News Center

Home page

Peak Report

News reports

I'm on the spike for thirty years

Release time:

2020-08-14

I stepped onto the stage as a representative of the old employee who served the peak for more than

years to receive souvenirs from the leaders of the group company at the peak 30 years 11 3 and the peak entrepreneurship 60 anniversary party. At that moment, my excitement was hard to express, and I also remembered the little things since I entered the peak.

I remember that it was 1988 8 28 . I stepped into the peak with excitement. After a week of training, I was assigned to the raw material workshop to fight back and break as a crushing worker. At that time, in the vertical kiln cement plant, because there was no large crusher, the particle size of limestone entering the crusher could not be greater than 30 cm, and those larger than the requirements must be crushed by the conveyor chain plate machine, thus having our type of work. Due to inexperience, after a shift, my two calves were full of wounds pierced and marked by splashed stone debris, and there was blood everywhere. It was miserable. Fortunately, under the careful guidance of the old master, after a few days of training and mastering the skills, the work will save more effort and less injuries.

Six months later, my efforts were recognized by the workshop management and I was transferred to the workshop maintenance team as a repairman. Under the leadership of the masters, I quickly mastered some basic knowledge of equipment maintenance, and was assigned to be a maintenance worker on duty in less than three months. At that time, there was a lot of equipment renovation and upgrading work in the factory, and the gold mud factory was preparing to apply for a national secondary enterprise. perhaps because of a certain understanding and previous carpentry work, the spare parts I made were more practical and beautiful than those made by others, so the workshop adjusted my work, mainly making spare parts and on-site renovation, to control running, running, dripping and leaking. According to the backward production technology at that time, we were able to clean up the workshop floor with mops and verify the equipment hygiene inspection with white gloves. The efforts we made can be imagined. It is also with the concerted efforts of all the staff that we have achieved very good results.

In January of 1990 , I was transferred to the Group's mechanical and electrical power plant to learn sheet metal technology from my master. That was the period of vigorous development after the formation of the group. The workload of plate making was very large, and it was also the best time for our young people to learn technology. Every day, I did a good job of lofting and marking, and went to rob the cutting gun and electric welding pliers, "forcing" the electric welder to teach me gas cutting and electric welding-due to the relatively fine division of labor at that time, the sheet metal worker was responsible for lofting, marking and patching. gas cutting and welding were all the work of the electric welder, and everyone's code had to be typed after the workpiece was completed and accepted. if the quality of gas cutting and welding was poor, the electric welder. In this way, after ten years of hard work, my technical level and organizational ability have been improved and recognized by my colleagues. 2001

1 , I became deputy director of the mechanical and electrical workshop. This is not only a change of position, but also a change of function. In the past, you only need to do it yourself. When you become a deputy director, you not only need to be able to do it yourself, but also lead the workshop staff to work hard, improve the overall skill level, and improve the maintenance. Quality and work efficiency. In those years, the technical transformation, maintenance, and repair of the old and waste in the mechanical and electrical workshop were carried out vividly and won a lot of praise. With the development of the peak, we have also got more and more room for development.

2004

5 April 8 , I walked out of Jinhua with uneasy feelings and reported to Fuyang Jianfeng Dengcheng Cement Co., Ltd., the first stop of the peak "out of Jinhua to run cement", where there was our first new dry rotary kiln production line of the peak. When I came to a strange working environment, came into contact with a strange production process, and saw such a large equipment for the first time, I was a little shocked and soberly realized that I had to learn again. According to the work arrangement, I was initially responsible for the management of the mechanics. During that time, I followed the technicians of the equipment manufacturer to debug the machine every day, constantly learning and groping, and the concept of equipment management completely changed. In a few years, I have grown from a mechanic supervisor to an equipment engineer. The equipment management level of the enterprise is getting higher and higher. The effective operation rate and the control level of machine material consumption are in the forefront of peer enterprises.

