Daye Peak Equipment Technical Transformation Bonus
Release time:
2020-07-22
Daye spike equipment technical reform dividend
News due to the new crown pneumonia epidemic prevention and control shutdown period, Daye spike cement company for the shortcomings found in the past production, carried out a more comprehensive equipment technical reform. Since the resumption of production, with the gradual recovery of Hubei cement market, Daye peak production, sales work tends to be normal, the effectiveness of equipment technical reform is also increasingly apparent. After the Spring Festival of
, Daye Peak focused on a series of technical reforms such as "changing two warehouses to three warehouses", "optimizing the feeding device of roller press" and "lithium slag feeding system" for the cement mill system. Cement mill 3 cake hoist, 1 , 2 grinding head hoist, the tail wheels of 1# and 2# grinding tail hoists were renovated and put into use on 3 28 . In early 4 , the upgrade and transformation of the communication system was completed and put into use. After a period of actual operation, the technical indicators of these equipment after technical transformation have been improved compared with the past, and the purpose of transformation and upgrading has been achieved. After a series of technological transformation of
cement grinding system, the output of cement grinding table increased by nearly 15 tons year on year, and the power consumption of tons of cement grinding decreased by 1.5kwh/t year on year, with obvious effect of increasing production and reducing consumption. On the basis of the renovation of the cement delivery system in 2018 , through optimized management, the Roots blower pipeline at the bottom of the cement warehouse is regularly dredged, and the ash discharge equipment is regularly maintained and maintained. The delivery efficiency of the warehouse is further improved, and the daily delivery capacity is significantly improved, which can fully meet the requirements of cement output. Since
Daye Peak was put into production, the tail wheel of the cement mill system hoist has been in the form of a pressure bar type counterweight box, with counterweight or tooth occlusion at the top of the tail. During operation, the counterweight also causes loose side sealing and material leakage, resulting in fast bearing wear, frequent maintenance, heavy maintenance workload, and waste of cement and environmental pollution. For this reason, Daye Peak removed 5 external counterweight tail wheels of hoists during technical renovation, modified built-in counterweight tail wheels, and adopted maintenance-free wear-resistant sleeves. The modified tail wheel runs briskly, the motor temperature rises low, and the current is stable. The problem of ash leakage and material leakage is completely solved. The transformation not only reduces the labor intensity of employees, but also protects the environment and provides a guarantee for the stable operation of the hoist.
Daye Peak General Step-down Station was built in 2007 and has been in operation for 12 years. With the passage of time and the aging of the equipment, the channel is not smooth, the operation is delayed, the main transformer upshift is not timely, the capacitor is closed, the opening switch does not respond, and the instruction of 10KV switch cabinet is not executed or delayed. Seriously affect the safe operation of power distribution equipment. The communication management machine, GPS timing system, 10KV relay protection device, background power monitoring and management software, etc. are upgraded and transformed, which not only improves the communication speed and data acquisition, but also improves the response of telemetry, remote signaling and remote control, ensures the safety and reliability of the communication system and ensures the safe and stable operation of power distribution equipment. (Wang Yiyan Liu Chao Shi Zhangliang)
More information
