I'm on the spike for thirty years
Release time:
2020-08-14
I stepped onto the stage as a representative of the old employee who served the peak for more than
years to receive souvenirs from the leaders of the group company at the peak 30 years 11 3 and the peak entrepreneurship 60 anniversary party. At that moment, my excitement was hard to express, and I also remembered the little things since I entered the peak.
I remember that it was 1988 8 28 . I stepped into the peak with excitement. After a week of training, I was assigned to the raw material workshop to fight back and break as a crushing worker. At that time, in the vertical kiln cement plant, because there was no large crusher, the particle size of limestone entering the crusher could not be greater than 30 cm, and those larger than the requirements must be crushed by the conveyor chain plate machine, thus having our type of work. Due to inexperience, after a shift, my two calves were full of wounds pierced and marked by splashed stone debris, and there was blood everywhere. It was miserable. Fortunately, under the careful guidance of the old master, after a few days of training and mastering the skills, the work will save more effort and less injuries.
Six months later, my efforts were recognized by the workshop management and I was transferred to the workshop maintenance team as a repairman. Under the leadership of the masters, I quickly mastered some basic knowledge of equipment maintenance, and was assigned to be a maintenance worker on duty in less than three months. At that time, there was a lot of equipment renovation and upgrading work in the factory, and the gold mud factory was preparing to apply for a national secondary enterprise. perhaps because of a certain understanding and previous carpentry work, the spare parts I made were more practical and beautiful than those made by others, so the workshop adjusted my work, mainly making spare parts and on-site renovation, to control running, running, dripping and leaking. According to the backward production technology at that time, we were able to clean up the workshop floor with mops and verify the equipment hygiene inspection with white gloves. The efforts we made can be imagined. It is also with the concerted efforts of all the staff that we have achieved very good results.
In January of 1990 , I was transferred to the Group's mechanical and electrical power plant to learn sheet metal technology from my master. That was the period of vigorous development after the formation of the group. The workload of plate making was very large, and it was also the best time for our young people to learn technology. Every day, I did a good job of lofting and marking, and went to rob the cutting gun and electric welding pliers, "forcing" the electric welder to teach me gas cutting and electric welding-due to the relatively fine division of labor at that time, the sheet metal worker was responsible for lofting, marking and patching. gas cutting and welding were all the work of the electric welder, and everyone's code had to be typed after the workpiece was completed and accepted. if the quality of gas cutting and welding was poor, the electric welder. In this way, after ten years of hard work, my technical level and organizational ability have been improved and recognized by my colleagues. 2001
1 , I became deputy director of the mechanical and electrical workshop. This is not only a change of position, but also a change of function. In the past, you only need to do it yourself. When you become a deputy director, you not only need to be able to do it yourself, but also lead the workshop staff to work hard, improve the overall skill level, and improve the maintenance. Quality and work efficiency. In those years, the technical transformation, maintenance, and repair of the old and waste in the mechanical and electrical workshop were carried out vividly and won a lot of praise. With the development of the peak, we have also got more and more room for development.
5 April 8 , I walked out of Jinhua with uneasy feelings and reported to Fuyang Jianfeng Dengcheng Cement Co., Ltd., the first stop of the peak "out of Jinhua to run cement", where there was our first new dry rotary kiln production line of the peak. When I came to a strange working environment, came into contact with a strange production process, and saw such a large equipment for the first time, I was a little shocked and soberly realized that I had to learn again. According to the work arrangement, I was initially responsible for the management of the mechanics. During that time, I followed the technicians of the equipment manufacturer to debug the machine every day, constantly learning and groping, and the concept of equipment management completely changed. In a few years, I have grown from a mechanic supervisor to an equipment engineer. The equipment management level of the enterprise is getting higher and higher. The effective operation rate and the control level of machine material consumption are in the forefront of peer enterprises.
