must be reported, the personnel entering the factory must be audited". In the third phase of epidemic prevention and control requirements issued on
10, the Environmental Security Department also specially produced a special two-dimensional code for testing, which was released to relevant units and individuals in advance. Foreign personnel can scan the code and fill in the visitor registration form, and their personal travel, health, vaccination and other information can be transmitted to the mobile phones of the Environmental Security Department and the guard personnel, so as to know and review in advance, avoid the risk of exposure that may be caused by the concentration of "inspection codes" at the factory gate. As of the time of publication, Daye Peak has completed the vaccination except for
5employees who will receive the second vaccination in the near future. All internal prevention and control measures have been strictly implemented. The "check code" for foreign personnel in advance also ensures the smooth verification process and is well received by relevant units and personnel. Dredging and Draining War Rainstorm
812
, Huangshi City started a Class IV emergency response to meteorological disasters (rainstorm). According to the analysis and prediction of meteorological data, heavy precipitation is expected from 12 to 14 , with accumulated rainfall of 80 ~140 mm, local 200 mm above, accompanied by strong convective weather such as thunderstorms and strong winds. After receiving the notice at noon that day, Daye Peak immediately launched the emergency plan, and all emergency personnel on duty stuck to their posts and strengthened inspections of key parts such as drainage channels to prevent "waterlogging" due to poor drainage ". At about 55 o'clock on the night of , the long-lasting rain suddenly increased, and a large area of stagnant water soon appeared in Daye Peak Factory and continued to rise. In the past, when it rained, only low-lying areas in the factory area would have accumulated water. During this rainstorm, all the sections around the office building and the central control building had accumulated water. The accumulated water in low-lying areas soon exceeded
40cm, and even some sections of drainage ditches 60 to 70cm deep had overflow. The lowest-lying cement mill and coal mill area in the plant area has power rooms and electrical equipment. Once soaked by rain, the consequences will be disastrous. Facing the flood situation, Daye peak duty personnel were divided into two groups. Deputy General Manager Li Jiang and equipment supervisors Huang Yanming and Wang Tao organized cleaning of sundries carried by rainwater and dredging drainage outlets in the kiln system to speed up drainage. Wu Xinqiong, manager of the Environmental Security Department, Liu Haihua and Huang Bide, production supervisors, organized shift personnel in the cement mill area to switch the manual gate for flood discharge outside the No.7 bulk warehouse and open the pump. The rainfall on the night of
was much larger than expected, which affected the normal operation of the equipment. As midnight approached, the production and delivery posts were shut down one after another, and all the people who could be organized worked together to rescue the accident.Due to early warning, personnel organization in place and timely emergency disposal, there is no serious water accumulation in key parts of the factory that affects the safety of equipment. Busy until the morning of
on
13, the rain gradually decreased, the accumulated water gradually receded, and daye peak successfully passed the torrential rain disaster. This heavy rainfall in Daye area lasted for five days in a row. Although there was no heavy rain like 12 , the continuous rainy days still brought adverse effects on the production organization, the factory environment and the health of employees. For this reason, Daye Peak seized the intermittent precipitation, urgently cleaned up the silt and garbage debris brought by the rainstorm, and dredged the drainage facilities. In combination with the prevention and control requirements during the epidemic, Daye Peak asked all departments to remind employees to pay special attention to the safety of commuting, and stressed that they should stay in the dormitory during heavy rain to avoid colds and fevers due to rain. The canteen provides ginger soup every day to help employees dispel cold and dampness. There will also be precipitation weather in Hubei Province in the future. In addition to checking and cleaning the factory area, Daye Peak will also focus on checking the mine slopes and flood drainage ditches to avoid dangerous situations. The off-peak maintenance of the production line was also carried out in an orderly manner, and production was resumed on the afternoon of
20. (Fu Yiwu Wu Xinqiong)
More information
The company's vocational skill level self-identification training began.