Publicity of Environmental Protection Acceptance for Completion of Kiln End Flue Gas Desulfurization Project of daye peak cement co., ltd. According to the requirements of the Interim Measures for Environmental Protection Acceptance for Completion of Construction Projects (No.4 [2017] of the State Environmental Regulations) issued by the Ministry of Environmental Protection, the environmental protection acceptance information of "Kiln End Flue Gas Desulfurization Project" of daye peak cement co., ltd. is now publicized. Basic Information of 1. Project Project Name: Kiln End Flue Gas Desulfurization Project Construction Unit: daye Jianfeng Cement Co., Ltd. Project Construction Location: Yongguang Village, Baoan Town, daye city, nature of the project in the existing plant area of daye Jianfeng Cement Co., Ltd.: The construction content of the technological transformation project is: This technological transformation project is mainly to build a wet desulfurization system for kiln end gas of the company's existing 4000t cement clinker production line, adopting limestone-gypsum wet flue gas desulfurization process. The project covers a total area of 500 m2, with a new construction area of about 450 m2. It mainly builds desulfurization complex building, flue gas system, SO2 absorption system, limestone powder conveying and limestone slurry preparation system, process water system, gypsum dehydration system and supporting pipelines. Power supply, water supply, compressed air and other public works rely on the existing plant. Total investment and environmental protection investment: the total investment of the project is 10.37 million yuan, all of which are environmental protection investment. The project was entrusted to Huangshi Yangtze River Environmental Engineering Design and Research Institute to carry out environmental impact assessment in September 2017. On November 16, 2017, Daye Municipal Environmental Protection Bureau issued a reply with YEHAN [2017] No. 354. Implementation of 2. environmental protection measures The scope of this acceptance is the flue gas desulfurization system and supporting facilities at the end of the kiln. (1) Exhaust gas pollution
2020
07-31
Spike New Drug Approved for Registration
On April 16, Jianfeng Pharmaceutical Company received the approval and issuance of Olopatadine Hydrochloride Eye Drops "Drug Registration Approval" (approval number: 2019S00296) approved by the State Drug Administration. Olopatadine hydrochloride eye drops is mainly used to treat the signs and symptoms of allergic conjunctivitis. It is a mast cell stabilizer and a relatively selective histamine H1-receptor antagonist. It can inhibit type I immediate allergic reactions in vivo and in vitro experiments. At present, the product has been included in the "National Basic Medical Insurance, Work Injury Insurance and Maternity Insurance Drug Catalog (2017 Edition)" and classified as Class B. According to the relevant data of IMS database, in 2018, the global sales of olopatadine hydrochloride eye drops were about 0.37 billion US dollars, and the sales in China were about 10.232 million US dollars. Spike Pharmaceuticals already has the corresponding production line, this time to obtain the registration approval, marking Spike Pharmaceuticals has the qualification to carry out the production and sales of olopatadine hydrochloride eye drops, will further enrich the product line of Spike Pharmaceuticals, help to enhance the competitiveness of the company's pharmaceutical business. (Xia Yingpin)
2020
07-31
Spike New Drug Approved for Registration
On April 16, Jianfeng Pharmaceutical Company received the approval and issuance of Olopatadine Hydrochloride Eye Drops "Drug Registration Approval" (approval number: 2019S00296) approved by the State Drug Administration. Olopatadine hydrochloride eye drops is mainly used to treat the signs and symptoms of allergic conjunctivitis. It is a mast cell stabilizer and a relatively selective histamine H1-receptor antagonist. It can inhibit type I immediate allergic reactions in vivo and in vitro experiments. At present, the product has been included in the "National Basic Medical Insurance, Work Injury Insurance and Maternity Insurance Drug Catalog (2017 Edition)" and classified as Class B. According to the relevant data of IMS database, in 2018, the global sales of olopatadine hydrochloride eye drops were about 0.37 billion US dollars, and the sales in China were about 10.232 million US dollars. Spike Pharmaceuticals already has the corresponding production line, this time to obtain the registration approval, marking Spike Pharmaceuticals has the qualification to carry out the production and sales of olopatadine hydrochloride eye drops, will further enrich the product line of Spike Pharmaceuticals, help to enhance the competitiveness of the company's pharmaceutical business. (Xia Yingpin)
2020
07-31
Contact Us
No. 88 Wujiang East Road, Jinhua City, Zhejiang Province, China
Tel: +86-579-82326868
Fax : +86-579-82324666
©2023 Zhejiang Jianfeng Group Co., Ltd. Powered by: www.300.cn SEO Business License
SAF Coolest v1.2 设置面板 SHJSS-AHDB-FSSQE-ZSW
无数据提示
Sorry, the current column has no content !
You can view other columns or return to Home Page