2015
1 , I went out of Zhejiang and came to Yunnan Jianfeng Cement Co., Ltd. to take on the equipment preservation work of the whole enterprise. This is a new challenge for me. It happens that the enterprise is adjusting its management mode, from full participation in equipment management to security personnel responsible for equipment operation, maintenance, inspection and management. My work content has increased and my responsibilities have become heavier. To this end, I started from the aspects of working plan formulation, strengthening equipment inspection, carrying out predictive maintenance, training staff skills, improving maintenance quality, etc., and worked together with my colleagues, and the operation rate of the main engine increased year by year. I changed many positions and made some achievements in the peak
years, but what makes me more happy is my personal progress in this process. He entered the factory in 1988 , completed the Senior high school study of night school in 1992 , passed the senior worker in 1998 , was appraised as a technician in 2000 , obtained the junior college diploma in 2003 , was appraised as a senior technician in 2007 , and obtained the qualification of equipment engineer in 2009 , step by step, I grew up with the spikes. Here, I would like to sincerely thank the peak to give the platform, so that I can witness their growth, fully display their talents. In the days to come, I will work with my colleagues to make continuous efforts for the grand goal of "one hundred years peak! (Lou Xuxin)
More information
Spike Cable Enters South American Market
Recently, a batch of 2100-pair communication cables produced by Peak Cable Company for Venezuelan customers have been completed and will be shipped in cabinets. This is the company's first export business in the South American market. In recent years, under the general trend of "light in and copper out" in the domestic market, Jianfeng Cable Company has taken the initiative to open up foreign markets that still use copper-core communication cables. While making use of its own production advantages to actively cooperate with domestic industry and trade enterprises to carry out foreign trade processing of communication cables, it has made great efforts to expand its own export business through foreign trade platforms and participation in exhibitions. Since the beginning of this year, the cable company has overcome the adverse effects of the new coronary pneumonia epidemic, actively looking for foreign customers for business negotiations, and won orders from Vietnamese customers shortly after the resumption of work. It is understood that in all the export business of cable companies this year, self-operated export business has accounted for about half, and the export direction is mainly Southeast Asia. The successful completion of the Venezuelan customer orders for the future further development of Colombia, Argentina, Peru, Chile and other South American countries to lay a good foundation. (Hu Longgang, Huang Yuan)
2020
11-12
Daye peak "war epidemic" work was commended by Hubei Province, Huangshi City
Recently, Daye Peak Cement Company won the commendation of Hubei Provincial Federation of Industry and Commerce, Hubei General Chamber of Commerce, Huangshi City Federation of Industry and Commerce, Huangshi City Chamber of Commerce, Huangshi City People's Government Poverty Alleviation and Development Office and other relevant units for its outstanding achievements in the prevention and control of the new coronary pneumonia epidemic. Since the beginning of this year, in the face of the new coronary pneumonia epidemic, Daye Peak has fully implemented the important instructions of the municipal government on the prevention and control of the new coronary pneumonia epidemic and the decision-making and deployment of poverty alleviation, obeying the overall situation, not only donating money to the Daye Municipal People's Government for the first time to help prevent and control the epidemic, but also actively do a good job in the prevention and control of the internal epidemic, and to resume production, and earnestly implement the municipal party committee and municipal government on the response to the impact of the new coronary pneumonia epidemic to carry out "two help two help" and "three get one stable" work requirements, paired to help the surrounding rural part of the population has not been lifted out of poverty, to help poor areas to solve the problem of agricultural and sideline products sales, for the city's decisive fight against poverty to contribute. (Yang Huiping, Zhang Qingyu)
2020
11-12
Liu Haiping, Vice Mayor of Pu'er, went to Yunnan Jianfeng for investigation
On the morning of November 3, Liu Haiping, member of the standing Committee of the Pu'er Municipal CPC Committee and vice mayor of the municipal government, and responsible persons of relevant departments went to Yunnan Jianfeng cement Company for investigation and discussion with Zhou Jiping, general manager of Yunnan Jianfeng, and Fang Xuhua, deputy general manager, on such topics as improving the business environment of Pu'er City and the difficulties encountered in the production and operation of enterprises. During the exchange, Zhou Jiping reported on the production and operation of the company this year, as well as the impact of the new coronary pneumonia epidemic on the market and the difficulties encountered in the production and operation process. Liu Haiping fully affirmed the efforts and achievements made since the resumption of work and production in Yunnan Peak, and said that a good business environment is very important for economic development and enhancing the vitality of enterprises. The functional departments of Pu'er government at all levels will continue to optimize various tasks, improve work efficiency, and provide services and guarantees for the development of enterprises. Liu Haiping hopes that Yunnan Jianfeng, as a key enterprise and "benchmark enterprise" in Pu'er City, will play a pioneering and exemplary role and jointly promote the construction of the business environment in Pu'er City. (qi jianmei)
