News Center

Home page

Peak Report

News reports

I'm on the spike for thirty years

Release time:

2020-08-14

I stepped onto the stage as a representative of the old employee who served the peak for more than

years to receive souvenirs from the leaders of the group company at the peak 30 years 11 3 and the peak entrepreneurship 60 anniversary party. At that moment, my excitement was hard to express, and I also remembered the little things since I entered the peak.

I remember that it was 1988 8 28 . I stepped into the peak with excitement. After a week of training, I was assigned to the raw material workshop to fight back and break as a crushing worker. At that time, in the vertical kiln cement plant, because there was no large crusher, the particle size of limestone entering the crusher could not be greater than 30 cm, and those larger than the requirements must be crushed by the conveyor chain plate machine, thus having our type of work. Due to inexperience, after a shift, my two calves were full of wounds pierced and marked by splashed stone debris, and there was blood everywhere. It was miserable. Fortunately, under the careful guidance of the old master, after a few days of training and mastering the skills, the work will save more effort and less injuries.

Six months later, my efforts were recognized by the workshop management and I was transferred to the workshop maintenance team as a repairman. Under the leadership of the masters, I quickly mastered some basic knowledge of equipment maintenance, and was assigned to be a maintenance worker on duty in less than three months. At that time, there was a lot of equipment renovation and upgrading work in the factory, and the gold mud factory was preparing to apply for a national secondary enterprise. perhaps because of a certain understanding and previous carpentry work, the spare parts I made were more practical and beautiful than those made by others, so the workshop adjusted my work, mainly making spare parts and on-site renovation, to control running, running, dripping and leaking. According to the backward production technology at that time, we were able to clean up the workshop floor with mops and verify the equipment hygiene inspection with white gloves. The efforts we made can be imagined. It is also with the concerted efforts of all the staff that we have achieved very good results.

In January of 1990 , I was transferred to the Group's mechanical and electrical power plant to learn sheet metal technology from my master. That was the period of vigorous development after the formation of the group. The workload of plate making was very large, and it was also the best time for our young people to learn technology. Every day, I did a good job of lofting and marking, and went to rob the cutting gun and electric welding pliers, "forcing" the electric welder to teach me gas cutting and electric welding-due to the relatively fine division of labor at that time, the sheet metal worker was responsible for lofting, marking and patching. gas cutting and welding were all the work of the electric welder, and everyone's code had to be typed after the workpiece was completed and accepted. if the quality of gas cutting and welding was poor, the electric welder. In this way, after ten years of hard work, my technical level and organizational ability have been improved and recognized by my colleagues. 2001

1 , I became deputy director of the mechanical and electrical workshop. This is not only a change of position, but also a change of function. In the past, you only need to do it yourself. When you become a deputy director, you not only need to be able to do it yourself, but also lead the workshop staff to work hard, improve the overall skill level, and improve the maintenance. Quality and work efficiency. In those years, the technical transformation, maintenance, and repair of the old and waste in the mechanical and electrical workshop were carried out vividly and won a lot of praise. With the development of the peak, we have also got more and more room for development.

2004

5 April 8 , I walked out of Jinhua with uneasy feelings and reported to Fuyang Jianfeng Dengcheng Cement Co., Ltd., the first stop of the peak "out of Jinhua to run cement", where there was our first new dry rotary kiln production line of the peak. When I came to a strange working environment, came into contact with a strange production process, and saw such a large equipment for the first time, I was a little shocked and soberly realized that I had to learn again. According to the work arrangement, I was initially responsible for the management of the mechanics. During that time, I followed the technicians of the equipment manufacturer to debug the machine every day, constantly learning and groping, and the concept of equipment management completely changed. In a few years, I have grown from a mechanic supervisor to an equipment engineer. The equipment management level of the enterprise is getting higher and higher. The effective operation rate and the control level of machine material consumption are in the forefront of peer enterprises.

