Yunnan Jianfeng strengthens daily safety management
Release time:
2021-05-06
In order to further supervise and standardize the on-site safety management, Yunnan Jianfeng organized personnel to carry out special inspection of safety tools and appliances in the power room and special inspection of flammable, explosive and pulverized coal preparation systems. The inspection team went to the power rooms of each system to check the daily management contents including the fixed placement of the safety tools and equipment rooms, whether the tools and equipment ledgers are classified and numbered uniformly, the records of entering and leaving the warehouse, and the regular inspection of tools and equipment, etc., and focused on the careful inspection of the most used safety tools and equipment in daily work. During the inspection, the staff conducted a detailed inspection and verification of the wear and tear of safety tools and instruments in each power room under the company's jurisdiction and the date of passing the test to prevent unqualified tools and instruments from flowing into the operation site. For flammable, explosive and pulverized coal preparation system areas, the inspectors are responsible and meticulous, and do not miss any dead corner, and record while checking. After the inspection, the HSE Department will summarize the inspection results and sort them out item by item to provide basis for rectification of each department.
Combined with the construction progress of the raw meal final grinding roller press renovation and the construction arrangement of the power grid line,
4# October12 , the clinker system of Yunnan Jianfeng Cement Company was stopped for overhaul. In order to ensure the safety of maintenance and technical renovation construction, on the afternoon of 4 10 , Yunnan peak organized training on the safety control implementation plan for clinker system equipment, electrical and process maintenance, focusing on the implementation of safety and environmental protection work requirements and relevant measures in this maintenance. the safety and environment department arranged on-site safety control measures and on-site supervision organization actions, the security team explained the maintenance work content and the corresponding safety control implementation plan one by one, so that the employees have a full understanding. At the same time, in view of the recent situation that there are many outsourcing workers for equipment maintenance and renovation, on January 22, 23, Yunnan Peak organized the on-site leaders of outsourcing units to learn safety knowledge. Tan Guojian, deputy general manager of Yunnan Jianfeng, analyzed the reasons for the current safety irregularities, and required the person in charge of on-site construction safety to do a good job of publicity and education, everyone to participate in the work risk assessment, and the management personnel to supervise and manage the assessment in a timely and effective manner. Eliminate the negative attitude of employees who are afraid of trouble and try to save trouble, and require everyone to take small things as big things and attract enough attention to avoid potential safety hazards, ensure that there is no accident on the maintenance and technical renovation site.
The quality of lubricating oil has always been one of the difficulties in equipment management. After long-term use, the color, density, viscosity, water content and mechanical impurity content of the oil will change. If these indicators exceed a certain threshold, the performance will be greatly reduced, which will cause hidden dangers to the safe operation of the equipment. At present, the waste heat power generation system turbine lubricating oil has been used continuously for 7 years. Originally, the basis for judging the replacement of lubricating oil for most equipment in Yunnan Peak was based on experience or the period provided by suppliers. Due to differences in operating conditions and environment, the judgment results often had large deviations, either causing waste if the equipment was replaced earlier, or bringing hidden dangers to the safe operation of the equipment if the equipment was replaced later. In particular, large-scale dilute oil stations have the characteristics of being responsible for more lubrication points and more oil volume, and this contradiction is particularly prominent. To this end, Yunnan Peak specially commissioned a professional third-party testing agency to test the turbine lubricating oil of the waste heat power generation system. This not only provides decision-making basis for equipment management personnel to carry out lubrication management and maintenance, avoid serious lubrication failure and mechanical failure, but also avoids the increase of operating cost caused by premature replacement. (Liu Fengbin
nd Floor Xu XinChen Shiye)
More information
Representatives of the 20th Congress preached the 20th Congress at the peak.
On the afternoon of November 11, a special lecture on the spirit of the Party's 20th Congress was held in the conference room of the Peak Building. Yang Xiayun, a representative of the 20th National Congress, walked into the peak and preached his understanding of the spirit of the 20th National Congress for Party members through personal experience.
2022
11-23
The group party committee organizes and learns the twenty spirits.
On the afternoon of October 28, the party Committee of the group organized all members to hold a special study meeting to earnestly study and understand the communique of the first plenary session of the 20th central Committee of the communist party of China and the revision of the party constitution. Jiang Xiaomeng, Secretary of the Party committee of the group, stressed at the study meeting that the 20th National Congress of the Communist Party of China has drawn a grand blueprint for building a socialist modern country in an all-round way, opened a new chapter in the era of national development, and pointed out the direction for the future development of enterprises. Party organizations at all levels of the group should pay full attention to and earnestly implement it, actively organize party members and cadres to learn the spirit of the spirit of the 20th National Congress, And to guide the future work practice.
2022
11-01
Spike Party Members and Cadres Watch the Opening Meeting of the 20th Congress
At 10 a.m. on October 16, the 20th National Congress of the Communist Party of China was solemnly opened in the Great Hall of the People in Beijing. Xi Jinping delivered a report to the Party's 20th National Congress on behalf of the 19th Central Committee. The group company attaches great importance to and carefully deploys, and organizes all party members and management backbones of the group headquarters and subsidiaries to watch the live broadcast of the opening meeting through the Internet, TV and other methods.
2022
10-23
Jiang Xiaomeng was hired as the "Shuanglong Escort" entrepreneurial mentor.
On September 16, Jiang Xiaomeng, Secretary of the Party committee and chairman of the group company, was employed as the entrepreneurial mentor of "Shuanglong escort" at the launching ceremony of the special action of "Shuanglong escort steady progress and quality improvement" held in Jinhua City and the promotion meeting of innovative products of key talent enterprises in Jinhua City.
2022
09-27
From August 18th to 19th, the 12th Congress of the Zhejiang Federation of Industry and Commerce was held in Hangzhou, and the 12th leadership of the Provincial Federation of Industry and Commerce was elected. Jiang Xiaomeng, Secretary of the Party Committee and Chairman of the Group, was re-elected as Vice President of Zhejiang Chamber of Commerce.
2022
09-01
Contact Us
No. 88 Wujiang East Road, Jinhua City, Zhejiang Province, China
Tel: +86-579-82326868
Fax : +86-579-82324666
©2023 Zhejiang Jianfeng Group Co., Ltd. Powered by: www.300.cn SEO Business License
SAF Coolest v1.2 设置面板 SHJSS-AHDB-FSSQE-ZSW
无数据提示
Sorry, the current column has no content !
You can view other columns or return to Home Page