2020
11-12
On the afternoon of November 10, the Party committee of the group company held an enlarged meeting to learn the spirit of the Fifth Plenary Session of the 19th CPC Central Committee and make arrangements for the next step of study, publicity and implementation. At the meeting, Jiang Xiaomeng, Secretary of the Party committee and chairman of the group company, together with all members of the Party committee, members of the management team of the group company, heads of functional departments and some party members, studied the communique of the Fifth Plenary Session of the 19th CPC Central Committee and interpreted the spiritual points of the plenary session. Jiang Xiaomeng pointed out that the Fifth Plenary Session of the 19th Central Committee of the Communist Party of China, held in Beijing from October 26 to 29, is a very important meeting held at an important historical moment when the victory of building a moderately prosperous society in an all-round way is in sight and the new journey of building a modern socialist country in an all-round way is about to begin. It fully embodies the foresight of the Party Central Committee with Comrade Xi Jinping as the core in planning the future and the historical responsibility of carrying forward the past, and profoundly points out the guidelines, objectives, tasks, and strategic measures for China's development in the coming period. It is of great and far-reaching significance to mobilize and encourage the whole Party and the people of the whole country to continue to seize the important strategic opportunity period and promote the comprehensive construction of a socialist modern country. In response to the goals and some hot issues raised in the plenary communiqué, such as how to achieve the 2035 long-term goal, the key goals of economic and social development during the "14th Five-Year Plan" period, why the emphasis is on adhering to the party's overall leadership and strengthening the centralized and unified leadership of the party Central Committee. The main risks and challenges facing economic development in the next five years, how to achieve scientific and technological self-reliance, promote innovation, how to understand the construction, jiang Xiaomeng quoted the answers given by the leaders of relevant central ministries and commissions at the press conference of the plenary session. Jiang Xiaomeng emphasized that China's current development environment is facing profound and complex changes, and there are new developments and changes in opportunities and challenges. The guiding ideology and principles of economic and social development during the "14th Five-Year Plan" period proposed by the plenary session, and the economy during the "14th Five-Year Plan" period The main goals of social development will have a direct impact on the future development of our enterprises. Party organizations at all levels and all employees at the peak must study and study carefully, find the entry point and direction of work, make every effort to complete the annual work goals, and make preparations for the next year. The person in charge of the party organization of the company's overseas enterprises participated in the study through the video conference system. (this newspaper reporter)
2020
11-12
Zhou Zhou, executive vice governor of Qiandongnan Prefecture, sent a message to Huang Ping Jianfeng: fully promote the normalization of production and marketing to make new contributions to Huang Ping's overall well-off society. On October 27, Zhou Zhou, executive vice governor of Qiandongnan Prefecture, Guizhou Province, Yang Zhi, head of Huangping County, and relevant officials of the state and county governments went to Guizhou Huangping Jianfeng Cement Company to investigate and understand the project construction and production situation, and hope that the enterprises will develop as soon and promote regional economic development. Hu Hongwei, general manager of Huang Ping Jianfeng, and other members of the management team made a report on the overall work since the construction of the project started, and accompanied Zhou Zhou Zhou and his party to visit the production line site. In the central control room, Hu Hongwei to Zhou Zhou
2020
11-03
Zhang Xinyu, Vice Mayor of Jinhua City, hopes that Jianfeng Pharmaceutical will aim at cutting-edge science and technology to speed up the development of enterprises. On the afternoon of October 16, Zhang Xinyu, Vice Mayor of Jinhua City, and his party went to the construction site of Jianfeng Pharmaceutical's internationalization project of producing 2 billion pieces of solid preparations annually to conduct research. Accompanied by Huang Jinlong, deputy general manager of the group company and general manager of the pharmaceutical company, and Shen Quan, deputy general manager of the pharmaceutical company, Zhang Xinyu and his entourage visited the preparation workshop under construction and affirmed the civilized construction and safety management of the site. Huang Jinlong introduced the basic situation of the project to Zhang Xinyu and his party. Knowing that Jianfeng Pharmaceutical has introduced world-class production equipment and advanced technology to build a high-end preparation manufacturing platform in order to achieve industrial upgrading, Zhang Xinyu expressed his appreciation and encouraged Jianfeng Pharmaceutical to gain a foothold in China, aim at the world's cutting-edge technology, and accelerate the pace of enterprise development. Continuously enhance the overall competitiveness of the enterprise. (Wang xuesheng/Wen Zhou hengbin/photo)
2020
11-03
Contact Us
No. 88 Wujiang East Road, Jinhua City, Zhejiang Province, China
Tel: +86-579-82326868
Fax : +86-579-82324666
©2023 Zhejiang Jianfeng Group Co., Ltd. Powered by: www.300.cn SEO Business License
SAF Coolest v1.2 设置面板 SHJSS-AHDB-FSSQE-ZSW
无数据提示
Sorry, the current column has no content !
You can view other columns or return to Home Page