2015

1 , I went out of Zhejiang and came to Yunnan Jianfeng Cement Co., Ltd. to take on the equipment preservation work of the whole enterprise. This is a new challenge for me. It happens that the enterprise is adjusting its management mode, from full participation in equipment management to security personnel responsible for equipment operation, maintenance, inspection and management. My work content has increased and my responsibilities have become heavier. To this end, I started from the aspects of working plan formulation, strengthening equipment inspection, carrying out predictive maintenance, training staff skills, improving maintenance quality, etc., and worked together with my colleagues, and the operation rate of the main engine increased year by year. I changed many positions and made some achievements in the peak

years, but what makes me more happy is my personal progress in this process. He entered the factory in 1988 , completed the Senior high school study of night school in 1992 , passed the senior worker in 1998 , was appraised as a technician in 2000 , obtained the junior college diploma in 2003 , was appraised as a senior technician in 2007 , and obtained the qualification of equipment engineer in 2009 , step by step, I grew up with the spikes. Here, I would like to sincerely thank the peak to give the platform, so that I can witness their growth, fully display their talents. In the days to come, I will work with my colleagues to make continuous efforts for the grand goal of "one hundred years peak! (Lou Xuxin)

More information

The company requires each business segment to formulate medium-and long-term business plans.

According to our newspaper, "if an enterprise wants to develop in the long run, first of all, managers should have a long-term vision." On July 24, when general manager Yu Jianhong deployed the work for the second half of the year at the semi-annual meeting of the group company, he specifically asked all enterprises to formulate specific medium-and long-term business development plans for the next three to five years according to the industrial development trend and the group development strategy. Before making arrangements for the specific key work in the second half of the year, Yu Jianhong emphatically put forward the requirements for each business sector to formulate a business strategy plan for 2016-2018 according to the industry development trend and the group's development strategy. Yu Jianhong pointed out that the current group company's strategic decision-making and strategic development capabilities and efficiency still need to be improved. The publicity, understanding and implementation of the group's development strategy by various companies are not in place. The lack of medium and long-term business planning in each business sector restricts the business of the company. Development, cultivation of core products and profitability, construction of product brands, improvement of business scale and comprehensive strength. Last year, the group company asked the international trading company to formulate three-year work objectives and sign a three-year economic responsibility system with the company's management team. The actual effect shows that this has made the management team's management ideas clearer and more scientific and rational in terms of target setting, work arrangement and business development. For this reason, the group company put forward the requirements for the formulation of medium and long-term development plans for each business sector at this meeting. According to the industry characteristics of each business segment, market environment and other specific circumstances, the company makes requirements for the key content of the development plan of each business segment. For example, the pharmaceutical sector focuses on sales growth targets for key profitable products, product development and

2020

07-30

Condensing the heart and gathering wisdom to seek common development

Compared with the past, a new content has been added in the half year of this year-on the morning of July 24, according to the different industrial sectors of the company, the participating managers were divided into three groups: pharmaceutical industry, cement industry and other industries for special discussion. The theme of the discussion was clear in the meeting notice a week ago: under the current economic situation and industrial environment, how to maintain the improvement of corporate profitability and how to promote better and faster development of enterprises. Jiang Xiaomeng, chairman of the group, and Yu Jianhong, general manager of the group, made guiding speeches in three groups. After the group discussion, the group leaders made a summary report at the conference. Due to the clear theme of the discussion, the management personnel at the meeting were well prepared, and the sparks of ideas collided from time to time during the discussion. Due to the different industrial characteristics and market environment, the communication content of each group also has different emphasis. For example, the pharmaceutical group is most concerned about adjusting marketing strategies, handling the relationship between price and quantity, strengthening technological innovation to improve production efficiency and product quality, and subdividing professional fields to make characteristic markets, etc.; the cement group is more focused on reducing energy consumption, strengthening internal control and management optimization, improving operation efficiency, and extending to upstream and downstream industries; other industry groups have more urgent requirements for clear corporate positioning, strengthening business integration, innovating marketing models, and controlling business risks. But in the final analysis, no matter which aspect the speech focuses on, it finally falls on one point: business operations are facing huge crises and challenges, and they must undergo transformation and upgrading, seek rapid development, and highlight the siege of market competition. Some participants said that due to the correlation between the company's various industries