2015

1 , I went out of Zhejiang and came to Yunnan Jianfeng Cement Co., Ltd. to take on the equipment preservation work of the whole enterprise. This is a new challenge for me. It happens that the enterprise is adjusting its management mode, from full participation in equipment management to security personnel responsible for equipment operation, maintenance, inspection and management. My work content has increased and my responsibilities have become heavier. To this end, I started from the aspects of working plan formulation, strengthening equipment inspection, carrying out predictive maintenance, training staff skills, improving maintenance quality, etc., and worked together with my colleagues, and the operation rate of the main engine increased year by year. I changed many positions and made some achievements in the peak

years, but what makes me more happy is my personal progress in this process. He entered the factory in 1988 , completed the Senior high school study of night school in 1992 , passed the senior worker in 1998 , was appraised as a technician in 2000 , obtained the junior college diploma in 2003 , was appraised as a senior technician in 2007 , and obtained the qualification of equipment engineer in 2009 , step by step, I grew up with the spikes. Here, I would like to sincerely thank the peak to give the platform, so that I can witness their growth, fully display their talents. In the days to come, I will work with my colleagues to make continuous efforts for the grand goal of "one hundred years peak! (Lou Xuxin)

More information

Peak natural products among the top 20 scientific and technological innovation in TEDA

A few days ago, Tianjin Jianfeng Natural products Research and Development Co., Ltd. stood out among nearly 35000 enterprises in Tianjin Development Zone and won the honor of "Top 20 Scientific and technological Innovation Enterprises of 2015. The selection criteria for the top 20 scientific and technological innovation enterprises in Tianjin Economic and Technological Development Zone mainly include: they have won science and technology awards or patent awards in 2015, as well as other awards above the provincial level; they have obtained the qualification certification or approval of research and development institutions above the provincial level; in 2015, the number of invention and utility model patent applications and authorizations was large, totaling more than 15; in 2015, they were supported by national or Tianjin key science and technology plans; scientific research achievements have made significant progress and technology. According to the above standards, Jianfeng Natural Products Company has not only won the second prize of Tianjin Science and Technology Innovation Project Award for the achievements of "Tianjin Plant Waste Reutilization Technology Engineering Center Construction", but also completed the process research of grape seed extract and ginsenoside to pesticide residues, and formulated the international business standard of grape seed extract (grape seed oligomeric proanthocyanidins). In order to better carry out the pilot experiment, large-scale technical transformation was carried out on the second workshop, and the process optimization of extracting anthocyanins from blueberries has been carried out. At the same time, the main business income, operating profit, tax revenue and other economic indicators of peak natural products company in 2015 have increased significantly year-on-year. Relying on the advantages of excellent quality, good efficiency, great contribution, safety and environmental protection, and good social responsibility, Jianfeng Natural Products Company successfully passed the review and became one of the "Top 20 Scientific and Technological Innovation Enterprises in 2015" in Tianjin Development Zone. (

2020

07-31

Peak natural products among the top 20 scientific and technological innovation in TEDA

2020

07-30

Peak pharmaceutical "enterprise information construction project" through the acceptance

The "Enterprise Informatization Construction Project" of Jianfeng Pharmaceutical Company was included in the list of key projects of "Integration of Industrialization and Industrialization" (high-level and in-depth combination of informatization and industrialization) in Jinhua City in 2015, and successfully passed the on-site acceptance of the expert group on the morning of May 18. The main contents of the "enterprise information construction project" of the pharmaceutical company include: the tank farm control system, which solves the problem of closed metering and transportation of organic solvents between the tank farm and the production area, can automatically realize the terminal metering setting, and effectively ensure the safety and environmental protection requirements of the tank farm operation; The air conditioning automatic control system realizes the control of the temperature, humidity and room pressure difference in the air conditioning area through the PLC digital-to-analog conversion of the upper computer and lower computer and the terminal actuator regulator, ensure the cleanliness requirements of the production area environment; The online particle monitoring software system automatically adjusts to the standard flow through the upper computer, vacuum system, laser sensor and isodynamic sampling probe, etc. through the flow detector device and key orifice plate inside each sensor, monitors the temperature, humidity, particles, planktonian bacteria, room pressure difference, etc., implements dynamic management, and realizes visual monitoring of the production process environment. MRP production management system, it makes it easier for the warehouse, workshop, and management personnel to obtain information about the flow of materials in the production process, the implementation of production plans, and product inventory. During the on-site acceptance on the 18th, the acceptance team composed of the Information Department of the Municipal Economic and Information Commission, the Economic and Development Bureau of the Development Zone, the Municipal Information Promotion Association and professors of Zhejiang Normal University checked the contracts of each system software, purchase and transfer records, training records, and problem records in project implementation,

2020

07-31

Peak natural products among the top 20 scientific and technological innovation in TEDA

2020

07-31

< 1...58 59 60 61 > 跳转到页