Yunnan Jianfeng strengthens daily safety management
Release time:
2021-05-06
In order to further supervise and standardize the on-site safety management, Yunnan Jianfeng organized personnel to carry out special inspection of safety tools and appliances in the power room and special inspection of flammable, explosive and pulverized coal preparation systems. The inspection team went to the power rooms of each system to check the daily management contents including the fixed placement of the safety tools and equipment rooms, whether the tools and equipment ledgers are classified and numbered uniformly, the records of entering and leaving the warehouse, and the regular inspection of tools and equipment, etc., and focused on the careful inspection of the most used safety tools and equipment in daily work. During the inspection, the staff conducted a detailed inspection and verification of the wear and tear of safety tools and instruments in each power room under the company's jurisdiction and the date of passing the test to prevent unqualified tools and instruments from flowing into the operation site. For flammable, explosive and pulverized coal preparation system areas, the inspectors are responsible and meticulous, and do not miss any dead corner, and record while checking. After the inspection, the HSE Department will summarize the inspection results and sort them out item by item to provide basis for rectification of each department.
Combined with the construction progress of the raw meal final grinding roller press renovation and the construction arrangement of the power grid line,
4# October12 , the clinker system of Yunnan Jianfeng Cement Company was stopped for overhaul. In order to ensure the safety of maintenance and technical renovation construction, on the afternoon of 4 10 , Yunnan peak organized training on the safety control implementation plan for clinker system equipment, electrical and process maintenance, focusing on the implementation of safety and environmental protection work requirements and relevant measures in this maintenance. the safety and environment department arranged on-site safety control measures and on-site supervision organization actions, the security team explained the maintenance work content and the corresponding safety control implementation plan one by one, so that the employees have a full understanding. At the same time, in view of the recent situation that there are many outsourcing workers for equipment maintenance and renovation, on January 22, 23, Yunnan Peak organized the on-site leaders of outsourcing units to learn safety knowledge. Tan Guojian, deputy general manager of Yunnan Jianfeng, analyzed the reasons for the current safety irregularities, and required the person in charge of on-site construction safety to do a good job of publicity and education, everyone to participate in the work risk assessment, and the management personnel to supervise and manage the assessment in a timely and effective manner. Eliminate the negative attitude of employees who are afraid of trouble and try to save trouble, and require everyone to take small things as big things and attract enough attention to avoid potential safety hazards, ensure that there is no accident on the maintenance and technical renovation site.
The quality of lubricating oil has always been one of the difficulties in equipment management. After long-term use, the color, density, viscosity, water content and mechanical impurity content of the oil will change. If these indicators exceed a certain threshold, the performance will be greatly reduced, which will cause hidden dangers to the safe operation of the equipment. At present, the waste heat power generation system turbine lubricating oil has been used continuously for 7 years. Originally, the basis for judging the replacement of lubricating oil for most equipment in Yunnan Peak was based on experience or the period provided by suppliers. Due to differences in operating conditions and environment, the judgment results often had large deviations, either causing waste if the equipment was replaced earlier, or bringing hidden dangers to the safe operation of the equipment if the equipment was replaced later. In particular, large-scale dilute oil stations have the characteristics of being responsible for more lubrication points and more oil volume, and this contradiction is particularly prominent. To this end, Yunnan Peak specially commissioned a professional third-party testing agency to test the turbine lubricating oil of the waste heat power generation system. This not only provides decision-making basis for equipment management personnel to carry out lubrication management and maintenance, avoid serious lubrication failure and mechanical failure, but also avoids the increase of operating cost caused by premature replacement. (Liu Fengbin
nd Floor Xu XinChen Shiye)
More information
Peak re-listed China's top 100 cement production capacity Daye peak won the "smart factory leader"
On July 11-12, the 2022 China Cement Industry Summit and TOP100 Award Ceremony organized by China Cement Network, an authoritative media of China's cement industry, was held in Hangzhou. Jianfeng Group once again ranked among the top 100 cement clinker production capacity in China.
2022
08-04
On the afternoon of July 12, the party Committee of the group company held a special meeting attended by party Committee members, senior and middle-level management backbones, heads of grass-roots party organizations and all party members of the group headquarters to learn and convey the spirit of the 15th party congress of the communist party of China in Zhejiang province.
2022
07-24
On the morning of July 1, more than 40 members of the group's party committee, party members of various branches of the group headquarters, and party members of subordinate enterprise branches went to the Shuanglong Hydropower Station, the Red Education Base of Jinhua City, to receive party spirit and revolutionary tradition education.
2022
07-14
Vocational skill level identification examination!
On June 16 and 18, the theoretical and practical examinations for the determination of professional skill level in the peak pharmaceutical sector were held successively in Jinxi pharmaceutical factory. The independent identification of vocational skill level includes three occupations (types of work): pharmaceutical preparation worker, chemical inspector and organic synthesis worker, basically covering the main posts in the pharmaceutical sector, with a total of 125 employees signing up for the identification.
2022
06-21
On June 16, the Jianfeng Pharmaceutical Quality Research and Development Party Branch and the Jinhua Vocational Skills Management Service Center Party Branch held a signing ceremony in Jinxi Factory to establish a party building alliance.
2022
06-21
Jinhua Mayor Xing Zhihong to Peak Research
On the afternoon of June 1, Jinhua Mayor Xing Zhihong, Wucheng District Party Committee Secretary Gao Feng, District Mayor Hu Yuxian, and heads of the Municipal Economic and Information Bureau, Development and Reform Bureau and other departments went to the group headquarters to discuss and exchange with the leaders of the group company to understand the development of the enterprise. Solicit opinions and suggestions from enterprises on government work. After understanding the current business situation of the peak, Xing Zhihong pointed out that focus, follow the right path, frontier, steady, is the peak to long-term prosperity of the magic weapon, must continue to adhere.
2022
06-13
Contact Us
No. 88 Wujiang East Road, Jinhua City, Zhejiang Province, China
Tel: +86-579-82326868
Fax : +86-579-82324666
©2023 Zhejiang Jianfeng Group Co., Ltd. Powered by: www.300.cn SEO Business License
SAF Coolest v1.2 设置面板 SHJSS-AHDB-FSSQE-ZSW
无数据提示
Sorry, the current column has no content !
You can view other columns or return to Home Page