2020

07-31

The chairman assigned ten "homework questions" to the managers"

News from our newspaper On the afternoon of July 24, Chairman Jiang Xiaomeng put forward ten "homework questions" such as "clear development strategy and self-positioning" for managers at all levels in his concluding speech at the first half of the business analysis meeting ". Before "assigning homework", Jiang Xiaomeng first put forward three "thinking questions": what kind of company are we? What kind of management and what kind of talent team do we need? What kind of difficulties have our products and industries encountered? He pointed out that the peak is a historical, cross-industry, comprehensive joint-stock industrial company, is the product completely full competition, completely rely on their own business judgment, strategic decision-making to operate the company. Only under the framework of various laws and regulations, can we bring more wealth to employees by creating the largest living space and the best benefits. The characteristics of the enterprise, the characteristics of the industry, the historical evolution of the enterprise, and the competitive pattern of the products all directly affect the management mode of the peak. We need to absorb all kinds of talents and use their wisdom to continuously make the peak go on for a long time and achieve the dream of "100-year peak. At present, among the two main businesses of the company, the cement industry has encountered the first negative growth in 25 years, and the price has fallen to the lowest point in nearly 15 years; the increasingly strict management policies of the pharmaceutical industry have brought more challenges and tests to the enterprise. However, the crisis and opportunity always coexist, enterprises to survive and develop, it must keep pace with the times, constantly change. In view of the various changes in the internal status quo and external environment of the enterprise, Chairman Jiang Xiaomeng put forward ten requirements to the management personnel at all levels of the enterprise: the 1. should clarify the development strategy and the enterprise self

2020

07-31

Jiang Xiaomeng Yunnan Jianfeng Lectures on Party Lessons

In order to implement the requirements of the higher-level party committee secretary to give in-depth party lectures in enterprises, on July 4, Jiang Xiaomeng, secretary of the party committee and chairman of the group company, gave a special lecture on "two studies and one doing" for party members at Yunnan Jianfeng Cement Company. In the lecture, Jiang Xiaomeng started from the background, overall requirements, learning and education content, and main measures of the "two studies and one doing" activities. He hoped that all party members and cadres would understand "awe, gratitude, humility, and decent", and put forward "What should the current enterprise do" and "How should the enterprise go in the future" and other issues. Jiang Xiaomeng analyzed the future development trend of cement and pharmaceutical industries in detail, emphasized the importance of seizing opportunities, and pointed out that with the homogenization of cement industry becoming more and more serious, if we want to take the road of differentiated brand development, the core of competition is to strengthen self management and maximize the cost, so as to improve the competitive advantage. As far as Yunnan Jianfeng is concerned, it is necessary to continuously improve the level of process technology management and increase the hourly output by increasing inspection efforts. Starting from strengthening the control of raw material procurement, the quality and price should be controlled. By strengthening sales management, vigorously develop direct agents, and strive to maximize the profit per ton; By strengthening equipment maintenance, reduce equipment accidents and further reduce the consumption of machine materials; Make good use of people, while constantly tapping talents and cultivating new people, we will gradually control the total number of workers and improve labor productivity. According to the current situation and the company's development strategy, what should the party members of the peak do? Jiang Xiaomeng asked all the party members and cadres of Yunnan peak to play a good vanguard and exemplary role and take the lead in learning new knowledge, new technology and new experience.

2020

07-31

Jiang Xiaomeng Yunnan Jianfeng Lectures on Party Lessons

2020

07-31

Cum Military and Civilian Mayor Visits Jinxi Factory

On July 8, Jinhua Mayor and Military and Civilian, Deputy Mayor Sun Rongyan, Municipal Government Secretary-General Zhou Jianmin and other leaders went to Jinxi Development Zone to investigate and visit Jianfeng Pharmaceutical Jinxi Pharmaceutical Factory. The picture shows the army and the people visiting the production workshop accompanied by Shen Quan, director of the Jinxi factory. (Contributor by Zhang Mingyin)

2020

07-31

< 1...58 59 60 61 > 跳转到页