After preparing the handout materials and question bank for the previous stage of vocational skill grade identification training, daye peak cement company conducted the vocational skill grade identification training for the machine repair team of the manufacturing department on August 10. On August 12 and 18, the pharmaceutical company also organized two phases of vocational skill level identification training for pharmaceutical preparation workers. According to the national skill level standard, the group company is divided into four grades: grade 5/junior worker, grade 4/intermediate worker, grade 3/senior worker and grade 2/technician. According to the analysis of employee registration, since there is only one type of job for pharmaceutical preparation workers, and cement production workers include cement central controller, cement quality inspector, cement clinker calciner, cement manufacturer, cement production inspection worker and other types of jobs, the number of applicants is less than that of cement production workers. Most of the employees who signed up were identified as participating in the four levels of vocational skills. According to preliminary statistics, there are now 155 employees who have signed up for their professional skill level, including 47 pharmaceutical preparation workers and 108 cement production workers. The human resources department of the group company is stepping up efforts to organize personnel to examine the qualifications of the employees whose registration grades are identified, and then enter the Zhejiang professional ability integration platform for formal registration after passing the examination. According to the national vocational skill standards and other content, each unit carries out targeted training for employees who participate in the independent identification of vocational skill levels. The training is conducted through on-site teaching, online teaching, and learning platform question bank exercises. After the training, the group company will organize the employees who participate in the grade identification to carry out examination and assessment, and those who pass the examination will complete the grade identification and issue the skill grade certificate. It is understood that in order to ensure the quality of vocational skill level identification, after the company was approved to independently identify the vocational skill level, the human resources department of the group organized all units to compile the question bank for various types of work in combination with the actual situation of the enterprise and with reference to the national vocational skill standards and training syllabus and other materials. after classification, unification and standardization, verification and proofreading, the preparation of the question bank has been basically completed. After being submitted to the superior unit for examination and approval, the company will import the question bank on the enterprise university platform to facilitate employees to prepare for the examination. The question bank for the independent identification of vocational skills level will also be extracted from the question banks of various industries, including professional ethics, basic knowledge, safety and environmental protection knowledge, laws and regulations knowledge, professional work practice and other national vocational skills standards. Basic requirements. The examination and assessment for independent determination of vocational skill level is tentatively scheduled for mid-September.
2021
08-23
Hu Guoyun, vice mayor of Pu'er, visited the peak
On July 16, a delegation led by Hu Guoyun, vice mayor of Pu'er City, Yunnan Province, and heads of Pu'er SASAC, Industrial Park Management Committee, Investment Promotion Bureau and other departments visited the headquarters of the group company. In the exchange with Jiang Xiaomeng, Yu Jianhong and other group leaders, Hu Guoyun expressed his gratitude to Jianfeng Group on behalf of the Pu'er Municipal Party Committee and Municipal Government. He said that the investment and entrepreneurship from Jianfeng to Pu'er not only promoted the development of Pu'er's regional industrial economy, but also made outstanding contributions to the local poverty alleviation. The two sides also exchanged and discussed issues such as strengthening in-depth cooperation between the two sides.
2021
07-21
Municipal SASAC Party Committee Visited Jianfeng Old Party Member
On June 28, Huang Zunhui, a second-level researcher of the State-owned Assets Supervision and Administration Commission of Jinhua City, visited Jianfeng Group and made a special trip to visit two retired party members, Chen Bingxiang and Yin Rongfu. Among the two Jianfeng veteran party members, Chen Bingxiang has been engaged in party affairs for nearly 30 years, and Yin Rongfu has won the honor of outstanding party members in Zhejiang Province and is a representative of Jianfeng party workers and party members. On behalf of the party committee of the Municipal State-owned assets Supervision and Administration Commission, Huang Zunhui expressed condolences to the two veteran party members, thanked the older generation of party members for their contributions, and exchanged views with Jiang Xiaomeng, secretary of the party committee and chairman of the group, and Qin Xuping, member of the party committee and chairman of the trade union, and fully affirmed the development of peak in recent years and the improvement of the level of party building work.
2021
07-12
"I'll teach you a lesson." Concluded successfully.
On the afternoon of June 24, as one of the highlights of the company's 2021 safety production month series of activities, the second phase of the "I'll give you a lesson" safety training was held at the group headquarters. the management personnel, production backbones and personnel from all departments and offices of the group gathered at the scene. foreign enterprises took safety "big lessons" through video, which was more effective than the teaching. At this point, the "I'll give you a lesson" safety training has come to a successful conclusion.
2021
07-12
Glory in the Party's 50-year-old Party Member Xi Ling Commemorative Medal
On June 23, the party committee of the group company sent a special person to visit and awarded the commemorative medals of "50 years of Glory in the Party" to six veteran party members. 2021 is the 100 anniversary of the founding of the Communist Party of China. For the first time, the Party Central Committee issued the "50 Years of Glory in the Party" commemorative medal to surviving party members who have reached the 50th anniversary of the party and have always performed well. The Organization Department of the Central Committee also specially issued the "Administrative Measures for the Issuance of Commemorative Medals of" Glory in the Party for 50 Years "", which stipulates the issuance procedures, issuance methods, production, and management of commemorative medals. In the future, the "50 Years of Glory in the Party" commemorative medal will be issued as a regular task and will be issued once every year around July 1.
2021
07-12
What is the exact time of the first Congress of the Communist Party of China? Which "big" representatives boarded the red boat in South Lake? What is the connection between the 1972 Sino-US Joint Communique and Hangzhou? On the morning of June 24th, the Party Committee of the Group Company invited members of the Party History Learning and Education Group of Zhejiang Provincial Party Committee and the vice president of Zhejiang Branch of China News Service to give a special party class of "returning to the scene of party history and reappearing the moment of party history" for the party members and cadres of the Company.
2021
07-01